scholarly journals Analysis of Tensile Strength and Failure Mechanism Based on Parallel Homogenization Model for Recycled Concrete

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 145
Author(s):  
Yijiang Peng ◽  
Semaoui Zakaria ◽  
Yucheng Sun ◽  
Ying Chen ◽  
Lijuan Zhang
Keyword(s):  
Tensile Strength ◽  
Failure Mechanism ◽  
Strain Softening ◽  
Recycled Concrete ◽  
Damage Analysis ◽  
Softening Curve ◽  
Force Element ◽  
Homogenization Model ◽  
Concrete Materials ◽  
Element Method

In this paper, a parallel homogenization model for recycled concrete was proposed. A new type of finite element method, the base force element method, based on the complementary energy principle and the parallel homogenization model, is used to conduct meso-level damage research on recycled concrete. The stress–strain softening curve and failure mechanism of the recycled concrete under uniaxial compression load are analyzed using the nonlinear damage analysis program of the base force element method based on the parallel homogenization model. The tensile strength and destructive mechanisms of recycled concrete materials are studied using this parallel homogenization model. The calculation results are compared with the results of the experiments and meso-level random aggregate model analysis methods. The research results show that this parallel homogenization analysis method can be used to analyze the nonlinear damage analysis of recycled concrete materials. The tensile strength, stress–strain softening curve, and crack propagation process of recycled concrete materials can be obtained using the present method.

Research on softening curve of recycled concrete using base force element method in meso-level

2019 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yijiang Peng ◽  
Xiyun Chen ◽  
Liping Ying ◽  
Mahmoud M.A. Kamel
Keyword(s):  
Uniaxial Tension ◽  
Transition Zone ◽  
Level Structure ◽  
Interfacial Transition Zone ◽  
Recycled Concrete ◽  
Content Type ◽  
Meso Level ◽  
Softening Curve ◽  
Force Element ◽  
Element Method

Purpose Based on the base force element method, a two-dimensional random circle aggregate model with Monte Carlo principle is proposed to carry out research on softening curve in meso-level. Design/methodology/approach The meso-level structure of recycled concrete is considered as the five-phase materials composed of aggregate, old interfacial transition zone, old mortar, new interfacial transition zone and new mortar. A multi-polyline damage model is adopted to describe the nonlinear mechanical behavior of recycled concrete material. The destruction state of the element is determined by the first strength theory. The research studies on damage process of recycled concrete under the loading conditions of uniaxial tension were established using the base force element method. Findings The softening curves of recycled concrete are obtained, which are in good agreement with experiment results. Simulation results show that the macroscopic mechanical properties and failure mechanism can analyze more reasonably from mesoscopic structure. Besides that, it can be investigated from the numerical results of the size effect in recycled concrete through the mesoscopic heterogeneity. Furthermore, the form of aggregate distribution has influence on the crack path but little effect on the tensile strength of recycled concrete. Originality/value The results show that the base force element method has been successfully applied to the study of softening curve of recycled concrete under uniaxial tension.

scholarly journals Effect of River Indus Sand and Recycled Concrete Aggregates as Fine and Coarse Replacement on Properties of Concrete

2019 ◽  
Vol 9 (1) ◽  
pp. 3832-3835 ◽  
Author(s):  
A. R. Sandhu ◽  
M. T. Lakhiar ◽  
A. A. Jhatial ◽  
H. Karira ◽  
Q. B. Jamali
Keyword(s):  
Tensile Strength ◽  
Coarse Aggregate ◽  
Recycled Concrete ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Compressive Strength Of Concrete ◽  
River Indus ◽  
Concrete Materials

As the demand for concrete rises, the concrete materials demand increases. Aggregates occupy 75% of concrete. A vast amount of aggregates is utilized in concrete while aggregate natural resources are reducing. To overcome this problem, River Indus sand (RIS) and recycled concrete aggregate (RCA) were utilized as fine and coarse aggregate respectively. The aim of this experimental investigation is to evaluate the workability, and compressive and tensile strength of concrete utilizing RIS and RCA. Concrete samples of 1:2:4 proportions were cast, water cured for 7, 14, 21 and 28 days, and tested for compressive and tensile strength. The outcomes demonstrate that concrete possessed less workability when RIS and RCA were utilized. It was predicted that compressive strength of concrete would reduce up to 1.5% when 50% RIS and 50% RCA were utilized in concrete and 11.5% when natural aggregate was fully replaced by RIS and RCA, whereas the tensile strength decreased up to 1.60% when 50% by 12% respectively.

