scholarly journals The Application of 2,6-Bis(4-Methoxybenzoyl)-Diaminopyridine in Solvent Extraction and Polymer Membrane Separation for the Recovery of Au(III), Ag(I), Pd(II) and Pt(II) Ions from Aqueous Solutions

2021 ◽  
Vol 22 (17) ◽  
pp. 9123
Author(s):  
Daria Bożejewicz ◽  
Katarzyna Witt ◽  
Małgorzata A. Kaczorowska ◽  
Włodzimierz Urbaniak ◽  
Borys Ośmiałowski
Keyword(s):  
Solvent Extraction ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Noble Metal ◽  
Membrane Separation ◽  
Polymer Membranes ◽  
Silver Ions ◽  
Polymer Membrane ◽  
Separation Processes ◽  
The Stability

The work describes the results of the first application of 2,6-bis(4-methoxybenzoyl)-diaminopyridine (L) for the recovery of noble metal ions (Au(III), Ag(I), Pd(II), Pt(II)) from aqueous solutions using two different separation processes: dynamic (classic solvent extraction) and static (polymer membranes). The stability constants of the complexes formed by the L with noble metal ions were determined using the spectrophotometry method. The results of the performed experiments clearly show that 2,6-bis(4-methoxybenzoyl)-diaminopyridine is an excellent extractant, as the recovery was over 99% for all studied noble metal ions. The efficiency of 2,6-bis(4-methoxybenzoyl)-diaminopyridine as a carrier in polymer membranes after 24 h of sorption was lower; the percentage of metal ions removal from the solutions (%Rs) decreased in following order: Ag(I) (94.89%) > Au(III) (63.46%) > Pt(II) (38.99%) > Pd(II) (23.82%). The results of the desorption processes carried out showed that the highest percentage of recovery was observed for gold and silver ions (over 96%) after 48 h. The results presented in this study indicate the potential practical applicability of 2,6-bis(4-methoxybenzoyl)-diaminopyridine in the solvent extraction and polymer membrane separation of noble metal ions from aqueous solutions (e.g., obtained as a result of WEEE leaching or industrial wastewater).

scholarly journals Efficient Recovery of Noble Metal Ions (Pd2+, Ag+, Pt2+, and Au3+) from Aqueous Solutions Using N,N'-Bis(salicylidene)ethylenediamine (Salen) as an Extractant (Classic Solvent Extraction) and Carrier (Polymer Membranes)

Membranes ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 863
Author(s):  
Katarzyna Witt ◽  
Małgorzata A. Kaczorowska ◽  
Daria Bożejewicz ◽  
Włodzimierz Urbaniak
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Noble Metal ◽  
High Resolution Mass Spectrometry ◽  
Polymer Membranes ◽  
Single Component ◽  
Molar Ratio ◽  
Efficient Recovery ◽  
The Stability ◽  
Precious Metal Ions

This paper presents the results of the first application of N,N'-bis(salicylidene)ethylenediamine (salen) as an extractant in classical liquid–liquid extraction and as a carrier in membrane processes designed for the recovery of noble metal ions (Pd2+, Ag+, Pt2+, and Au3+) from aqueous solutions. In the case of the utilization of membranes, both sorption and desorption were investigated. Salen has not been used so far in the sorption processes of precious metal ions. Recovery experiments were performed on single-component solutions (containing only one type of metal ions) and polymetallic solutions (containing ions of all four metals). The stability constants of the obtained complexes were determined spectrophotometrically. In contrast, electrospray ionization high-resolution mass spectrometry (ESI-HRMS) was applied to examine the elemental composition and charge of the generated complexes of chosen noble metal ions and salen molecules. The results show the great potential of N,N'-bis(salicylidene)ethylenediamine as both an extractant and a carrier. In the case of single-component solutions, the extraction percentage was over 99% for all noble metal ions (molar ratio M:L of 1:1), and in the case of a polymetallic solution, it was the lowest, but over 94% for platinum ions and the highest value (over 99%) for gold ions. The percentages of sorption (%Rs) of metal ions from single-component solutions using polymer membranes containing N,N'-bis(salicylidene)ethylenediamine as a carrier were highest after 24 h of the process (93.23% for silver(I) ions, 74.99% for gold(III) ions, 69.11% and 66.13% for palladium(II) and platinum(II) ions, respectively), similar to the values obtained for the membrane process conducted in multi-metal solutions (92.96%, 84.26%, 80.94%, and 48.36% for Pd(II), Au(III), Ag(I), and Pt(II) ions, respectively). The percentage of desorption (%Rdes) was very high for single-component solutions (the highest, i.e., 99%, for palladium solution and the lowest, i.e., 88%, for silver solution), while for polymetallic solutions, these values were slightly lower (for Pt(II), it was the lowest at 63.25%).

