scholarly journals Failure Detection in Eucalyptus Plantation Based on UAV Images

Forests ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1250
Author(s):  
Huanxin Zhao ◽  
Yixiang Wang ◽  
Zhibin Sun ◽  
Qi Xu ◽  
Dan Liang
Keyword(s):  
Statistical Theory ◽  
Unmanned Aerial Vehicle ◽  
Failure Detection ◽  
Detection Rates ◽  
Eucalyptus Plantation ◽  
Direction Angle ◽  
Research Findings ◽  
Aerial Vehicle ◽  
Young Forests ◽  
Uav Images

The information of the locations and numbers of failures is crucial to precise management of new afforestation, especially during seedling replanting in young forests. In practice, foresters are more accustomed to determining the locations of failures according to their rows than based on their geographical coordinates. The relative locations of failures are more difficult to collect than the absolute geographic coordinates which are available from an orthoimage. This paper develops a novel methodology for obtaining the relative locations of failures in rows and counting the number of failures in each row. The methodology contains two parts: (1) the interpretation of the direction angle of seedlings rows on an unmanned aerial vehicle (UAV) orthoimage based on the probability statistical theory (called the grid-variance (GV) method); (2) the recognition of the centerline of each seedling rows using K-means and the approach to counting failures in each row based on the distribution of canopy pixels near the centerline of each seedling row (called the centerline (CL) method). The experimental results showed that the GV method can accurately interpret the direction angle of rows (45°) in an orthoimage and the CL method can quickly and accurately obtain the numbers and relative locations of failures in rows. The failure detection rates in the two experimental areas were 91.8% and 95%, respectively. These research findings can provide technical support for the precise cultivation of planted seedling forests.

scholarly journals Identifying the Branch of Kiwifruit Based on Unmanned Aerial Vehicle (UAV) Images Using Deep Learning Method

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4442
Author(s):  
Zijie Niu ◽  
Juntao Deng ◽  
Xu Zhang ◽  
Jun Zhang ◽  
Shijia Pan ◽  
...  
Keyword(s):  
Deep Learning ◽  
Unmanned Aerial Vehicle ◽  
Semantic Segmentation ◽  
Dynamic Monitoring ◽  
Support Vector ◽  
Distribution Maps ◽  
Time Operation ◽  
Aerial Vehicle ◽  
Uav Images ◽  
Segmentation Image

It is important to obtain accurate information about kiwifruit vines to monitoring their physiological states and undertake precise orchard operations. However, because vines are small and cling to trellises, and have branches laying on the ground, numerous challenges exist in the acquisition of accurate data for kiwifruit vines. In this paper, a kiwifruit canopy distribution prediction model is proposed on the basis of low-altitude unmanned aerial vehicle (UAV) images and deep learning techniques. First, the location of the kiwifruit plants and vine distribution are extracted from high-precision images collected by UAV. The canopy gradient distribution maps with different noise reduction and distribution effects are generated by modifying the threshold and sampling size using the resampling normalization method. The results showed that the accuracies of the vine segmentation using PSPnet, support vector machine, and random forest classification were 71.2%, 85.8%, and 75.26%, respectively. However, the segmentation image obtained using depth semantic segmentation had a higher signal-to-noise ratio and was closer to the real situation. The average intersection over union of the deep semantic segmentation was more than or equal to 80% in distribution maps, whereas, in traditional machine learning, the average intersection was between 20% and 60%. This indicates the proposed model can quickly extract the vine distribution and plant position, and is thus able to perform dynamic monitoring of orchards to provide real-time operation guidance.

