scholarly journals Characteristic Features of Ultrafine-Grained Ti-45 wt.% Nb Alloy under High Cycle Fatigue

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5365
Author(s):  
Аikol M. Mairambekova ◽  
Anna Y. Eroshenko ◽  
Vladimir A. Oborin ◽  
Mikhail V. Bannikov ◽  
Valentina V. Chebodaeva ◽  
...  
Keyword(s):  
High Cycle Fatigue ◽  
Fatigue Testing ◽  
Fatigue Cracks ◽  
Temperature Fields ◽  
Coarse Grained ◽  
Recrystallization Annealing ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Ultrafine Grained ◽  
Very High

The paper presents the results of fatigue-testing ultrafine-grained and coarse-grained Ti-45 wt.% Nb alloy samples under very high cycle fatigue (gigacycle regime), with the stress ratio R = −1. The ultrafine-grained (UFG) structure in the investigated alloy was formed by the two-stage SPD method, which included multidirectional forging (abc–forging) and multipass rolling in grooved rollers, with further recrystallization annealing. The UFG structure of the Ti-45 wt.% Nb alloy samples increased the fatigue limit under the high-cycle fatigue conditions up to 1.5 times compared with that of the coarse-grained (CG) samples. The infrared thermography method was applied to investigate the evolution of temperature fields in the samples under cyclic loading. Based on numerical morphology analysis, the scale invariance (the Hurst exponent) and qualitative differences for UFG and CG structures were determined. The latter resulted from the initiation and propagation of fatigue cracks in both ultra-fine grained and coarse-grained alloy samples under very high-cycle fatigue loading.

Influence of Reinforcement Geometry on the Very High-Cycle Fatigue Behavior of Aluminium-Matrix-Composites

2015 ◽  
Vol 825-826 ◽  
pp. 150-157 ◽  
Author(s):  
Alexandra Müller ◽  
Anja Weidner ◽  
Horst Biermann
Keyword(s):  
High Cycle Fatigue ◽  
Fatigue Testing ◽  
Fatigue Behavior ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Loading Conditions ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Very High

During technical operation, high performance materials are partially exposed to high frequency cyclic loading conditions. Furthermore, the small strains in the very high cycle fatigue (VHCF)-regime lead to accumulative damage which causes crack initiation related to an appropriate local deformation leading to final fatal fracture. At the same time, quite high requirements with regard to high number of cycles without any damage are demanded for many applications. Fields of application of these light-weight, but expensive materials, are e.g. in the automobile industry (e.g. engine blocks, cylinder heads, brakes).The fatigue behavior of Al-matrix composites (Al-MMCs) reinforced by alumina particles (15 vol.% Al2O3) or short fibers (20 vol.% Saffil), respectively, was already intensively studied in the LCF and HCF range. The present study is focusing on investigations in the very high cycle fatigue regime at stress amplitudes up to 140 MPa to reach fatigue life of about 1010 cycles. All experiments were carried out using an ultrasonic fatigue testing device under symmetric loading conditions (R=-1). Fatigue tests were accompanied by in situ thermography measurements to record the temperature of the whole specimen and to find “hot spots” indicating changes in microstructure and therefore the initiation or growth of cracks. Moreover, the resonant frequency as well as the damage parameter were evaluated to determine the beginning of damage. For a better understanding of the damage mechanism (matrix decohesion, matrix failure or failure of reinforcement) all fractured surfaces were investigated by scanning electron microscopy. The combination of these methods contributes to a better understanding of the underlying mechanism of damage in aluminum-matrix-composites.

Very High Cycle Fatigue Testing under Spectrum Loading for Endurance Limit Structural Design

2020 ◽  
Vol 65 (1) ◽  
pp. 1-7
Author(s):  
David T. Rusk ◽  
Robert E. Taylor ◽  
Bruce A. Pregger ◽  
Luis J. Sanchez
Keyword(s):  
Fatigue Test ◽  
Test Data ◽  
High Cycle Fatigue ◽  
Fatigue Testing ◽  
Crack Nucleation ◽  
Peak Stress ◽  
Material Behavior ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Very High

A program has recently concluded that generated fatigue test data for the influence of a rotorcraft main rotor blade root bending spectrum (Helix) on the crack nucleation mechanisms in 7075-T651 aluminum. High-frequency tests were performed that generated spectrum fatigue failures out to nearly 109 cycles. Fractographic examination showed a distinct change in crack nucleation from slip initiated to inclusion-initiated cracking as the spectrum peak stress level was increased. Spectrum life predictions were made using three different baseline constant-amplitude S-N curves, one using a traditional rotorcraft original equipment manufacturer fitting methodology, one using the high-cycle fatigue (HCF) portion of a strainlife curve, and one that was fitted to S-N data with test lives out to 3×108 cycles. The spectrum life prediction using the S-N curve that properly modeled material behavior in the very high cycle fatigue regime provided a good correlation to the spectrum fatigue test data. Predictions using the other S-N curves were highly conservative.

