scholarly journals Development of Antibacterial and Antifouling Innovative and Eco-Sustainable Sol–Gel Based Materials: From Marine Areas Protection to Healthcare Applications

Gels ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 26
Author(s):  
Ileana Ielo ◽  
Fausta Giacobello ◽  
Angela Castellano ◽  
Silvia Sfameni ◽  
Giulia Rando ◽  
...  
Keyword(s):  
Bacterial Resistance ◽  
Bacterial Colonization ◽  
Sol Gel ◽  
Surface Finishing ◽  
Healthcare Applications ◽  
Economic Implications ◽  
Textile Materials ◽  
Antibacterial Performance ◽  
Physico Chemical ◽  
Marine Areas

Bacterial colonization of surfaces is the leading cause of deterioration and contaminations. Fouling and bacterial settlement led to damaged coatings, allowing microorganisms to fracture and reach the inner section. Therefore, effective treatment of surface damaged material is helpful to detach bio-settlement from the surface and prevent deterioration. Moreover, surface coatings can withdraw biofouling and bacterial colonization due to inherent biomaterial characteristics, such as superhydrophobicity, avoiding bacterial resistance. Fouling was a past problem, yet its untargeted toxicity led to critical environmental concerns, and its use became forbidden. As a response, research shifted focus approaching a biocompatible alternative such as exciting developments in antifouling and antibacterial solutions and assessing their antifouling and antibacterial performance and practical feasibility. This review introduces state-of-the-art antifouling and antibacterial materials and solutions for several applications. In particular, this paper focuses on antibacterial and antifouling agents for concrete and cultural heritage conservation, antifouling sol–gel-based coatings for filtration membrane technology, and marine protection and textile materials for biomedicine. In addition, this review discusses the innovative synthesis technologies of antibacterial and antifouling solutions and the consequent socio-economic implications. The synthesis and the related physico-chemical characteristics of each solution are discussed. In addition, several characterization techniques and different parameters that influence the surface finishing coatings deposition were also described.

Preparation, characterization, antibacterial properties and hydrophobic evaluation of SiO2/Ag nanosol coated cotton/linen fabric

2020 ◽  
Vol 111 (1) ◽  
pp. 75-83 ◽  
Author(s):  
Hongbin Li ◽  
Yan Zhuang ◽  
Hao Li ◽  
Karen Chávez Bracamontes ◽  
Dawei Wang ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Sol Gel ◽  
Antibacterial Properties ◽  
Air Permeability ◽  
Hydrophobic Property ◽  
Textile Materials ◽  
Antibacterial Performance ◽  
Ag Particles ◽  
Linen Fabric ◽  
Coated Cotton

Surface modification is an important element of textile manufacturing. The SiO2/Ag sol–gel was coated on the cotton/linen fabric by a simple two-dipping-two-rolling coating machine. SEM, Zeta-potential, (ATR)-FTIR and XRD, physical properties, water-droplet adsorption, antibacterial performance and water-resisting property have been adopted as the characterization techniques. The Zeta-potential showed that the nano-Ag particles affected the size of SiO2 nanoparticles. The results showed that antibacterial activity and hydrophobic property of cotton/linen fabric increased with the increasing concentration of the AgNO3. Air permeability was not decreased considerably, whereas tensile strength was increased significantly after coating twice. The SiO2/Ag coating cotton/linen fabric had an excellent antibacterial performance. Our results demonstrate that this SiO2/Ag coated cotton/linen fabric is a step towards better hydrophobic performance of textile materials.

scholarly journals Nanostructured Surface Finishing and Coatings: Functional Properties and Applications

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2733
Author(s):  
Ileana Ielo ◽  
Fausta Giacobello ◽  
Silvia Sfameni ◽  
Giulia Rando ◽  
Maurilio Galletta ◽  
...  
Keyword(s):  
Smart Materials ◽  
Sol Gel ◽  
Deposition Process ◽  
Industrial Applications ◽  
Surface Finishing ◽  
Temperature Phase ◽  
Stimuli Responsive ◽  
Antifouling Coatings ◽  
Physico Chemical

This review presents current literature on different nanocomposite coatings and surface finishing for textiles, and in particular this study has focused on smart materials, drug-delivery systems, industrial, antifouling and nano/ultrafiltration membrane coatings. Each of these nanostructured coatings shows interesting properties for different fields of application. In this review, particular attention is paid to the synthesis and the consequent physico-chemical characteristics of each coating and, therefore, to the different parameters that influence the substrate deposition process. Several techniques used in the characterization of these surface finishing coatings were also described. In this review the sol–gel method for preparing stimuli-responsive coatings as smart sensor materials is described; polymers and nanoparticles sensitive to pH, temperature, phase, light and biomolecules are also treated; nanomaterials based on phosphorus, borates, hydroxy carbonates and silicones are used and described as flame-retardant coatings; organic/inorganic hybrid sol–gel coatings for industrial applications are illustrated; carbon nanotubes, metallic oxides and polymers are employed for nano/ultrafiltration membranes and antifouling coatings. Research institutes and industries have collaborated in the advancement of nanotechnology by optimizing conversion processes of conventional materials into coatings with new functionalities for intelligent applications.

