scholarly journals Stereodivergent Synthesis of Camphor-Derived Diamines and Their Application as Thiourea Organocatalysts

Molecules ◽  
2020 ◽  
Vol 25 (13) ◽  
pp. 2978
Author(s):  
Sebastijan Ričko ◽  
Franc Požgan ◽  
Bogdan Štefane ◽  
Jurij Svete ◽  
Amalija Golobič ◽  
...  

A series of 18 regio- and stereo-chemically diverse chiral non-racemic 1,2-, 1,3-, and 1,4-diamines have been synthesized from commercial (1S)-(+)-ketopinic acid and (1S)-(+)-10-camphorsulfonic acid. The structures of the diamines are all based on the d-(+)-camphor scaffold and feature isomeric diversity in terms of regioisomeric attachment of the primary and the tertiary amine function and the exo/endo-isomerism. Diamines were transformed into the corresponding noncovalent bifunctional thiourea organocatalysts, which have been evaluated for catalytic activity in the conjugative addition of 1,3-dicarbonyl nucleophiles (dimethyl malonate, acetylacetone, and dibenzoylmethane) to trans-β-nitrostyrene. The highest enantioselectivity was achieved in the reaction with acetylacetone as nucleophile using endo-1,3-diamine derived catalyst 52 (91.5:8.5 er). All new organocatalysts 48–63 have been fully characterized. The structures and the absolute configurations of eight intermediates and thiourea derivative 52 were also determined by X-ray diffraction.

RSC Advances ◽  
2016 ◽  
Vol 6 (85) ◽  
pp. 81461-81465 ◽  
Author(s):  
M. Kohout ◽  
J. Vandenbussche ◽  
A. Roller ◽  
J. Tůma ◽  
J. Bogaerts ◽  
...  

The long-standing discussion of the absolute configuration of erythro-mefloquine is revisited, showcasing the strength of a combination of experimental and calculated vibrational circular dichroism spectroscopy.


2008 ◽  
Vol 73 (8-9) ◽  
pp. 1205-1221 ◽  
Author(s):  
Jiří Zedník ◽  
Jan Sedláček ◽  
Jan Svoboda ◽  
Jiří Vohlídal ◽  
Dmitrij Bondarev ◽  
...  

Dinuclear rhodium(I) η2:η2-cycloocta-1,5-diene (series a) and η2:η2-norborna-2,5-diene (series b) complexes with μ-RCOO- ligands, where R is linear C21H43 (complexes 1a, 1b), CH2CMe3 (2a, 2b), 1-adamantyl (3a, 3b) and benzyl (4a, 4b), have been prepared and characterized by spectroscopic methods. Structures of complexes 2b, 3a and 4a were determined by X-ray diffraction analysis. Complexes prepared show low to moderate catalytic activity in polymerization of phenylacetylene in THF giving high-cis-transoid polymers, but they show only oligomerization activity in dichloromethane.


1982 ◽  
Vol 47 (11) ◽  
pp. 2912-2921 ◽  
Author(s):  
Patricia Sierra ◽  
Ladislav Novotný ◽  
Zdeněk Samek ◽  
Miloš Buděšínský ◽  
Ladislav Dolejš ◽  
...  

From the endemic Cuban species Rauvolfia salicifolia GRISEB nine alkaloids were isolated of which the following seven had been already described: (+)-ajmalidine (I), (-)-reserpiline (II), (-)-isoreserpiline (III), (-)-isocarapanaubine (IV), (-)-ajmalicine (V), (+)-vellosimine (VI), and (+)-yohimbine (VII). The structure of (-)-raucubaine (VIII) had been previously determined by X-ray diffraction and the structure of the alkaloid (-)-raucubainine (IX) was suggested on the basis of its conversion to (-)-raucubaine (VIII). The absolute configuration of (-)-raucubaine and (-)-raucubainine was elucidated by CD spectroscopy.


2015 ◽  
Vol 39 (10) ◽  
pp. 7595-7601 ◽  
Author(s):  
Farid M. Sroor ◽  
Cristian G. Hrib ◽  
Liane Hilfert ◽  
Sabine Busse ◽  
Frank T. Edelmann

New unsolvated, homoleptic lanthanide(iii) tris(cyclopropylethinylamidinate) complexes of the type [c-C3H5–CC–C(NR)2]3Ln (R = iPr, cyclohexyl; Ln = Nd, Sm, Ho) have been prepared and the crystal structure of the holmium derivative [c-C3H5–CC–C(NiPr)2]3Ho has been confirmed by X-ray diffraction.


Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2457 ◽  
Author(s):  
Haifeng Zhao ◽  
Jing Lv ◽  
Junshan Sang ◽  
Li Zhu ◽  
Peng Zheng ◽  
...  

