scholarly journals Energy Efficiency for Social Buildings in Morocco, Comparative (2E) Study: Active VS. Passive Solutions Via TRNsys

Inventions ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 4
Author(s):  
Fatima Zohra Gargab ◽  
Amine Allouhi ◽  
Tarik Kousksou ◽  
Haytham El-Houari ◽  
Abdelmajid Jamil ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Savings ◽  
Building Envelope ◽  
Hot Water ◽  
Solar Water Heater ◽  
Water Heater ◽  
Climatic Zones ◽  
Solar Water ◽  
Water Heaters ◽  
Solar Water Heaters

This paper aims to highlight the potential of solar water heater installations in Morocco. The project involves the comparison of active and passive solutions for energy efficiency in buildings. To this end, a numerical simulation model of solar water heater installations is created under TRNsys. Three hot water demand scenarios (Low, Standard, and High) were taken into account for the six climatic zones defined in the Moroccan thermal regulation of constructions. The same software (TRNsys) is used to model a pilot building consisting of 16 flats. Energy efficiency actions have been applied to the building envelope (insulation and glazing) and simulations are made for the six areas. The simulation results comparing energy and financial savings show the influence of subsidized gas prices on solar water heaters’ relevance despite significant energy savings. This work proves that solar water heaters will be a primary obligation for Morocco, taking into account changes in butane gas prices.

scholarly journals Evaluation of a High-Performance Solar Home in Loveland, Colorado

2006 ◽  
Vol 129 (2) ◽  
pp. 226-234
Author(s):  
Robert Hendron ◽  
Mark Eastment ◽  
Ed Hancock ◽  
Greg Barker ◽  
Paul Reeves
Keyword(s):  
High Performance ◽  
Energy Savings ◽  
High Efficiency ◽  
Building Envelope ◽  
Operating Conditions ◽  
Hot Water ◽  
Space Heating ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water

Building America (BA) partner McStain Neighborhoods built the Discovery House in Loveland, CO, with an extensive package of energy-efficient features, including a high-performance envelope, efficient mechanical systems, a solar water heater integrated with the space-heating system, a heat-recovery ventilator (HRV), and ENERGY STAR appliances. The National Renewable Energy Laboratory (NREL) and Building Science Consortium conducted short-term field-testing and building energy simulations to evaluate the performance of the house. These evaluations are utilized by BA to improve future prototype designs and to identify critical research needs. The Discovery House building envelope and ducts were very tight under normal operating conditions. The HRV provided fresh air at a rate of about 35L∕s(75cfm), consistent with the recommendations of ASHRAE Standard 62.2. The solar hot water system is expected to meet the bulk of the domestic hot water (DHW) load (>83%), but only about 12% of the space-heating load. DOE-2.2 simulations predict whole-house source energy savings of 54% compared to the BA Benchmark (Hendron, R., 2005 NREL Report No. 37529, NREL, Golden, CO). The largest contributors to energy savings beyond McStain’s standard practice are the solar water heater, HRV, improved air distribution, high-efficiency boiler, and compact fluorescent lighting package.

scholarly journals Evaluation of a High-Performance Solar Home in Loveland, Colorado

Solar Energy ◽  
2005 ◽  
Author(s):  
Robert Hendron ◽  
Mark Eastment ◽  
Ed Hancock ◽  
Greg Barker ◽  
Paul Reeves
Keyword(s):  
High Performance ◽  
Energy Savings ◽  
High Efficiency ◽  
Building Envelope ◽  
Operating Conditions ◽  
Hot Water ◽  
Space Heating ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water

