scholarly journals Development and Evaluation of an Injectable Chitosan/β-Glycerophosphate Paste as a Local Antibiotic Delivery System for Trauma Care

2018 ◽  
Vol 9 (4) ◽  
pp. 56 ◽  
Author(s):  
Logan Boles ◽  
Christopher Alexander ◽  
Leslie Pace ◽  
Warren Haggard ◽  
Joel Bumgardner ◽  
...  
Keyword(s):  
Delivery System ◽  
Infection Prevention ◽  
Wound Site ◽  
Ejection Force ◽  
Relative Viability ◽  
Further Development ◽  
Local Antibiotic ◽  
Antibiotic Delivery

Complex open musculoskeletal wounds are a leading cause of morbidity worldwide, partially due to a high risk of bacterial contamination. Local delivery systems may be used as adjunctive therapies to prevent infection, but they may be nondegradable, possess inadequate wound coverage, or migrate from the wound site. To address this issue, a thermo-responsive, injectable chitosan paste was fabricated by incorporating beta-glycerophosphate. The efficacy of thermo-paste as an adjunctive infection prevention tool was evaluated in terms of cytocompatibility, degradation, antibacterial, injectability, and inflammation properties. In vitro studies demonstrated thermo-paste may be loaded with amikacin and vancomycin and release inhibitory levels for at least 3 days. Further, approximately 60% of thermo-paste was enzymatically degraded within 7 days in vitro. The viability of cells exposed to thermo-paste exceeded ISO 10993-5 standards with approximately 73% relative viability of a control chitosan sponge. The ejection force of thermo-paste, approximately 20 N, was lower than previously studied paste formulations and within relevant clinical ejection force ranges. An in vivo murine biocompatibility study demonstrated that thermo-paste induced minimal inflammation after implantation for 7 days, similar to previously developed chitosan pastes. Results from these preliminary preclinical studies indicate that thermo-paste shows promise for further development as an antibiotic delivery system for infection prevention.

scholarly journals Characterization and Antibiofilm Activity of Mannitol–Chitosan-Blended Paste for Local Antibiotic Delivery System

Marine Drugs ◽  
2019 ◽  
Vol 17 (9) ◽  
pp. 517 ◽  
Author(s):  
Leslie R. Pace ◽  
Zoe L. Harrison ◽  
Madison N. Brown ◽  
Warren O. Haggard ◽  
J. Amber Jennings
Keyword(s):  
Infection Prevention ◽  
Bacterial Biofilm ◽  
Antibiofilm Activity ◽  
Persister Cells ◽  
In Vivo Evaluation ◽  
Musculoskeletal Infection ◽  
Prevention And Treatment ◽  
Local Antibiotic ◽  
Antibiotic Delivery

Mannitol, a polyalcohol bacterial metabolite, has been shown to activate dormant persister cells within bacterial biofilm. This study sought to evaluate an injectable blend of mannitol, chitosan, and polyethylene glycol for delivery of antibiotics and mannitol for eradication of Staphylococcal biofilm. Mannitol blends were injectable and had decreased dissociation and degradation in the enzyme lysozyme compared to blends without mannitol. Vancomycin and amikacin eluted in a burst response, with active concentrations extended to seven days compared to five days for blends without mannitol. Mannitol eluted from the paste in a burst the first day and continued through Day 4. Eluates from the mannitol pastes with and without antibiotics decreased viability of established S. aureus biofilm by up to 95.5% compared to blends without mannitol, which only decreased biofilm when loaded with antibiotics. Cytocompatibility tests indicated no adverse effects on viability of fibroblasts. In vivo evaluation of inflammatory response revealed mannitol blends scored within the 2–4 range at Week 1 (2.6 ± 1.1) and at Week 4 (3.0 ± 0.8), indicative of moderate inflammation and comparable to non-mannitol pastes (p = 0.065). Clinically, this paste could be loaded with clinician-selected antibiotics and used as an adjunctive therapy for musculoskeletal infection prevention and treatment.

scholarly journals Design and Antileishmanial Activity of Amphotericin B-Loaded Stable Ionic Amphiphile Biovector Formulations

2002 ◽  
Vol 46 (5) ◽  
pp. 1597-1601 ◽  
Author(s):  
P. M. Loiseau ◽  
L. Imbertie ◽  
C. Bories ◽  
D. Betbeder ◽  
I. De Miguel
Keyword(s):  
Amphotericin B ◽  
Delivery System ◽  
Leishmania Donovani ◽  
Phosphatidyl Glycerol ◽  
In Vivo Efficacy ◽  
Anionic Lipids ◽  
Further Development ◽  
Polysaccharide Matrix

ABSTRACT A new delivery system, Ionic Amphiphilic Biovector (ABV), comprised of anionic lipids (dipalmitoyl phosphatidyl glycerol) included in a cationic cross-linked polysaccharide matrix was used as a reservoir for amphotericin B (AmB). Two ABV formulations exhibited an in vitro and in vivo efficacy similar to commercial AmBisome against Leishmania donovani-infected mice. The higher stability of these ABV formulations indicates their potential for further development and applications.

