scholarly journals Leaching Kinetics of Rare Earth Elements from Fire Clay Seam Coal

Minerals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 491
Author(s):  
Xinbo Yang ◽  
Rick Q. Honaker

Recovery of rare earth elements (REEs) from coal samples collected from the Fire Clay coal seam using diluted mineral acid solutions was investigated. The initial processing step was coal recovery using conventional froth flotation which concentrated the REEs in tailing material resulting in an upgrade to values around 700 ppm on a dry whole mass basis. Leaching experiments were performed on the flotation tailings material using a 1.2 M sulfuric acid solution adjusted to a temperature of 75 °C to study the extractability of REEs from coal material. The effect of particle size, leaching time, leaching temperature, and solid concentration on REE leaching recovery were evaluated. The kinetic data obtained from leaching over a range of temperatures suggested that the leaching process follows the shrinking core model with possibly a mixed control mechanism that may be a result of several heterogenous materials leaching simultaneously. Leaching recovery increased rapidly at the beginning of the reaction then slowed as the system reached equilibrium. The apparent activation energy determined from test data obtained over a range of temperatures using 1 M sulfuric acid was 36 kJ/mol for the first 20 min of reaction time and 27 kJ/mol for the leaching period between 20 and 120 min. The leaching of light REEs during the initial stage was determined to be driven by a chemical reaction, followed by the formation of a product layer, which required lower activation energy in the later stage of leaching. In regards to the heavy REEs, the major mechanism for leaching is desorption and the product layer formation does not affect the heavy REEs significantly.

2019 ◽  
Vol 142 ◽  
pp. 105888 ◽  
Author(s):  
George Blankson Abaka-Wood ◽  
Massimiliano Zanin ◽  
Jonas Addai-Mensah ◽  
William Skinner

Minerals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 262 ◽  
Author(s):  
Xiaosheng Yang ◽  
Hannu Tapani Makkonen ◽  
Lassi Pakkanen

Rare earth elements (REEs) are defined as lanthanides with Y and Sc. Rare earth occurrences including the REE-bearing phases and their distributions, measured by rare earth oxides (REOs), in the streams of processing a phosphate ore were determined by using MLA, the mineral liberation analysis and EPMA, the electron probe microanalysis. The process includes an apatite ore beneficiation by flotation and further processing of the beneficiation concentrate with sulfuric acid. Twenty-six, sixty-two and twelve percent of the total REOs (TREO) contents from the ore end up in the products of beneficiation tailings, phosphogypsum (PG) and phosphoric acid, respectively. Apatite, allanite, monazite and pyrochlore are identified as REE-bearing minerals in the beneficiation process. In the beneficiation tailings, the REEs are mainly distributed in monazite (10.3% TREO), apatite (5.9% TREO), allanite (5.4% TREO) and pyrochlore (4.3% TREO). Gypsum, monazite, apatite and other REE-bearing phases were found to host REEs in the PG and the REEs distributions are 44.9% TREO in gypsum, 15.8% TREO in monazite, 0.6% TREO in apatite and 0.6% TREO in other REE-bearing phases. Perspectives on the efficient recovery of REEs from the beneficiation tailings and the PG are discussed.


2015 ◽  
Vol 53 (1) ◽  
pp. 46-52
Author(s):  
Chul-Joo Kim ◽  
Ho-Sung Yoon ◽  
Kyung Woo Chung ◽  
Jin-Young Lee ◽  
Sung-Don Kim ◽  
...  

2020 ◽  
Vol 11 (4) ◽  
pp. 804
Author(s):  
Iga Trisnawati ◽  
Gyan Prameswara ◽  
Panut Mulyono ◽  
Agus Prasetya ◽  
Himawan Tri Bayu Murti Petrus

2021 ◽  
Vol 59 (7) ◽  
pp. 459-468
Author(s):  
Gee Hun Lee ◽  
Chang Kwon Kim ◽  
Dong Hoon Lee ◽  
Young Jun Song

This study was carried out to obtain data to design a process to recover rare earth elements, specifically Y(Yttrium), La(Lanthanum), Ce(Cerium), Eu(Europium), Tb(Terbium) from waste phosphor powder. For this purpose, we investigated the effect of temperature, concentration, time and acids on leaching of the rare earth elements. The effect of roasting temperature, roasting time, roasting agent and its dosage on the leaching of rare earth elements were also investigated. 92% of the Yttrium, 70% of the Europium and 8% of the Cerium contained in the waste phosphor powder was leached at the condition of 50 oC and 0.3N HCl solution for 3hours. However, Terbium and Lanthanum were never leached at this condition. The leaching ratio increased to 100% of Yttrium and Europium, 98% of Cerium, 92% of Terbium and 89% of Lanthanum by leaching after soda ash roasting. In the leaching experiment with unroasted phosphor at 80 oC, the initial leaching reaction rate of Yttrium was 0.035 mol/L·s in 0.3N sulfuric acid solution, 0.033 mol/L·s in nitric acid solution and 0.028 mol/L·s in 0.3N hydrochloric acid solution. And the initial leaching reaction rate of Europium was 0.0017 mol/L·s in 0.3N sulfuric acid solution, 0.00114 mol/L·s in nitric acid solution and 0.00113 mol/L·s in 0.3N hydrochloric acid solution. For Cerium, the initial leaching reaction rate was 0.00019 mol/L·s in 0.3N sulfuric acid solution, 0.00025 mol/L·s in nitric acid solution and 0.00014 mol/L·s in 0.3N hydrochloric acid solution.


2017 ◽  
Author(s):  
James C. Hower ◽  
◽  
Cortland Eble ◽  
John G. Groppo ◽  
Rick Q. Honaker

2019 ◽  
Vol 132 ◽  
pp. 491-496 ◽  
Author(s):  
Paul J. Antonick ◽  
Zhichao Hu ◽  
Yoshiko Fujita ◽  
David W. Reed ◽  
Gaurav Das ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document