scholarly journals Assessing the Effects of Accounting Methods for Carbon Storage in Harvested Wood Products on the National Carbon Budget of Lithuania

Forests ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 737 ◽  
Author(s):  
Marius Aleinikovas ◽  
Gediminas Jasinevičius ◽  
Mindaugas Škėma ◽  
Lina Beniušienė ◽  
Benas Šilinskas ◽  
...  
Keyword(s):  
Climate Change ◽  
Material Flow ◽  
Carbon Stock ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Wood Products ◽  
Carbon Accounting ◽  
Tier 2 ◽  
Tier 3 ◽  
Country Specific

Forests and the forest-based sector play important roles in mitigating climate change through carbon sequestration and storage in living biomass and soil. In Europe, the forest sector is the only sector that positively affects atmospheric carbon balance. After the forest harvest, a large share of carbon is removed together with the wood. This wood carbon might be stored for centuries if in the form of long-lived wood products. In 2011, the United Nations decided that countries should account for and report carbon balance not only in forests but also in harvested wood products (HWP), followed by very general guidelines on methods for carbon accounting in HWP. The Intergovernmental Panel on Climate Change (IPCC) proposed three methodological levels called tiers for estimating carbon stock and its changes in HWP. The first reporting period revealed that countries applied different carbon accounting methods (tiers), therefore comparing the carbon budgets of HWP and the effect of climate change mitigation among different countries is difficult. In order to test the differences between carbon accounting methods proposed by the IPCC guidelines, we applied two carbon accounting methods and used different data sources in the case of Lithuania. The methods applied were the IPCC Tier 2 method (data on HWP from statistics or the literature, default half-life values, and default HWP categories) and material flow analysis, which is compatible with the IPCC Tier 3 method (material flow data on HWP, country-specific half-life values, and country-specific HWP categories). Depending on the availability of historical data from different sources for the purpose of this study, three study periods were defined: 1992–2015 Food and Agriculture Organization Corporate Statistical Database (FAOSTAT) data, 1960–1991 data from the literature, and 1940–1991 data from national statistics. The study findings show that carbon stock in HWP significantly differed when different data sources and methods were applied. The highest carbon stock in HWP (19.5 Mt) at the end of the study period was observed when FAOSTAT data from 1992–2015 were used and the Tier 3 method was applied. The lowest carbon stock in HWP (11.2 Mt) at the end of the study period was observed when data from national statistics from 1940–1991 were used and the Tier 2 method was applied. The carbon inflow into the pool of HWP in all cases was estimated to be 40% higher when material flow analysis was applied compared to the IPCC default (Tier 2) method. These findings suggest that in general it is more reasonable to apply the Tier 3 method for carbon accounting of HWP in Lithuania.

scholarly journals Effects of Wood Product Utilization on Climate Change Mitigation in South Korea

2021 ◽  
Vol 13 (12) ◽  
pp. 6737
Author(s):  
Eun-Kyung Jang ◽  
Yeo-Chang Youn
Keyword(s):  
Climate Change ◽  
South Korea ◽  
Carbon Storage ◽  
Climate Change Mitigation ◽  
Wood Products ◽  
Carbon Accounting ◽  
Tier 2 ◽  
Harvested Wood Products ◽  
Tier 3 ◽  
Change Mitigation

Many countries, including South Korea, decided to suspend the inclusion of harvested wood products in their Nationally Determined Contributions, as part of the carbon inventory, in 2016. The inclusion of harvested wood products in the national greenhouse gases inventory must ensure the accuracy of carbon accounting and its conformity with the policy direction. The method used for harvested wood product carbon accounting can influence the accuracy of carbon account value, as well as policy direction based on greenhouse gas accounting. This research evaluated the utilization of domestic wood resources in South Korea in terms of carbon storage impacts from the perspective of the cascading use of wood products. The study also compared the two accounting methods (Tier 2 and Tier 3) of carbon storage for the period from 1970 to 2080, assuming the current pattern of wood resource utilization for the next sixty years. The results show that the current utilization of domestic wood resources is inefficient in terms of climate change mitigation. The analysis shows that there is a significant difference between the Tier 2 and Tier 3 methods in carbon storage effects, and the amount of harvested wood products carbon stock calculated by the Tier 2 method was found to be approximately double that of Tier 3. This result implies that there is a possibility of overestimating the carbon storage of harvested wood products when using the Tier 2 method in the case of net timber-importing countries, such as South Korea. The study can provide guidance for designing timber resource management from the perspective of the cascading use of wood products in order to contribute to sustainable development goals, including climate change mitigation.

