scholarly journals Design of a Highly Efficient N-Stage Harmonic Terminated Voltage Multiplier for Wireless Power Transfer

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7203
Author(s):  
Juwan Kim ◽  
Inho Park ◽  
Hyunchul Ku
Keyword(s):  
Output Voltage ◽  
Harmonic Component ◽  
Wireless Power Transfer ◽  
Input Power ◽  
Waveform Analysis ◽  
Power Transfer ◽  
Wireless Power ◽  
Voltage Multiplier ◽  
Highly Efficient ◽  
N Stage

This paper proposes a 5.8 GHz highly efficient rectifier design using harmonic termination for wireless power transfer. The diode used to convert the received RF power to DC is a non-linear device, and a harmonic component is generated, which causes performance degradation. Therefore, in this paper, we designed a band stop filter for harmonic termination and proposed the N-stage harmonic terminated voltage multiplier (N-stage HTVM). The number of stages N can be designed differently to operate with high efficiency at various input powers for the proposed rectifier. In the proposed rectifier circuit, mathematical analysis of output DC voltage, power loss of the diode, and the power conversion efficiency (PCE) were evaluated through voltage/current waveform analysis of the diode. The design method of the filter for terminating harmonics is presented. Furthermore, the change of PCE according to the increase in the number of stages was analyzed using the equivalent model of the proposed circuit and verified through measurement. The maximum PCE of one-stage HTVM was 68% when 18 dBm of input power was applied. The DC output voltage was measured to 11.6 V. When the RF input power was 25 dBm and the load was 1500 Ω, the maximum PCE of the two-stage HTVM was 71% and the maximum DC output voltage was measured as 15.8 V. The measured performance of three-stage HTVM had a PCE of 67% and DC output voltage of 19.8 V when the input power was 30 dBm.

scholarly journals Wireless power transfer system rigid to tissue characteristics using metamaterial inspired geometry for biomedical implant applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ramesh K. Pokharel ◽  
Adel Barakat ◽  
Shimaa Alshhawy ◽  
Kuniaki Yoshitomi ◽  
Costas Sarris
Keyword(s):  
Electromagnetic Waves ◽  
Wireless Power Transfer ◽  
Split Ring Resonator ◽  
Input Power ◽  
Power Transfer ◽  
Wireless Power ◽  
Biomedical Implant ◽  
Safety Regulations ◽  
Wireless Power Transfer System ◽  
Tissue Characteristics

AbstractConventional resonant inductive coupling wireless power transfer (WPT) systems encounter performance degradation while energizing biomedical implants. This degradation results from the dielectric and conductive characteristics of the tissue, which cause increased radiation and conduction losses, respectively. Moreover, the proximity of a resonator to the high permittivity tissue causes a change in its operating frequency if misalignment occurs. In this report, we propose a metamaterial inspired geometry with near-zero permeability property to overcome these mentioned problems. This metamaterial inspired geometry is stacked split ring resonator metamaterial fed by a driving inductive loop and acts as a WPT transmitter for an in-tissue implanted WPT receiver. The presented demonstrations have confirmed that the proposed metamaterial inspired WPT system outperforms the conventional one. Also, the resonance frequency of the proposed metamaterial inspired TX is negligibly affected by the tissue characteristics, which is of great interest from the design and operation prospects. Furthermore, the proposed WPT system can be used with more than twice the input power of the conventional one while complying with the safety regulations of electromagnetic waves exposure.

scholarly journals Wireless Charger for Artificial Pacemaker

2021 ◽  
Author(s):  
Abinaya.B ◽  
Abirami.A.P ◽  
Divya.J ◽  
Rajalakshmi.R
Keyword(s):  
Output Voltage ◽  
Wireless Power Transfer ◽  
The Body ◽  
Rechargeable Battery ◽  
Medical Procedure ◽  
Power Transfer ◽  
Wireless Power ◽  
Inductive Power Transfer ◽  
Voltage Controller ◽  
Power Transfer Efficiency

The vast majority of the modernized implantable devices and Bio-sensors are set inside a patient’s body. To overcome this constraint, in this paper we have designed a rechargeable battery with wireless power transfer technique. The transdermal power transfer for the Pacemaker which is placed inside the heart should be possible by the concept of mutual inductance. The receiver loop ought to be situated inside the body and the transmitter curl ought to be situated outside of the body. The voltage controller will give or manage the necessary yield (output) voltage. The experiments were conducted on wireless charging through pork tissues reveal that from a 3.919-mw power source, 3.072-mw power can be received at 300kHz, reaching a high wireless power transfer efficiency of 78.4%, showing that the charging is very fast. We have also connected a Bluetooth Module to the Atmega328 microcontroller. This Bluetooth technology is used in the Android mobile application to notice the charging levels of the pacemaker. This Inductive power transfer technique takes out the danger of contamination which is brought about by the medical procedure.

Sign in / Sign up

Export Citation Format

Share Document