A Novel Intravaginal Delivery System for Itraconazole: In Vitro and In Vivo Evaluation

2009 ◽  
Vol 6 (2) ◽  
pp. 151-158 ◽  
Author(s):  
N. Dobaria ◽  
R. Mashru ◽  
A. Badhan ◽  
A. Thakkar
Keyword(s):  
Delivery System ◽  
In Vivo Evaluation ◽  
Intravaginal Delivery

scholarly journals Evaluation of a bone filler scaffold for local antibiotic delivery to prevent Staphylococcus aureus infection in a contaminated bone defect

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Karen E. Beenken ◽  
Mara J. Campbell ◽  
Aura M. Ramirez ◽  
Karrar Alghazali ◽  
Christopher M. Walker ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Bone Defect ◽  
Rabbit Model ◽  
In Vivo Studies ◽  
Bovine Bone ◽  
Bone Filler ◽  
Antibiotic Release ◽  
Local Antibiotic ◽  
Antibiotic Delivery

AbstractWe previously reported the development of an osteogenic bone filler scaffold consisting of degradable polyurethane, hydroxyapatite, and decellularized bovine bone particles. The current study was aimed at evaluating the use of this scaffold as a means of local antibiotic delivery to prevent infection in a bone defect contaminated with Staphylococcus aureus. We evaluated two scaffold formulations with the same component ratios but differing overall porosity and surface area. Studies with vancomycin, daptomycin, and gentamicin confirmed that antibiotic uptake was concentration dependent and that increased porosity correlated with increased uptake and prolonged antibiotic release. We also demonstrate that vancomycin can be passively loaded into either formulation in sufficient concentration to prevent infection in a rabbit model of a contaminated segmental bone defect. Moreover, even in those few cases in which complete eradication was not achieved, the number of viable bacteria in the bone was significantly reduced by treatment and there was no radiographic evidence of osteomyelitis. Radiographs and microcomputed tomography (µCT) analysis from the in vivo studies also suggested that the addition of vancomycin did not have any significant effect on the scaffold itself. These results demonstrate the potential utility of our bone regeneration scaffold for local antibiotic delivery to prevent infection in contaminated bone defects.

Heparin-mediated antibiotic delivery from an electrochemically-aligned collagen sheet

2021 ◽  
pp. 1-12
Author(s):  
Olivia T. Cheng ◽  
Andrew P. Stein ◽  
Eric Babajanian ◽  
Kathryn R. Hoppe ◽  
Shawn Li ◽  
...  
Keyword(s):  
High Performance ◽  
Inhibitory Concentration ◽  
Medical Implants ◽  
Implantable Medical Devices ◽  
Antibiotic Solution ◽  
Inhibition Zones ◽  
Antibiotic Release ◽  
Local Antibiotic ◽  
Antibiotic Delivery

BACKGROUND: Implantable medical devices and hardware are prolific in medicine, but hardware associated infections remain a major issue. OBJECTIVE: To develop and evaluate a novel, biologic antimicrobial coating for medical implants. METHODS: Electrochemically compacted collagen sheets with and without crosslinked heparin were synthesized per protocol developed by our group. Sheets were incubated in antibiotic solution (gentamicin or moxifloxacin) overnight, and in vitro activity was assessed with five-day diffusion assays against Pseudomonas aeruginosa. Antibiotic release overtime from gentamicin infused sheets was determined using in vitro elution and high performance liquid chromatography (HPLC). RESULTS: Collagen-heparin-antibiotic sheets demonstrated larger growth inhibition zones against P. aeruginosa compared to collagen-antibiotic alone sheets. This activity persisted for five days and was not impacted by rinsing sheets prior to evaluation. Rinsed collagen-antibiotic sheets did not show any inhibition zones. Elution of gentamicin from collagen-heparin-gentamicin sheets was slow and remained above the minimal inhibitory concentration for gentamicin sensitive organisms for 29 days. Conversely, collagen-gentamicin sheets eluted their antibiotic payload within 24 hours. Overall, heparin associated sheets demonstrated larger inhibition zones against P. aeruginosa and prolonged elution profile via HPLC. CONCLUSION: We developed a novel, local antibiotic delivery system that could be used to coat medical implants/hardware in the future and reduce post-operative infections.

scholarly journals Development of Triamcinolone Acetonide-Loaded Microemulsion as a Prospective Ophthalmic Delivery System for Treatment of Uveitis: In Vitro and In Vivo Evaluation

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 444
Author(s):  
Alaa Mahran ◽  
Sayed Ismail ◽  
Ayat A. Allam
Keyword(s):  
Triamcinolone Acetonide ◽  
Delivery System ◽  
Histopathological Examination ◽  
Rabbit Model ◽  
Subconjunctival Injection ◽  
In Vivo Evaluation ◽  
Ternary Phase Diagrams ◽  
Ophthalmic Delivery

Treatment of uveitis (i.e., inflammation of the uvea) is challenging due to lack of convenient ophthalmic dosage forms. This work is aimed to determine the efficiency of triamcinolone acetonide (TA)-loaded microemulsion as an ophthalmic delivery system for the treatment of uveitis. Water titration method was used to construct different pseudo-ternary phase diagrams. Twelve microemulsion formulations were prepared using oleic acid, Cremophor EL, and propylene glycol. Among all tested formulations, Formulation F3, composed of oil: surfactant-co-surfactant (1:1): water (15:35:50% w/w, respectively), was found to be stable and showed acceptable pH, viscosity, conductivity, droplet size (211 ± 1.4 nm), and zeta potential (−25 ± 1.7 mV) and almost complete in vitro drug release within 24 h. The in vivo performance of the optimized formulation was evaluated in experimentally uveitis-induced rabbit model and compared with a commercial TA suspension (i.e., Kenacort®-A) either topically or by subconjunctival injection. Ocular inflammation was evaluated by clinical examination, white blood cell count, protein content measurement, and histopathological examination. The developed TA-loaded microemulsion showed superior therapeutic efficiency in the treatment of uveitis with high patient compliance compared to commercial suspension. Hence, it could be considered as a potential ocular treatment option in controlling of uveitis.

Sign in / Sign up

Export Citation Format

Share Document