scholarly journals Nanostructured Surface Finishing and Coatings: Functional Properties and Applications

2021 ◽  
Author(s):  
Ileana Ielo ◽  
Fausta Giacobello ◽  
Silvia Sfameni ◽  
Giulia Rando ◽  
Maurilio Galletta ◽  
...  
Keyword(s):  
Smart Materials ◽  
Sol Gel ◽  
Deposition Process ◽  
Industrial Applications ◽  
Ultrafiltration Membrane ◽  
Surface Finishing ◽  
Temperature Phase ◽  
Stimuli Responsive ◽  
Antifouling Coatings ◽  
Physico Chemical

Abstract: This review presents current literature on different nanocomposites coatings and surface finishing for different substrates (such as textiles, concrete, plastics, stones, metals and so on). In particular, this study is focused on smart materials, drug delivery systems, and industrial, antifouling and nano/ultrafiltration membrane coatings. Each of these nanostructured coatings shows interesting properties for different fields of application. In this review, particular attention is paid to the synthesis and the consequent physico-chemical characteristics of each coating and, therefore, to the different parameters that influence the substrate deposition process. Several techniques used in the characterization of these surface finishing coatings are also described. In this review, the sol-gel and polymerization method for preparing stimuli-responsive coatings as smart sensor materials is described; functional polymers and nanoparticles sensitive to pH, temperature, phase, light and biomolecules are also treated. Finally, nanomaterials based on phosphorus, borates, hydroxy carbonates and silicones are used and described as flame retardant coatings; organic/inorganic hybrid sol-gel coatings for industrial applications are illustrated, together with functional nanofiller (carbon nanotubes, metallic oxides, etc.) and polymers employed for nano/ultrafiltration membrane and antifouling coatings. In the last decades, several research institutes and industries have collaborated for the advancement of nanotechnology by optimizing conversion processes of conventional materials into coatings with new functionalities for intelligent, innovative, eco-sustainable and advanced applications.

Surface finishing of enamels by sol-gel coating

2006 ◽  
Vol 41 (1) ◽  
pp. 99-102 ◽  
Author(s):  
Marta Krzyzak ◽  
Günther Heinz Frischat ◽  
Peter Hellmold
Keyword(s):  
Sol Gel ◽  
Surface Finishing

scholarly journals Synthesis of Nanogels: Current Trends and Future Outlook

Gels ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 36
Author(s):  
Emanuele Mauri ◽  
Sara Maria Giannitelli ◽  
Marcella Trombetta ◽  
Alberto Rainer
Keyword(s):  
3D Printing ◽  
Ad Hoc ◽  
Sol Gel ◽  
Controlled Polymerization ◽  
Current Trends ◽  
Chip Technology ◽  
Physico Chemical ◽  
Physical Interactions ◽  
Sol Gel Transition ◽  
Gel Transition

Nanogels represent an innovative platform for tunable drug release and targeted therapy in several biomedical applications, ranging from cancer to neurological disorders. The design of these nanocarriers is a pivotal topic investigated by the researchers over the years, with the aim to optimize the procedures and provide advanced nanomaterials. Chemical reactions, physical interactions and the developments of engineered devices are the three main areas explored to overcome the shortcomings of the traditional nanofabrication approaches. This review proposes a focus on the current techniques used in nanogel design, highlighting the upgrades in physico-chemical methodologies, microfluidics and 3D printing. Polymers and biomolecules can be combined to produce ad hoc nanonetworks according to the final curative aims, preserving the criteria of biocompatibility and biodegradability. Controlled polymerization, interfacial reactions, sol-gel transition, manipulation of the fluids at the nanoscale, lab-on-a-chip technology and 3D printing are the leading strategies to lean on in the next future and offer new solutions to the critical healthcare scenarios.