scholarly journals Recent Advances in Very High Cycle Fatigue Behavior of Metals and Alloys—A Review

Metals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1200
Author(s):  
Ashutosh Sharma ◽  
Min Chul Oh ◽  
Byungmin Ahn
Keyword(s):  
Crack Initiation ◽  
High Cycle Fatigue ◽  
Fatigue Testing ◽  
Fatigue Behavior ◽  
Simulation Studies ◽  
Cycle Fatigue ◽  
Future Directions ◽  
Very High Cycle Fatigue ◽  
Ultrasonic Fatigue ◽  
Very High

We reviewed the research and developments in the field of fatigue failure, focusing on very-high cycle fatigue (VHCF) of metals, alloys, and steels. We also discussed ultrasonic fatigue testing, historical relevance, major testing principles, and equipment. The VHCF behavior of Al, Mg, Ni, Ti, and various types of steels were analyzed. Furthermore, we highlighted the major defects, crack initiation sites, fatigue models, and simulation studies to understand the crack development in VHCF regimes. Finally, we reviewed the details regarding various issues and challenges in the field of VHCF for engineering metals and identified future directions in this area.

Very high cycle fatigue testing of concrete using ultrasonic cycling

2017 ◽  
Vol 59 (5) ◽  
pp. 438-444 ◽  
Author(s):  
Ulrike Karr ◽  
Reinhard Schuller ◽  
Michael Fitzka ◽  
Andreas Denk ◽  
Alfred Strauss ◽  
...  
Keyword(s):  
High Cycle Fatigue ◽  
Fatigue Testing ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Very High

Very High Cycle Fatigue in Pulsed High Power Spallation Neutron Source

2014 ◽  
Vol 891-892 ◽  
pp. 536-541 ◽  
Author(s):  
Zhi Hong Xiong ◽  
Masatoshi Futakawa ◽  
Takashi Naoe ◽  
Katsuhiro Maekawa
Keyword(s):  
Strain Rate ◽  
High Cycle Fatigue ◽  
Fatigue Testing ◽  
Testing Machine ◽  
Air Cooling ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Neutron Spallation Source ◽  
Ultrasonic Fatigue ◽  
Very High

Very high cycle fatigue degradation of type 316L austenitic stainless steel, which is used as the structural material of neutron spallation sources under intensive neutron irradiation environment, is investigated by using an ultrasonic fatigue testing machine. The strain rate imposed on the structure of neutron spallation source is almost equivalent to that produced in the testing machine. The temperature on the surface was controlled by the air-cooling. The effect of strain rate on the fatigue strength is recognized to increase the fatigue limit.

scholarly journals Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4820
Author(s):  
Yongtao Hu ◽  
Yao Chen ◽  
Chao He ◽  
Yongjie Liu ◽  
Qingyuan Wang ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Slip Band ◽  
316L Stainless Steel ◽  
High Cycle Fatigue ◽  
Fatigue Behavior ◽  
Fatigue Cracks ◽  
Propagation Mechanism ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Very High

Effect of microstructure on the crack initiation and early propagation mechanism in the very high cycle fatigue (VHCF) regime was studied in 316L stainless steel (316L SS) by atomic force microscope (AFM) and electron back scattered diffraction (EBSD). The results show that small fatigue cracks initiate from the slip band near the grain boundaries (GBs) or the twin boundaries (TBs). Early crack propagation along or cross the slip band is strongly influenced by the local microstructure such as grain size, orientation, and boundary. Besides, the gathered slip bands (SBs) are presented side by side with the damage grains of the run-out specimen. Finally, it is found that dislocations can either pass through the TBs, or be arrested at the TBs.

Fatigue Designing of High Strength Steels Components Considering Aggressive Fuel Environment and Very High Cycle Fatigue Effects

2014 ◽  
Vol 783-786 ◽  
pp. 1845-1850
Author(s):  
Stephan Issler ◽  
Manfred Bacher-Hoechst ◽  
Steffen Schmid
Keyword(s):  
High Cycle Fatigue ◽  
Fuel Injection ◽  
Fatigue Testing ◽  
High Strength Steels ◽  
High Strength ◽  
Cycle Fatigue ◽  
Fatigue Reliability ◽  
Automotive Components ◽  
Very High Cycle Fatigue ◽  
Very High

Automotive components for injection systems are subjected to load spectra with up to 1E9 load cycles during the expected service life. However, fatigue testing with such a large number of cycles using original components is extremely time-consuming and expensive. A contribution for fatigue reliability assessment is available by the application of specimen testing and the transfer of the results to components including the verification by component spot tests.In this contribution very high cycle fatigue results in laboratory air and in ethanol fuel using notched specimens of high strength stainless steel are discussed. The influence of testing frequency was studied using ultrasonic and conventional test techniques. The validation and transfer of these accelerated testing results to components is one of the main challenges for a reliable fatigue designing.KeywordsVery High Cycle Fatigue (VHCF), automotive components, fuel injection, bio-fuels, corrosion fatigue, testing concepts, fatigue design concepts

Sign in / Sign up

Export Citation Format

Share Document