scholarly journals The Microstructure and Property of a Titanium-Carbon Steel Clad Plate Prepared Using Explosive Welding

Metals ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 129
Author(s):  
Hui Zhao
Keyword(s):  
Carbon Steel ◽  
Explosive Welding ◽  
Pure Titanium ◽  
Heat Treating ◽  
Polarization Measurement ◽  
Corrosion Properties ◽  
Interface Waves ◽  
Steel Material ◽  
Order Of Magnitude ◽  
Scanning Imaging

The microstructure and properties of pure titanium (Ti)-carbon steel clad plate prepared using explosive welding were characterized. The bonding of the welding interface was inspected using C-scanning imaging technique. The microstructure and composition of the clad were characterized with optical microscopy and scanning electron microscopy. Mechanical and corrosion properties of the clad plate were investigated using tensile test, shearing test, and potentiodynamic polarization measurement. The results show that the pure titanium and carbon steel plate are joined successfully without visible defects. The interface wave is uniform. SEM observation and EDS analyses show that some melt blocks distribute at the interface waves vortices. Hardness testes results show that after heat treating, the hardness values in the titanium layer of the clad plate are similar to the original titanium plate, whereas the values at carbon steel layer increase from the interface to 300 μm away. Tensile and shearing test results indicate that the mechanical properties of the clad meet the requirements of ASTM B898 standard. Corrosion test shows that the Ecorr of the clad plate is more positive, and icorr is 1 order of magnitude lower compared to carbon steel material, suggesting that the corrosion resistance of clad plate is better than that of carbon steel material. These results suggest that the clad plate has good bonding quality and properties to meet the processing requirement and can be safely applicable in the petrochemical field.

B&W IRON

Alloy Digest ◽  
1968 ◽  
Vol 17 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Magnetic Permeability ◽  
Electric Motor ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Magnetic Characteristics ◽  
Low Carbon ◽  
High Magnetic Permeability

Abstract B and W IRON is a thoroughly killed, low carbon steel having a combination of ductility, toughness and high magnetic permeability. It is recommended for applications where good magnetic characteristics are of primary significance, such as in the manufacture of electric motor and generator housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-35. Producer or source: Babcock & Wilcox Company.

SAE 1025

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Plain Carbon Steel ◽  
General Purpose ◽  
Pressure Vessels ◽  
Permanent Mold ◽  
Steel Mills ◽  
Cold Worked ◽  
Permanent Mold Castings

Abstract SAE 1025 is a plain carbon steel for general-purpose construction and engineering. It is used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition. It also is carburized and used for case-hardened parts. Its many uses include bolts, forgings, axles, machinery components, cold-extruded parts, pressure vessels, case-hardened parts, chain and sprocket assemblies, spinning tools and permanent-mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-114. Producer or source: Carbon steel mills.

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

AISI 1566

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
High Carbon ◽  
Hand Tools ◽  
Steel Mills ◽  
Wide Range ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1566 is a high-carbon (nominally 0.66% carbon) steel containing 0.85-0.15% manganese. Its hardenability is low and on austenitizing and liquid quenching it develops a hard (martensitic) surface with a soft, ductile core. It can be used in the hot-rolled, annealed, normalized, cold-worked or liquid-quenched-and-tempered condition for a wide range of applications. It has good machinability and good workability. Its many uses include springs, shafts, hand tools, railway parts and agricultural machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-100. Producer or source: Carbon steel mills.

AISI 1141

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Carbon Steel ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
Light Duty ◽  
High Production ◽  
Ball Joints ◽  
Machining Characteristics

Abstract AISI 1141 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to give it free-machining characteristics. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but tend to be low in the transverse direction. It is highly recommended for high-production automatic-machine products. Among its many uses are screws, bolts, ball joints, spindles and light-duty gears. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-93. Producer or source: Carbon steel mills.

ALGOMA AR225

Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  
Keyword(s):  
Carbon Steel ◽  
Chemical Analysis ◽  
Physical Properties ◽  
Carbon Content ◽  
Brinell Hardness ◽  
Low Cost ◽  
Heat Treating ◽  
Rolled Plate ◽  
High Carbon ◽  
High Carbon Content

Abstract Algoma AR225 is a carbon steel developed primarily to supply a low-cost material for high-abrasion applications. It is furnished in the form of as-rolled plate with a relatively high carbon content (0.35-0.45%). AR-225 is sold on the basis of chemical analysis only; the number 225 signifies the approximate Brinell hardness. On thicknesses one-half inch and over, this Brinell value may be lower than 225 because of higher finishing temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-138. Producer or source: Algoma Steel Corporation Ltd.

UNS G10600

Alloy Digest ◽  
1991 ◽  
Vol 40 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Carbon Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. G 10600 is a high-carbon steel of low hardenability. It may be used in the as-rolled, annealed, normalized or quenched and-tempered condition, depending on the desired properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-129. Producer or source: Carbon steel mills.

UNS G10210

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Manganese Content ◽  
Heat Treating ◽  
Carbon Steels ◽  
High Manganese ◽  
Steel Mills ◽  
Cold Worked ◽  
Good Workability ◽  
High Manganese Content

Abstract UNS G10210 is a carbon steel of relatively high manganese content which increases hardenability and hardness over that of carbon steels of lower manganese. It combines good machinability, good workability (hot or cold) and good weldability. It is used in the annealed, hot-worked, normalized, cold-worked or water-quenched-and-tempered condition for many applications. It may be used in uncarburized applications and for components case-hardened by carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-122. Producer or source: Carbon steel mills.

AISI 1015

Alloy Digest ◽  
1972 ◽  
Vol 21 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Low Carbon ◽  
Steel Mills ◽  
Cold Worked ◽  
Hot Rolled ◽  
Good Workability

Abstract AISI 1015 is a low-carbon steel used in the annealed, cold-worked, hot-rolled or normalized condition for general purpose construction and engineering. It is also used for case-hardened components. It combines good machinability, good workability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-48. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document