Preparation and Photocatalytic Activity of Mixed Phase Anatase/rutile TiO2 Nanoparticles for Phenol Degradation

2014 ◽  
Vol 70 (2) ◽  
Author(s):  
Mohamad Azuwa Mohamed ◽  
Wan Norharyati Wan Salleh ◽  
Juhana Jaafar ◽  
Norhaniza Yusof
Keyword(s):  
Photocatalytic Activity ◽  
Tio2 Nanoparticles ◽  
High Performance ◽  
Sol Gel ◽  
Phenol Degradation ◽  
Chemical Properties ◽  
Mixed Phase ◽  
Rutile Tio2 ◽  
Physico Chemical ◽  
Degussa P25

The evolution of desirable physico-chemical properties in high performance photocatalyst materials involves steps that must be carefully designed, controlled, and optimized. This study investigated the role of key parameter in the preparation and photocatalytic activity analysis of the mixed phase of anatase/rutile TiO2 nanoparticles, prepared via sol-gel method containing titanium-n-butoxide Ti(OBu)4 as a precursor material, nitric acid as catalyst, and isopropanol as solvent. The prepared TiO2 nanoparticles were characterized by means of XRD, SEM, and BET analyses, and UV-Vis-NIR spectroscopy. The results indicated that the calcination temperature play an important role in the physico-chemical properties and photocatalytic activity of the resulting TiO2 nanoparticles. Different calcination temperatures would result in different composition of anatase and rutile. The photocatalytic activity of the prepared mixed phase of anatase/rutile TiO2 nanoparticles was measured by photodegradation of 50 ppm phenol in an aqueous solution. The commercial anatase from Sigma-Aldrich and Degussa P25 were used for comparison purpose. The mixed phase of anatase/rutile TiO2 nanoparticles (consists of 38.3% anatase and 61.7% rutile) that was prepared at 400°C exhibited the highest photocatalytic activity of 84.88% degradation of phenol. The result was comparable with photocatalytic activity demonstrated by Degussa P25 by 1.54% difference in phenol degradation. The results also suggested that the mixed phase of anatase/rutile TiO2 nanoparticles is a promising candidate for the phenol degradation process. The high performance of photocatalyst materials may be obtained by adopting a judicious combination of anatase/rutile and optimized calcination conditions.

scholarly journals Use of modern methods of fibre surface modification to obtain the multifunctional properties of textile materials

2003 ◽  
Vol 57 (10) ◽  
pp. 491-499 ◽  
Author(s):  
Dragan Jocic ◽  
Petar Jovancic ◽  
Maja Radetic ◽  
Tatjana Topalovic ◽  
Zoran Petrovic
Keyword(s):  
Surface Modification ◽  
Surface Topography ◽  
Fibre Surface ◽  
Enzyme Treatment ◽  
Textile Fibre ◽  
Textile Materials ◽  
Chemical Surface ◽  
Angle Measurements ◽  
Physico Chemical ◽  
Physical And Chemical

The modern textile fibre treatments aim to obtain the required level of beneficial effect while attempting to confine the modification to the fibre surface. Recently, much attention has been focused on different physical methods of fibre surface modification, cold plasma treatment being considered as very useful. Moreover, there are efficient chemical methods available, such as peroxide, biopolymer and enzyme treatment. Some interesting combinations of these physical and chemical surface modification methods as means to modify fibre surface topography and thus controlling the surface-related properties of the fibre are presented in this paper. The properties obtained are discussed on the basis of the physico-chemical changes in the surface layer of the fibre, being assessed by wettability and contact angle measurements, as well as by FTIR-ATR and XPS analysis. The SEM and AFM technique are used to assess the changes in the fibre surface topography and to correlate these changes to the effectiveness, uniformity and severity of the textile fibre surface modification treatments.

scholarly journals In situ sol-gel synthesis of hyaluronan derivatives bio-nanocomposite hydrogels

2019 ◽  
Vol 6 (5) ◽  
pp. 249-258 ◽  
Author(s):  
U D’Amora ◽  
A Ronca ◽  
M G Raucci ◽  
S M Dozio ◽  
H Lin ◽  
...  
Keyword(s):  
Sol Gel ◽  
Chemical Properties ◽  
Filler Concentration ◽  
Similar Degree ◽  
Nanocomposite Hydrogels ◽  
Physico Chemical ◽  
Inorganic Fillers ◽  
Sol Gel Synthesis ◽  
Physical Blending

Abstract The main driving idea of the present study was the comparison between two different chemical modifications of hyaluronic acid (HA) followed by the development of nanocomposite hydrogels directly in situ by biomineralization of photocrosslinkable HA polymers through sol-gel synthesis. In this way, it has been possible to overcome some limitations due to classical approaches based on the physical blending of inorganic fillers into polymer matrix. To this aim, methacrylated and maleated HA, synthesized with similar degree of substitution (DS) were compared in terms of mechanical and physico-chemical properties. The success of in situ biomineralization was highlighted by reflect Fourier transform infrared spectroscopy and thermogravimetric analysis. Furthermore, mechanical characterization demonstrated the reinforcing effect of inorganic fillers evidencing a strong correlation with DS. The swelling behavior resulted to be correlated with filler concentration. Finally, the cytotoxicity tests revealed the absence of toxic components and an increase of cell proliferation over culture time was observed, highlighting these bio-nanocomposite hyaluronan derivatives as biocompatible hydrogel with tunable properties.

Sign in / Sign up

Export Citation Format

Share Document