Shear strength of reinforced concrete beams with recycled aggregates

2019 ◽  
Vol 22 (8) ◽  
pp. 1938-1951 ◽  
Author(s):  
George Wardeh ◽  
Elhem Ghorbel
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Strain Softening ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Opening Displacement ◽  
Aggregate Concrete ◽  
Natural Aggregate ◽  
Hinge Model

This article presents an experimental program on the shear behavior of beams without transversal reinforcement manufactured with natural aggregate concrete and 100% recycled aggregate concrete. The beams were tested under four-point bending for a shear span-to-depth ratio ( a/ d) equal to 1.5 and 3.0. The mechanical properties of two mixes were characterized in terms of compressive strength, splitting tensile strength, and elastic modulus. Three-point bending tests were performed on plain pre-notched samples in order to determine the fracture properties by an inverse analysis of experimental force–crack mouth opening displacement curves using the analytical nonlinear hinge model and a power law strain-softening relationship. The strain-softening law is described by two parameters being, respectively, the power n and the critical crack opening displacement wc. The experimental results show that, for the same class of compressive strength, tensile strength, fracture energy, and the shear strength of recycled aggregate concrete are lower than natural aggregate concrete. The decrease in the fracture energy and the shear strength is consistent with the decrease in the splitting tensile strength of the recycled aggregate concrete mixes compared to the natural aggregate concrete. Critical shear crack theory was adopted to model the shear behavior of beams tested with a/ d = 3.0. For an accurate evaluation of the deformation capacity of tested beams, the nonlinear hinge model for recycled concrete members was extended to recycled concrete sections. For deep beams ( a/ d = 1.5), the strut-and-tie model was used. Finally, comparisons of prediction models to a wide range of experimental data are presented.

Five-phase sphere equivalent model of recycled concrete and numerical simulation based on the base force element method

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yijiang Peng ◽  
Zhenghao Wu ◽  
Liping Ying ◽  
Desi Yang
Keyword(s):  
Numerical Simulation ◽  
Transition Zone ◽  
Interfacial Layer ◽  
Interfacial Transition Zone ◽  
Recycled Concrete ◽  
Equivalent Model ◽  
Content Type ◽  
Proposed Model ◽  
Force Element ◽  
Element Method

Purpose This paper aims to propose the five-phase sphere equivalent model of recycled concrete, which can be used to deduce the theoretical formulas for the Poisson’s ratio and effective elastic modulus. Design/methodology/approach At a mesoscopic level, the equivalent model converts the interfacial layer, which consists of the new interfacial transition zone (ITZ), the old mortar and the old (ITZ), into a uniform equivalent medium. This paper deduces a strength expression for the interfacial transition zone at the microscopic level using the equivalent model and elastic theory. In addition, a new finite element method called the base force element method was used in this research. Findings Through numerical simulation, it was found that the mechanical property results from the five-phase sphere equivalent model were in good agreement with those of the random aggregate model. Furthermore, the proposed model agree on quite well with the available experimental data. Originality/value The equivalent model can eliminate the influence of the interfacial layer on the macroscopic mechanical properties, thereby improving the calculation accuracy and computational efficiency. The proposed model can also provide a suitable model for multi-scale calculations.

Effects of Recycled Aggregate Replacement Rate on Compression Mechanical Behavior of Concrete Based on Base Force Element Method

2021 ◽  
Vol 894 ◽  
pp. 121-126
Author(s):  
Li Ping Ying ◽  
Yi Jiang Peng
Keyword(s):  
Failure Process ◽  
Strain Curve ◽  
Simple Algorithm ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Test Results ◽  
Force Element ◽  
Element Method

A meso-analysis method which is derived from the base force element method (BFEM) was proposed for recycled aggregate concrete (RAC). A simple algorithm was used to generate the convex recycled concrete aggregate (RCA) model. Uniaxial compression numerical simulations were carried out on the numerical specimens with different replacement rates of RCA. The model predictions were in a good agreement with the test results. The proposed method is very promising. It can totally predict the full stress-strain curve of RAC, as well as the failure process and failure mode, including strain softening and strain localization.

Sign in / Sign up

Export Citation Format

Share Document