scholarly journals A Topology Optimization Based Design of Space Radiator for Focal Plane Assemblies

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6252
Author(s):  
Xiao Shen ◽  
Haitao Han ◽  
Yancheng Li ◽  
Changxiang Yan ◽  
Deqiang Mu
Keyword(s):  
Topology Optimization ◽  
Design Process ◽  
Focal Plane ◽  
Heat Dissipation ◽  
Optimization Method ◽  
Inverse Design ◽  
Initial Design ◽  
Mass Constraint ◽  
Transient Thermal ◽  
Topology Optimization Method

In this paper, to improve the heat dissipation efficiency of a radiator for focal plane assemblies, a topology optimization method is introduced into the design process. For the realization of the optimization, an objective of maximal thermal stiffness concerning the radiator is formulated. The topology optimization is performed under the same mass constraint of 2.05 kg as the initial design. To improve the manufacturability of topology optimization result, an inverse design is conducted to reconstruct a new model. In transient thermal simulation, the average maximal temperature on focal plane assemblies with a reconstructed radiator is 8.626 °C, while the average maximal temperature with the initial design is 9.793 °C. Compared to the initial design, a decrease of 1.167 °C on maximal temperature is achieved. As the heat dissipation efficiency of the proposed radiator design is improved compared to the initial design, it is meaningful in future applications.

scholarly journals Topology Optimization of Hard-Coating Thin Plate for Maximizing Modal Loss Factors

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 774
Author(s):  
Haitao Luo ◽  
Rong Chen ◽  
Siwei Guo ◽  
Jia Fu
Keyword(s):  
Topology Optimization ◽  
Objective Function ◽  
Composite Plates ◽  
Optimization Method ◽  
Hard Coating ◽  
Design Variables ◽  
Coating Composite ◽  
Damping Materials ◽  
Topology Optimization Method ◽  
Loss Factors

At present, hard coating structures are widely studied as a new passive damping method. Generally, the hard coating material is completely covered on the surface of the thin-walled structure, but the local coverage cannot only achieve better vibration reduction effect, but also save the material and processing costs. In this paper, a topology optimization method for hard coated composite plates is proposed to maximize the modal loss factors. The finite element dynamic model of hard coating composite plate is established. The topology optimization model is established with the energy ratio of hard coating layer to base layer as the objective function and the amount of damping material as the constraint condition. The sensitivity expression of the objective function to the design variables is derived, and the iteration of the design variables is realized by the Method of Moving Asymptote (MMA). Several numerical examples are provided to demonstrate that this method can obtain the optimal layout of damping materials for hard coating composite plates. The results show that the damping materials are mainly distributed in the area where the stored modal strain energy is large, which is consistent with the traditional design method. Finally, based on the numerical results, the experimental study of local hard coating composites plate is carried out. The results show that the topology optimization method can significantly reduce the frequency response amplitude while reducing the amount of damping materials, which shows the feasibility and effectiveness of the method.

Structural Topology Optimization Using Frame Elements Based on the Complementary Strain Energy Concept for Eigen-Frequency Maximization

2005 ◽  
Author(s):  
Akihiro Takezawa ◽  
Shinji Nishiwaki ◽  
Kazuhiro Izui ◽  
Masataka Yoshimura
Keyword(s):  
Topology Optimization ◽  
Cross Sections ◽  
Strain Energy ◽  
Optimization Procedure ◽  
Optimization Method ◽  
Structural Topology ◽  
Energy Concept ◽  
Conceptual Design Phase ◽  
Complementary Strain ◽  
Topology Optimization Method

This paper discuses a new topology optimization method using frame elements for the design of mechanical structures at the conceptual design phase. The optimal configurations are determined by maximizing multiple eigen-frequencies in order to obtain the most stable structures for dynamic problems. The optimization problem is formulated using frame elements having ellipsoidal cross-sections, as the simplest case. Construction of the optimization procedure is based on CONLIN and the complementary strain energy concept. Finally, several examples are presented to confirm that the proposed method is useful for the topology optimization method discussed here.

An Enhanced One-Layer Passive Microfluidic Mixer With an Optimized Lateral Structure With the Dean Effect

2015 ◽  
Vol 137 (9) ◽  
Author(s):  
Teng Zhou ◽  
Yifan Xu ◽  
Zhenyu Liu ◽  
Sang Woo Joo
Keyword(s):  
Reynolds Number ◽  
Topology Optimization ◽  
Optimization Method ◽  
Mixing Efficiency ◽  
Boolean Operation ◽  
Microfluidic Mixer ◽  
Wide Range ◽  
The One ◽  
Lateral Structure ◽  
Topology Optimization Method

Topology optimization method is applied to a contraction–expansion structure, based on which a simplified lateral flow structure is generated using the Boolean operation. A new one-layer mixer is then designed by sequentially connecting this lateral structure and bent channels. The mixing efficiency is further optimized via iterations on key geometric parameters associated with the one-layer mixer designed. Numerical results indicate that the optimized mixer has better mixing efficiency than the conventional contraction–expansion mixer for a wide range of the Reynolds number.

Sign in / Sign up

Export Citation Format

Share Document