scholarly journals 2,6-Bis((benzoyl-R)amino)pyridine (R = H, 4-Me, and 4-NMe2) Derivatives for the Removal of Cu(II), Ni(II), Co(II), and Zn(II) Ions from Aqueous Solutions in Classic Solvent Extraction and a Membrane Extraction

Membranes ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 233
Author(s):  
Daria Bożejewicz ◽  
Borys Ośmiałowski ◽  
Małgorzata Anna Kaczorowska ◽  
Katarzyna Witt
Keyword(s):  
Mass Spectrometry ◽  
Solvent Extraction ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
High Resolution Mass Spectrometry ◽  
Membrane Extraction ◽  
Resonance Spectroscopy ◽  
Recovery Processes ◽  
The Stability ◽  
Derivatives Of

In this paper, the application of new substituted 2,6-bis((benzoyl-R)amino)pyridine (R = H, 4-Me, and 4-NMe2) derivatives for the recovery of copper(II), nickel(II), cobalt(II), and zinc(II) ions from aqueous solutions was described. The structures of the synthesized compounds were confirmed by nuclear magnetic resonance spectroscopy (NMR), electrospray ionization high-resolution mass spectrometry (ESI HRMS), and tandem mass spectrometry methods (HCD MS/MS). Three different derivatives of 2,6-bis((benzoyl-R)amino)pyridine were used as carriers in membrane processes and as extractants in classic solvent extraction. In each case, the single derivative recovery was carried out on a model solution that contained only one type of metal ions. Spectrophotometry studies were performed to determine the stability constants of the complexes formed by the synthesized species with analyzed metals ions. The results obtained indicate that the synthesized compounds form stable complexes with Cu(II), Ni(II), Co(II), and Zn(II) ions and can be used in both types of studied recovery processes. However, the effectiveness of the synthesized compounds in the recovery of metal ions depends both on the structure of compounds and properties of metals as well as on their concentration.

Ionic liquids as selective extractants and ion carriers of heavy metal ions from aqueous solutions utilized in extraction and membrane separation

2015 ◽  
Vol 31 (2) ◽  
Author(s):  
Beata Pospiech ◽  
Wojciech Kujawski
Keyword(s):  
Ionic Liquids ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Metal Ion ◽  
Membrane Separation ◽  
Research Area ◽  
Separation Processes ◽  
Removal Of Heavy Metals ◽  
Heavy Metals Ions

AbstractThis paper analyzes the applications of various ionic liquids (ILs) as metal ion carriers and extractants utilized for the separation of metal cations from aqueous solutions. Subsequently, an up-to-date review of the use of ILs in polymer inclusion membranes is presented. ILs represent a promising group of extractants and ion carriers of metal ions in extraction and membrane separation processes. The removal of heavy metals ions from aqueous solutions using ILs indicates an extensive and promising research area. It is expected that the role of ILs will gradually increase as the worldwide implementation of separation methods in recovery of metal ions from various aqueous solutions is growing quickly.

The method of appearing solvent: Extraction of metal ions from aqueous solutions into in situ forming ionic liquid

2016 ◽  
Vol 469 (2) ◽  
pp. 238-240 ◽  
Author(s):  
S. V. Smirnova ◽  
T. O. Samarina ◽  
D. V. Il’in ◽  
I. V. Pletnev ◽  
Yu. A. Zolotov
Keyword(s):  
Ionic Liquid ◽  
Solvent Extraction ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
In Situ Forming

scholarly journals N,N’-Bis(salicylidene)ethylenediamine (Salen) as an Active Compound for the Recovery of Ni(II), Cu(II), and Zn(II) Ions from Aqueous Solutions

Membranes ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 60
Author(s):  
Katarzyna Witt ◽  
Daria Bożejewicz ◽  
Małgorzata A. Kaczorowska
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Active Compound ◽  
Metal Ion ◽  
High Resolution Mass Spectrometry ◽  
Separation Of Metal Ions ◽  
Ion Separation ◽  
Liquid Liquid Extraction ◽  
The Stability ◽  
Complexes With Metal Ions

In this paper, three main methods of metal ion separation, i.e., liquid–liquid extraction, transport across polymer inclusion membranes (PIMs), and sorption/desorption, are described. In all of them, N,N’-bis(salicylidene)ethylenediamine (salen) was used as an active compound, i.e., as an extractant or as a carrier for the recovery of Ni(II), Cu(II), or Zn(II) ions from aqueous solutions. In each case, the recovery was performed on a model solution, which contained only a single metal ion. The obtained results were compared with the author’s previous results for the separation of metal ions using β-diketones, since both β-diketones and salen form the so-called Werner-type complexes. Electrospray ionization high-resolution mass spectrometry (ESI-HRMS) was also applied to confirm the ability of the carrier to form complexes with metal ions in a solution. Moreover, spectrophotometry was used to determine the stability constant of the obtained complexes.

Sign in / Sign up

Export Citation Format

Share Document