scholarly journals Hibiscus Leachate Dye-Based Low-Cost and Flexible Dye-Sensitized Solar Cell Prepared by Screen Printing

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2748
Author(s):  
Congjun Cao ◽  
Tianning Yang ◽  
Guangxue Chen

Although the price of dye-sensitized solar cells is lower than other solar cells, they still contain some high-cost materials, such as transparent conductive substrates, dyes (ruthenium dyes, organic dyes, etc.), and platinum counter electrodes. To solve this problem, a dye-sensitized solar cell based on hibiscus leaching solution and carbon black–silver electrodes was prepared by screen printing. The prepared low-cost dye-sensitized solar cells were flexible. The open-circuit voltage (Voc) of the obtained dye-sensitized solar cell is 0.65 V, the current density (Jsc) is 90 μA/cm², and the fill factor (FF) is 0.241.

2015 ◽  
Vol 3 (45) ◽  
pp. 23028-23034 ◽  
Author(s):  
Ranran Zhou ◽  
Wenxi Guo ◽  
Ruomeng Yu ◽  
Caofeng Pan

We present a highly flexible dye-sensitized solar cell composed of TiO2 nanotube arrays (TNARs) as the photoanode and a transparent Pt network electrode as the counter electrode (CE).


2021 ◽  
Vol 1028 ◽  
pp. 151-156
Author(s):  
Ayunita Chintia Celline ◽  
Astria Yuliani Subagja ◽  
Sri Suryaningsih ◽  
Annisa Aprilia ◽  
Lusi Safriani

Dye-sensitized solar cells (DSSC) are solar cells that has a great potential to be applied as renewable energy conversion. The major advantages of DSSC are the ease of fabrication process and low cost of production. Despite of these advantages, the efficiency of DSSC for converting light into electricity is still low. It is due to charge recombination in DSSC which limits the photoanode performance. Numerous efforts has been carried out to increase the efficiency of DSSC, one of which is by adding reduced graphene oxide (rGO) to titanium oxide (TiO2) to obtain TiO2-rGO nanocomposite. In this study, the synthesis of TiO2-rGO nanocomposites was carried out with concentration of rGO are 0.6, 0.8, and 1.0 wt% to amount of TiO2. We have done some characterizations to confirm the result of synthesized TiO2-rGO. UV-Vis measurement shows the addition of rGO has widened the absorption up to 400 nm. The FT-IR spectrum confirms that the rGO peaks appears at wavelength of 1400, 1600, dan 1700 cm-1 which exhibited the vibration C-O, C=C, and C=O stretching from COOH groups, respectively. The highest efficiency of DSSC with photoanode TiO2-rGO nanocomposite is 0.09% which was obtained from 0.8 wt% of rGO.


2017 ◽  
Vol 46 (13) ◽  
pp. 4403-4411 ◽  
Author(s):  
Chenle Zhang ◽  
Libo Deng ◽  
Peixin Zhang ◽  
Xiangzhong Ren ◽  
Yongliang Li ◽  
...  

The performance of a dye-sensitized solar cell (DSSC) is strongly influenced by the catalytic performance of its counter electrode (CE) materials.


2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sule Erten-Ela

Metal-free organic sensitizer consisting of donor, electron conducting, and anchoring anhydride groups was engineered at molecular level and synthesized. Dye sensitized solar cells based on conjugated naphthalene dye were fabricated using nanoporous electrode. Photoelectrodes with a 7 μm thick nanoporous layer and a 5 μm thick light-scattering layer were used to fabricate dye sensitized solar cells. DSSCs were fabricated in a FTO/nc-TiO2/organic dye/I-/I3-/Pt/FTO device geometry. Dye sensitized solar cell was characterized by current density-voltage (J-V) measurement. All current-voltage (I-V) measurements were done under 100 mW/cm2light intensity and AM 1.5 conditions. The photovoltaic data revealed a short circuit photocurrent density of 1.86 mA/cm2, an open circuit voltage of 430 mV, and a fill factor of 0.63, corresponding to an overall conversion efficiency of 0.53%.


2018 ◽  
Vol 6 (42) ◽  
pp. 11444-11456 ◽  
Author(s):  
Jonnadula Venkata Suman Krishna ◽  
Narra Vamsi Krishna ◽  
Towhid H. Chowdhury ◽  
Suryaprakash Singh ◽  
Idriss Bedja ◽  
...  

We have designed and synthesised four novel porphyrin sensitizers for dye-sensitized solar cell applications and shown power conversion efficiency of 10.5%.


2018 ◽  
Vol 47 (34) ◽  
pp. 11942-11952 ◽  
Author(s):  
Kitty Y. Chen ◽  
Phil A. Schauer ◽  
Brian O. Patrick ◽  
Curtis P. Berlinguette

Two sets of structurally analogous Co(iii/ii)-based redox mediators were incorporated in the dye-sensitized solar cells and a linear correlation was demonstrated between redox potential and photovoltage.


2015 ◽  
Vol 3 (12) ◽  
pp. 6383-6391 ◽  
Author(s):  
Jia-De Peng ◽  
Chuan-Pei Lee ◽  
D. Velayutham ◽  
V. Suryanarayanan ◽  
Kuo-Chuan Ho

A quasi-solid state dye-sensitized solar cell with the photoanode film of mesoporous TiO2spheres exhibited an efficiency of 6.18% and unfailing stability for 1200 h at 50 °C.


2017 ◽  
Vol 41 (13) ◽  
pp. 5605-5612 ◽  
Author(s):  
Radhakrishnan Sivakumar ◽  
Rodrigo Recabarren ◽  
Sekar Ramkumar ◽  
Arumugam Manivel ◽  
Jans Alzate-Morales ◽  
...  

A new type of ruthenium sensitizers, S3 and S4, consisting of carbazole–diazafluorene based bipolar ancillary ligands have been synthesized and characterized for dye sensitized solar cells.


Sign in / Sign up

Export Citation Format

Share Document