scholarly journals A Multiaxis Tool Path Generation Approach for Thin Wall Structures Made with WAAM

2021 ◽  
Vol 5 (4) ◽  
pp. 128
Author(s):  
Matthieu Rauch ◽  
Jean-Yves Hascoet ◽  
Vincent Querard
Keyword(s):  
Additive Manufacturing ◽  
High Performance ◽  
Tool Path ◽  
Tool Path Generation ◽  
Path Generation ◽  
Thin Wall ◽  
Process Data ◽  
Technical Data ◽  
Wall Structures ◽  
Wire Arc Additive Manufacturing

Wire Arc Additive Manufacturing (WAAM) has emerged over the last decade and is dedicated to the realization of high-dimensional parts in various metallic materials. The usual process implementation consists in associating a high-performance welding generator as heat source, a NC controlled 6 or 8 degrees (for example) of freedom robotic arm as motion system and welding wire as feedstock. WAAM toolpath generation methods, although process specific, can be based on similar approaches developed for other processes, such as machining, to integrate the process data into a consistent technical data environment. This paper proposes a generic multiaxis tool path generation approach for thin wall structures made with WAAM. At first, the current technological and scientific challenges associated to CAD/CAM/CNC data chains for WAAM applications are introduced. The focus is on process planning aspects such as non-planar non-parallel slicing approaches and part orientation into the working space, and these are integrated in the proposed method. The interest of variable torch orientation control for complex shapes is proposed, and then, a new intersection crossing tool path method based on Design For Additive Manufacturing considerations is detailed. Eventually, two industrial use cases are introduced to highlight the interest of this approach for realizing large components.

Minimax Optimization Strategy for Process Parameters Planning: Toward Interference-Free Between Tool and Flexible Workpiece in Milling Process

2016 ◽  
Vol 139 (5) ◽  
Author(s):  
Xiao-Ming Zhang ◽  
Dong Zhang ◽  
Le Cao ◽  
Tao Huang ◽  
Jürgen Leopold ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Process Parameters ◽  
Tool Path ◽  
Milling Process ◽  
Tool Path Generation ◽  
Path Generation ◽  
Thin Wall ◽  
Minimax Optimization ◽  
Envelope Surface ◽  
Flexible Workpiece

In milling of flexible workpieces, like axial-flow compressor impellers with thin-wall blades and deep channels, interference occurrence between workpiece and tool shaft is a great adverse issue. Even though interference avoidance plays a mandatory role in tool path generation stage, the generated tool path remains just a nominally interference-free one. This challenge is attributed to the fact that workpiece flexibility and dynamic response cannot be considered in tool path generation stage. This paper presents a strategy in process parameters planning stage, aiming to avoid the interference between tool shaft and flexible workpiece with dynamic response in milling process. The interference problem is formulated as that to evaluate the approaching extent of two surfaces, i.e., the vibrating workpiece and the swept envelope surface generated by the tool undergoing spatial motions. A metric is defined to evaluate quantitatively the approaching extent. Then, a minimax optimization model is developed, in which the optimization objective is to maximize the metric, so as the interference-free can be guaranteed while constraints require the milling process to be stable and process parameters to fall into preferred intervals in which material removal rate is satisfactory. Finish milling of impeller using a conical cutter governed by a nominally interference-free tool path is numerically simulated to illustrate the dynamics responses of the spatially distributed nodal points on the thin-wall blade and approaching extent of the time-varying vibrating blades to the tool swept envelope surface. Furthermore, the present model results suggest to use an optimal process parameters set in finish milling, as a result improving machining efficiency in addition to ensuring the interference-free requirement. The model results are verified against milling experiments.

scholarly journals A tool-path generation strategy for wire and arc additive manufacturing

2014 ◽  
Vol 73 (1-4) ◽  
pp. 173-183 ◽  
Author(s):  
Donghong Ding ◽  
Zengxi Pan ◽  
Dominic Cuiuri ◽  
Huijun Li
Keyword(s):  
Additive Manufacturing ◽  
Tool Path ◽  
Tool Path Generation ◽  
Path Generation

scholarly journals Low-Roughness-Surface Additive Manufacturing of Metal-Wire Feeding with Small Power

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4265
Author(s):  
Bobo Li ◽  
Bowen Wang ◽  
Greg Zhu ◽  
Lijuan Zhang ◽  
Bingheng Lu
Keyword(s):  
Additive Manufacturing ◽  
High Surface ◽  
Deposition Process ◽  
High Energy ◽  
Width Ratio ◽  
Thin Wall ◽  
Small Power ◽  
High Surface Quality ◽  
Wall Structures ◽  
Wire Feed

Aiming at handling the contradiction between power constraint of on-orbit manufacturing and the high energy input requirement of metal additive manufacturing (AM), this paper presents an AM process based on small-power metal fine wire feed, which produces thin-wall structures of height-to-width ratio up to 40 with core-forming power only about 50 W. In this process, thermal resistance was introduced to optimize the gradient parameters which greatly reduces the step effect of the typical AM process, succeeded in the surface roughness (Ra) less than 5 μm, comparable with that obtained by selective laser melting (SLM). After a 10 min electrolyte-plasma process, the roughness of the fabricated specimen was further reduced to 0.4 μm, without defects such as pores and cracks observed. The ultimate tensile strength of the specimens measured about 500 MPa, the relative density was 99.37, and the Vickers hardness was homogeneous. The results show that the proposed laser-Joule wire feed-direct metal deposition process (LJWF-DMD) is a very attractive solution for metal AM of high surface quality parts, particularly suitable for rapid prototyping for on-orbit AM in space.

Tool Path Optimization of 2D Contour Considering Stock Boundary

2012 ◽  
Vol 251 ◽  
pp. 169-172
Author(s):  
Fu Zhong Wu
Keyword(s):  
Present Method ◽  
Tool Path ◽  
Three Dimensional ◽  
Boundary Curve ◽  
Tool Path Generation ◽  
Path Optimization ◽  
Path Generation ◽  
Offset Curves ◽  
Measuring Machine ◽  
Tool Diameter

Based on analyzing the existing algorithms, a novel tool path generation of 2D contour considering stock boundary is presented. Firstly the boundary points of stock are obtained by three-dimensional measuring machine. And the boundary curve is constructed by method of features identifying. The stock boundary is offset toward outside with tool diameter. An enclosed region is formed between the contour curves and the offset curves of stock boundary. The tool path is generated by form of parallel spiral by offsetting the stock boundary in the enclosed region. Finally the validity of present method is demonstrated by an example.

Sign in / Sign up

Export Citation Format

Share Document