Building America (BA) partner McStain Neighborhoods built the Discovery House in Loveland, Colorado, with an extensive package of energy-efficient features, including a high-performance envelope, efficient mechanical systems, a solar water heater integrated with the space-heating system, a heat-recovery ventilator (HRV), and ENERGY STAR™ appliances. The National Renewable Energy Laboratory (NREL) and Building Science Consortium (BSC) conducted short-term field-testing and building energy simulations to evaluate the performance of the house. These evaluations are utilized by BA to improve future prototype designs and to identify critical research needs. The Discovery House building envelope and ducts were very tight under normal operating conditions. The HRV provided fresh air at a rate of about 75 cfm (35 l/s), consistent with the recommendations of ASHRAE Standard 62.2. The solar hot water system is expected to meet the bulk of the domestic hot water (DHW) load (>83%), but only about 12% of the space-heating load. DOE-2.2 simulations predict whole-house source energy savings of 54% compared to the BA Benchmark [1]. The largest contributors to energy savings beyond McStain’s standard practice are the solar water heater, HRV, improved air distribution, high-efficiency boiler, and compact fluorescent lighting package.

scholarly journals Assessment and Modeling of Household-Scale Solar Water Heater Application in Zambia: Technical, Environmental, and Energy Analysis

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Mehdi Jahangiri ◽  
Esther T. Akinlabi ◽  
Sam M. Sichilalu
Keyword(s):  
Fossil Fuels ◽  
Hot Water ◽  
Climate Data ◽  
Ghg Emission ◽  
Water Heater ◽  
Ghg Mitigation ◽  
Solar Water ◽  
Water Heaters ◽  
Industrial Sectors ◽  
Solar Water Heaters

Solar water heaters (SWHs) are one of the most effective plans for general and easy use of solar energy to supply hot water in domestic and industrial sectors. This paper gives the first-ever attempts to assess the optimal localization of SWHs across 22 major cities in Zambia, as well as determine the possibility of hot water generation and model the greenhouse gas (GHG) emission saving. The climate data used is extracted by using the MeteoSyn software which is modeled in TSOL™. Results show the high potential of GHG emission reduction due to nonconsumption of fossil fuels owing to the deployment of SWHs, and three cities Kabwe, Chipata, and Mbala had the highest GHG mitigation by 1552.97 kg/y, 1394.8 kg/y, and 1321.39 kg/y, respectively. On average, SWHs provide 62.47% of space heating and 96.05% of the sanitary hot water requirement of consumers. The findings have shown the potential for the deployment of SWHs in Zambia. The techno-enviro study in this paper can be used by the policymakers of Zambia and countries with similar climates.

Thermal Properties Study of a Solar Water Heater Tank with a Mantle Exchanger

2014 ◽  
Vol 3 (1) ◽  
pp. 92-100 ◽  
Author(s):  
Mourad Chikhi ◽  
Rabah Sellami ◽  
Nachida Kasbadji Merzouk
Keyword(s):  
Heat Exchanger ◽  
Renewable Energy Sources ◽  
Supply And Demand ◽  
Research Work ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Incentive Programs ◽  
Water Heaters ◽  
Solar Water Heaters

The development and use of renewable energy sources and technologies are becoming vital for the management of energy supply and demand. For development solar water heaters, the incentive programs are supported by the Algerian government to generalize the using of this kind of energy especially in Sahara. This study is a part of program to develop a new solar water heater in UDES (Algeria). In this research work, the thermal performance of a solar water heater with a mantle heat exchanger is investigated numerically using Comsol Multyphysics software. The objective is to investigate the influence of the mantle heat exchanger thickness on the performance of solar water heaters. The results show, for 160 liters capacity of the solar water heaters tank, the 13mm of the heat exchanger thickness leads to improve the efficiency of the solar water heater.

scholarly journals Thermal efficiency and cost analysis of solar water heater made in Rwanda

2018 ◽  
Vol 37 (3) ◽  
pp. 1147-1161 ◽  
Author(s):  
Esdras Nshimyumuremyi ◽  
Wang Junqi
Keyword(s):  
Cost Analysis ◽  
Thermal Efficiency ◽  
Solar Water Heater ◽  
Water Heating ◽  
Water Heater ◽  
Solar Water Heating ◽  
Solar Water ◽  
Water Heaters ◽  
Solar Water Heaters ◽  
Made In