Growing status observation for oil palm trees using Unmanned Aerial Vehicle (UAV) images

2021 ◽  
Vol 173 ◽  
pp. 95-121
Author(s):  
Juepeng Zheng ◽  
Haohuan Fu ◽  
Weijia Li ◽  
Wenzhao Wu ◽  
Le Yu ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Oil Palm ◽  
Palm Trees ◽  
Aerial Vehicle ◽  
Uav Images

scholarly journals Canopy Top, Height and Photosynthetic Pigment Estimation Using Parrot Sequoia Multispectral Imagery and the Unmanned Aerial Vehicle (UAV): Norway Spruce Forest Case Study

2021 ◽  
Author(s):  
Veronika Kopačková-Strnadová ◽  
Lucie Koucká ◽  
Jan Jelenek ◽  
Zuzana Lhotakova ◽  
Filip Oulehle
Keyword(s):  
Norway Spruce ◽  
Unmanned Aerial Vehicle ◽  
Linear Models ◽  
Photosynthetic Pigment ◽  
Ground Truth ◽  
Needle Age ◽  
Vegetation Indexes ◽  
Pigment Contents ◽  
Aerial Vehicle ◽  
Uav Images

Remote sensing is one of the modern methods that have significantly developed over the last two decades and nowadays provides a new means for forest monitoring. High spatial and temporal resolutions are demanded for accurate and timely monitoring of forests. In this study multi-spectral Unmanned Aerial Vehicle (UAV) images were used to estimate canopy parameters (definition of crown extent, top and height as well as photosynthetic pigment contents). The UAV images in Green, Red, Red-Edge and NIR bands were acquired by Parrot Sequoia camera over selected sites in two small catchments (Czech Republic) covered dominantly by Norway spruce monocultures. Individual tree extents, together with tree tops and heights, were derived from the Canopy Height Model (CHM). In addition, the following were tested i) to what extent can the linear relationship be established between selected vegetation indexes (NDVI and NDVIred edge) derived for individual trees and the corresponding ground truth (e.g., biochemically assessed needle photosynthetic pigment contents), and ii) whether needle age selection as a ground truth and crown light conditions affect the validity of linear models. The results of the conducted statistical analysis show that the two vegetation indexes (NDVI and NDVIred edge) tested here have a potential to assess photosynthetic pigments in Norway spruce forests at a semi-quantitative level, however the needle-age selection as a ground truth was revealed to be a very important factor. The only usable results were obtained for linear models when using the 2nd year needle pigment contents as a ground truth. On the other hand, the illumination conditions of the crown proved to have very little effect on the model’s validity. No study was found to directly compare these results conducted on coniferous forest stands. This shows that there is a further need for studies dealing with a quantitative estimation of the biochemical variables of nature coniferous forests when employing spectral data acquired by the UAV platform at a very high spatial resolution.

scholarly journals Rapid Mosaicking of Unmanned Aerial Vehicle (UAV) Images for Crop Growth Monitoring Using the SIFT Algorithm

2019 ◽  
Vol 11 (10) ◽  
pp. 1226 ◽  
Author(s):  
Jianqing Zhao ◽  
Xiaohu Zhang ◽  
Chenxi Gao ◽  
Xiaolei Qiu ◽  
Yongchao Tian ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Near Infrared ◽  
Similarity Index ◽  
Crop Growth ◽  
Contrast Threshold ◽  
Growth Monitoring ◽  
Scale Invariant ◽  
Sift Algorithm ◽  
Aerial Vehicle ◽  
Uav Images