scholarly journals MATERIAL FLOW ANALYSIS AND PLANT LAY-OUT OPTIMIZATION OF A MANUFACTURING SYSTEM

2014 ◽  
pp. 107-116
Author(s):  
Francesco Longo ◽  
Giovanni Mirabelli ◽  
Enrico Papoff
Keyword(s):  
Material Flow ◽  
Material Handling ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Wood Products ◽  
New Production ◽  
Accurate Analysis ◽  
Handling Cost ◽  
Material Handling Cost ◽  
Time Minimization

The paper proposes the results of a research project developed by the authors in collaboration with a production system working in the field of manufacturing wood products. The first step of the project was an accurate analysis of the system and the design of new production documents in order to collect data about the system itself. The collected data have been used to propose an initial solution of plant lay-out. The second step of the project was the construction of a simulation model. The model has been used to find an optimal plant- layout configuration by means of genetic algorithms with the goal of material handling cost and shop order flow time minimization.

scholarly journals Life Cycle Assessment and Material Flow Analysis: Two Under-Utilized Tools for Informing E-Waste Management

2021 ◽  
Vol 13 (14) ◽  
pp. 7939
Author(s):  
Sohani Vihanga Withanage ◽  
Komal Habib
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Material Flow ◽  
Keyword Search ◽  
Technological Development ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Civil Society Organizations ◽  
The Past ◽  
Depth Analysis

The unprecedented technological development and economic growth over the past two decades has resulted in streams of rapidly growing electronic waste (e-waste) around the world. As the potential source of secondary raw materials including precious and critical materials, e-waste has recently gained significant attention across the board, ranging from governments and industry, to academia and civil society organizations. This paper aims to provide a comprehensive review of the last decade of e-waste literature followed by an in-depth analysis of the application of material flow analysis (MFA) and life cycle assessment (LCA), i.e., two less commonly used strategic tools to guide the relevant stakeholders in efficient management of e-waste. Through a keyword search on two main online search databases, Scopus and Web of Science, 1835 peer-reviewed publications were selected and subjected to a bibliographic network analysis to identify and visualize major research themes across the selected literature. The selected 1835 studies were classified into ten different categories based on research area, such as environmental and human health impacts, recycling and recovery technologies, associated social aspects, etc. With this selected literature in mind, the review process revealed the two least explored research areas over the past decade: MFA and LCA with 33 and 31 studies, respectively. A further in-depth analysis was conducted for these two areas regarding their application to various systems with numerous scopes and different stages of e-waste life cycle. The study provides a detailed discussion regarding their applicability, and highlights challenges and opportunities for further research.

Dynamic material flow analysis of natural graphite in China for 2001-2018

2021 ◽  
Vol 173 ◽  
pp. 105732
Author(s):  
Xue Rui ◽  
Yong Geng ◽  
Xin Sun ◽  
Han Hao ◽  
Shijiang Xiao
Keyword(s):  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Natural Graphite

Dynamics of Regional Recycling Economy Development Based on Material Flow Analysis: A Case Study in Shandong Province

2011 ◽  
Vol 347-353 ◽  
pp. 2961-2966
Author(s):  
Dian Ming Geng ◽  
Jia Xiang Liu
Keyword(s):  
Water Supply ◽  
Circular Economy ◽  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Shandong Province ◽  
Utilization Efficiency ◽  
Recycling Economy ◽  
Material Input ◽  
Inputs And Outputs

In order to study the development of regional recycling economy, the material inputs and outputs of the eco-economic system in Shandong Province during the period from 1996 to 2009 were systematically analyzed by the material flow analysis(MFA). The results show that, (1)excluding water, material inputs and outputs rose persistently, but both were lower than the rate of GDP growth. (2)Water supply had a turning point in 2003, from 25.239 billion tons down to 21.934 billion tons, followed by the total annual water supply has been maintained at 220 million tons. At the same time the amount of wastewater emissions is increasing, especially domestic wastewater emissions had faster growth and that increased pressure on the regional water environment;(3) Steady increase in material input intensity, material output intensity presented a first increased and then decreased trend, that showed since Shandong Province proposed the strategic planning to develop circular economy, the development of regional circular economy have improved the material utilization efficiency and made a material reduction in output in the case of material input growth achieved. The rapid increase of material input and output efficiency further illustrated the efficiency of resource comprehensive utilization and waste output have been significantly improved.

Japanese 3R Policies Based on Material Flow Analysis

2008 ◽  
Vol 12 (5-6) ◽  
pp. 792-798 ◽  
Author(s):  
Hiroaki Takiguchi ◽  
Kazuhiko Takemoto
Keyword(s):  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis
Sign in / Sign up

Export Citation Format

Share Document