Solar water heating is a technology of capturing the energy from the sun's radiation for the purpose of raising the temperature of water from water supply temperature to the desired higher temperature depending on the use. There are many views and discussions on the questions of thermal efficiency of solar water heaters and their associated cost, especially different customers/users want to replace their existing conventional water heating energy by solar water heating systems. In this present paper, a deep investigation has been accomplished to determine thermal efficiency and cost analysis of solar water heater made in Rwanda. During manufacturing of solar water heater, the collector was the main part to emphasize on. The high efficiency of the system was achieved by replacing galvanized iron sheet by aluminum sheet slotted and black painted as an absorber plate. The ambient temperature and average solar radiation of the three sites where solar water heaters are installed were investigated. The used materials, specifications and sizing were discussed in this paper.

Characteristic Heat Removal Efficiency for Thermosyphon Solar Water Heaters During the System Application Phase

2004 ◽  
Vol 126 (3) ◽  
pp. 950-956 ◽  
Author(s):  
J. M. Chang
Keyword(s):  
Removal Efficiency ◽  
Empirical Model ◽  
System Application ◽  
Heat Removal ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Water Heaters ◽  
Heat Removal Efficiency ◽  
Solar Water Heaters

The overall performance rating of a thermosyphon solar water heater should take into consideration its heat removal efficiency during the system application phase. This study employs a precise on-line operation to first identify physical heat removal patterns of a thermosyphon solar water heater, and then develops an empirical model for deriving its characteristic heat removal efficiency. This empirical model is in the form of a logarithmic curve, and has a high data correlation coefficient of 0.889 to 0.967. Based upon the empirical model, this study defines a characteristic heat removal efficiency parameter for thermosyphon solar water heaters. Finally, this study establishes a storage tank design method which enables the characteristic heat removal efficiency of the complete system to be optimized.

scholarly journals Performance Modeling Comparison of a Solar Combisystem and Solar Water Heater

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
John L. Sustar ◽  
Jay Burch ◽  
Moncef Krarti
Keyword(s):  
Energy Savings ◽  
Residential Building ◽  
System Size ◽  
Energy Performance ◽  
Hot Water ◽  
Space Heating ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Heating Loads

As homes move toward zero energy performance, some designers are drawn toward the solar combisystem due to its ability to increase the energy savings as compared to solar water heater (SWH) systems. However, it is not trivial as to the extent of incremental savings these systems will yield as compared to SWH systems, since the savings are highly dependent on system size and the domestic hot water (DHW) and space heating loads of the residential building. In this paper, the performance of a small combisystem and SWH, as a function of location, size, and load, is investigated using annual simulations. For benchmark thermal loads, the percent increased savings from a combisystem relative to a SWH can be as high as 8% for a 6 m2 system and 27% for a 9 m2 system in locations with a relatively high solar availability during the heating load season. These incremental savings increase significantly in scenarios with higher space heating loads and low DHW loads.

Evacuated Tube Solar Collectors Integrated With Phase Change Materials and Silicone Oil

2017 ◽  
Author(s):  
Alexios Papadimitratos ◽  
Sarvenaz Sobhansarbandi ◽  
Vladimir Pozdin ◽  
Anvar Zakhidov ◽  
Fatemeh Hassanipour
Keyword(s):  
Phase Change ◽  
Solar Collector ◽  
Phase Change Materials ◽  
Silicone Oil ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Water Heaters ◽  
Evacuated Tubes ◽  
Solar Water Heaters