In this work, a mixing-calcination method was developed to facilely construct MXene/CuO nanocomposite. CuO and MXene were first dispersed in ethanol with sufficient mixing. After solvent evaporation, the dried mixture was calcinated under argon to produce a MXene/CuO nanocomposite. As characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and X-ray photoelectron spectra (XPS), CuO nanoparticles (60–100 nm) were uniformly distributed on the surface and edge of MXene nanosheets. Furthermore, as evaluated by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA), the high-temperature decomposition (HTD) temperature decrease of ammonium perchlorate (AP) upon addition of 1 wt% CuO (hybridized with 1 wt% MXene) was comparable with that of 2 wt% CuO alone, suggesting an enhanced catalytic activity of CuO on thermal decomposition of AP upon hybridization with MXene nanosheets. This strategy could be further applied to construct other MXene/transition metal oxide (MXene/TMO) composites with improved performance for various applications.


2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Omer Bin Sohail ◽  
P. A. Sreekumar ◽  
S. K. De ◽  
Masihullah Jabarullah Khan ◽  
Abbas Hakeem ◽  
...  

Ethylene polymerization was done to form polyethylene nano-composite with nanoaluminum nitride using zirconocene catalysts. Results show that the catalytic activity is maximum at a filler loading of 15 mg nanoaluminum nitride. Differential scanning calorimeter (DSC) and X-ray diffraction (XRD) results show that percentage crystallinity was also marginally higher at this amount of filler. Thermal behavior of polyethylene nanocomposites (0, 15, 30, and 45) mg was studied by DSC and thermal gravimetric analyzer (TGA). Morphology of the component with 15 mg aluminium nitride is more fibrous as compared to 0 mg aluminium nitride and higher filler loading as shown by SEM images. In order to understand combustibility behavior, tests were performed on microcalorimeter. Its results showed decrease in combustibility in polyethylene nanocomposites as the filler loading increases.


2013 ◽  
Vol 457-458 ◽  
pp. 139-143 ◽  
Author(s):  
Ming Tian Wang ◽  
Chang Ping Pan ◽  
Wei Peng Gai ◽  
Xiao Xia Lv ◽  
Min Gang Zhai ◽  
...  

A series of novel acidic ionic liquid: 1-ethyl-2-alkyl-benzimidazolium tetra-fluoroborate (alkyl= Et, Pr-n, Bu-n) were prepared by simple acid-based neutralization of 1-ethyl-2-alkyl-benzimidazole and tetrafluoroboric acid. The compounds were characterized by FTIR spectra, elemental analysis,1HNMR spectra and thermogravimetric analysis. These novel tetra-fluoroborate salts show good catalytic activity to esterification of benzyl alcohol and acetic acid. Furthermore, a crystal of ([H-ebBiBF4) was prepared with the crystal structure and determined by X-ray diffraction analysis. The molecular is of lamellar structure as mainly π electron ring is stacked interleaving between two layers. The results of cation and anion arranged orderly in pair indicate that the coulombic attraction is more dominant. Simultaneously, the weak local hydrogen bonds C-H···F exist in the molecules.


2014 ◽  
Vol 9 (9) ◽  
pp. 1934578X1400900 ◽  
Author(s):  
Juan D. Hernández-Hernández ◽  
Hugo A. García-Gutiérrez ◽  
Luisa U. Román-Marín ◽  
Yunuen I. Torres-Blanco ◽  
Carlos M. Cerda-García-Rojas ◽  
...  

The stems of Bursera multijuga afforded (-)-(1 S,3 E,7 R,8 R,11 E)-7,8-epoxycembra-3,11-dien-1-ol (1) and its acetate 2, together with cembrene A (3), nephthenol (4), and cembrenol (5). The structures of 1 and 2 were elucidated by 1D and 2D NMR, HRESIMS, and X-ray diffraction. The conformational preference of flexible 1 was studied by molecular modeling at the DFT B3LYP/DGDZVP level of theory. Good agreement between calculated and experimental vibrational circular dichroism curves established the absolute configuration of 1. This is the first time that cembrane derivatives have been isolated from the genus Bursera.


Catalysts ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1344
Author(s):  
Tim Van Everbroeck ◽  
Radu-George Ciocarlan ◽  
Wouter Van Hoey ◽  
Myrjam Mertens ◽  
Pegie Cool

Mixed oxides were synthesized by co-precipitation of a Cu source in combination with Al, Fe or Mn corresponding salts as precursors. The materials were calcined at 600 and 1000 °C in order to crystallize the phases and to mimic the reaction conditions of the catalytic application. At 600 °C a mixed spinel structure was only formed for the combination of Cu and Mn, while at 1000 °C all the materials showed mixed spinel formation. The catalysts were applied in three-way catalysis using a reactor with a gas mixture containing CO, NO and O2. All the materials calcined at 600 °C displayed the remarkable ability to oxidize CO with O2 but also to reduce NO with CO, while the pure oxides such as CuO and MnO2 were not able to. The high catalytic activity at 600 °C was attributed to small supported CuO particles present and imperfections in the spinel structure. Calcination at 1000 °C crystallized the structure further which led to a dramatic loss in catalytic activity, although CuAl2O4 and CuFe2O4 still converted some NO. The materials were characterized by X-ray diffraction (XRD), Raman spectroscopy, H2-Temperatrue Programmed Reduction (H2-TPR), N2-sorption and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX).


Sign in / Sign up

Export Citation Format

Share Document