To improve the efficiency and effectiveness of mosaicking unmanned aerial vehicle (UAV) images, we propose in this paper a rapid mosaicking method based on scale-invariant feature transform (SIFT) for mosaicking UAV images used for crop growth monitoring. The proposed method dynamically sets the appropriate contrast threshold in the difference of Gaussian (DOG) scale-space according to the contrast characteristics of UAV images used for crop growth monitoring. Therefore, this method adjusts and optimizes the number of matched feature point pairs in UAV images and increases the mosaicking efficiency. Meanwhile, based on the relative location relationship of UAV images used for crop growth monitoring, the random sample consensus (RANSAC) algorithm is integrated to eliminate the influence of mismatched point pairs in UAV images on mosaicking and to keep the accuracy and quality of mosaicking. Mosaicking experiments were conducted by setting three types of UAV images in crop growth monitoring: visible, near-infrared, and thermal infrared. The results indicate that compared to the standard SIFT algorithm and frequently used commercial mosaicking software, the method proposed here significantly improves the applicability, efficiency, and accuracy of mosaicking UAV images in crop growth monitoring. In comparison with image mosaicking based on the standard SIFT algorithm, the time efficiency of the proposed method is higher by 30%, and its structural similarity index of mosaicking accuracy is about 0.9. Meanwhile, the approach successfully mosaics low-resolution UAV images used for crop growth monitoring and improves the applicability of the SIFT algorithm, providing a technical reference for UAV application used for crop growth and phenotypic monitoring.

Unmanned aerial vehicle dynamic path planning in an uncertain environment

Robotica ◽  
2014 ◽  
Vol 33 (3) ◽  
pp. 611-621 ◽  
Author(s):  
Min Yao ◽  
Min Zhao
Keyword(s):  
Path Planning ◽  
Unmanned Aerial Vehicle ◽  
Optimal Path ◽  
Current Position ◽  
Direction Angle ◽  
Dynamic Path Planning ◽  
Aerial Vehicle ◽  
Dynamic Path ◽  
Rolling Optimization ◽  
Feedback Algorithm

SUMMARYAn unmanned aerial vehicle (UAV) dynamic path planning method is proposed to avoid not only static threats but also mobile threats. The path of a UAV is planned or modified by the potential trajectory of the mobile threat, which is predicted by its current position, velocity, and direction angle, because the positions of the UAV and mobile threat are dynamically changing. In each UAV planning path, the UAV incurs some costs, including control costs to change the direction angle, route costs to bypass the threats, and threat costs to acquire some probability to be destroyed by threats. The model predictive control (MPC) algorithm is used to determine the optimal or sub-optimal path with minimum overall costs. The MPC algorithm is a rolling-optimization feedback algorithm. It is used to plan the UAV path in several steps online instead of one-time offline to avoid sudden and mobile threats dynamically. Lastly, solution implementation is described along with several simulation results that demonstrate the effectiveness of the proposed method.

scholarly journals A Deep-Learning-Based Approach for Wheat Yellow Rust Disease Recognition from Unmanned Aerial Vehicle Images

Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6540
Author(s):  
Qian Pan ◽  
Maofang Gao ◽  
Pingbo Wu ◽  
Jingwen Yan ◽  
Shilei Li
Keyword(s):  
Deep Learning ◽  
Unmanned Aerial Vehicle ◽  
Recognition Accuracy ◽  
Yellow Rust ◽  
Semantic Segmentation ◽  
High Accuracy ◽  
Economic Losses ◽  
Support Vector ◽  
Aerial Vehicle ◽  
Uav Images

Yellow rust is a disease with a wide range that causes great damage to wheat. The traditional method of manually identifying wheat yellow rust is very inefficient. To improve this situation, this study proposed a deep-learning-based method for identifying wheat yellow rust from unmanned aerial vehicle (UAV) images. The method was based on the pyramid scene parsing network (PSPNet) semantic segmentation model to classify healthy wheat, yellow rust wheat, and bare soil in small-scale UAV images, and to investigate the spatial generalization of the model. In addition, it was proposed to use the high-accuracy classification results of traditional algorithms as weak samples for wheat yellow rust identification. The recognition accuracy of the PSPNet model in this study reached 98%. On this basis, this study used the trained semantic segmentation model to recognize another wheat field. The results showed that the method had certain generalization ability, and its accuracy reached 98%. In addition, the high-accuracy classification result of a support vector machine was used as a weak label by weak supervision, which better solved the labeling problem of large-size images, and the final recognition accuracy reached 94%. Therefore, the present study method facilitated timely control measures to reduce economic losses.

Sign in / Sign up

Export Citation Format

Share Document