This paper presents a novel method of integrating Phase Change Materials (PCMs) and Silicone oil within the Evacuated solar Tube Collectors (ETCs) for application in Solar Water Heaters (SWHs). In this method, heat pipe is immersed inside the phase change material, where heat is effectively accumulated and stored for an extended period of time due to thermal insulation of evacuated tubes. The proposed solar collector utilizes two distinct phase change materials (dual-PCM), namely Tritriacontane paraffin and Erythritol, with melting temperature 72°C and 118°C respectively. The integration of Silicone oil for uniform melting of the PCMs, utilizes the convective heat transfer inside the evacuated tubes, as this liquid polymerized material is well known for its temperature-stability and an excellent heat transfer medium. The operation of solar water heater with the proposed solar collector is investigated during both normal and stagnation (on-demand) operation. The feasibility of this technology is tested via small scale and large scale commercial solar water heaters. Beyond the improved functionality for solar water heater systems, the results from this study show show efficiency improvement of 26% for the normal operation and 66% for the stagnation mode compared with standard solar water heaters that lack phase change materials and silicone oil. The benefit of this method includes improved functionality by delayed release of heat, thus providing hot water during the hours of high demand or when solar intensity is insufficient such in a cloudy day and during night time.

An analysis of the economic viability and greenhouse gas emissions reductions resulting from the use of solar water heaters in a typical Brazilian dwelling

2018 ◽  
Vol 4 (2) ◽  
pp. 1-10
Author(s):  
Leandra Altoé ◽  
Delly Oliveira Filho ◽  
Joyce Correna Carlo ◽  
Paulo Marcos Barros Monteiro ◽  
Isabella Theresa Almeida Martins
Keyword(s):  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Economic Viability ◽  
Solar Water Heater ◽  
Water Heater ◽  
Emissions Reductions ◽  
Gas Emissions ◽  
Solar Water ◽  
Water Heaters ◽  
Solar Water Heaters

Several countries have reduced their energy consumption and greenhouse gas emissions levels in buildings by promulgating laws, formulating standards and instituting certification programs. In this context, Brazil launched an energy efficiency certification for buildings in 2009. This study aimed to analyze the economic viability and potential greenhouse gas emissions reductions associated with the use of solar water heaters in a typical Brazilian dwelling. Solar thermal systems were simulated at different energy efficiency levels and shower water flow rates. It was found that the use of solar water heater, as compared with electric heater without a hot water storage, presented internal return rate of approximately 26% per year, simple payback around 4.5 years; net present value about US$ 2,194.00 and cost of conserved energy around US$ 0.12 kWh-1. This study also verified that solar water heater use in a typical Brazilian dwelling reduced emissions compared with electric and gas heating by approximately 95 and 256 kgCO2equivalentyear-1, respectively. The total reduction potential of greenhouse gas emissions by use solar water heaters for the Brazilian residential sector was substantial, around 5.75 million tCO2equivalentyear-1.

Experimental Study on the Heat Exchanger Performance of Parabolic Trough Solar Water Heater

2014 ◽  
Vol 1008-1009 ◽  
pp. 58-62
Author(s):  
Bin Yang ◽  
Wei Wang ◽  
De Gong Zuo
Keyword(s):  
Solar Water Heater ◽  
Parabolic Trough ◽  
Water Heater ◽  
Average Efficiency ◽  
Solar Water ◽  
Daily Average ◽  
Water Heaters ◽  
Solar Energy Flux ◽  
Energy Flux Density ◽  
Solar Water Heaters

This paper introduces a new type of solar water heater——Parabolic trough solar water heater,the biggest feature of the solar water heater is that the parabolic trough reflector can reflect light onto the tube with reflective principles,which may lead to lots of advantages,such as more strong solar energy flux density,fewer losses,fewer tubes used.In a word,the cost is reduced while the performance is guaranteed.On this basis,we built a collector area of about 1.54 square meters of parabolic trough solar water heaters bench and made experiments to test.Instantaneous average efficiency and daily average efficiency of the water heater can be calculated.Efficiency curve can also be generated.Meanwhile we measured the heat loss coefficient of the water heater.The results showed that the daily average efficiency of the parabolic trough concentrating solar collector is between 30% and 50%,while at higher temperatures the collector showed its good insulation properties.

Sign in / Sign up

Export Citation Format

Share Document