scholarly journals Theoretical Investigation of Carbon Dioxide Adsorption on Li+-Decorated Nanoflakes

Molecules ◽  
2021 ◽  
Vol 26 (24) ◽  
pp. 7688
Author(s):  
Igor K. Petrushenko ◽  
Nikolay A. Ivanov ◽  
Konstantin B. Petrushenko

Recently, the capture of carbon dioxide, the primary greenhouse gas, has attracted particular interest from researchers worldwide. In the present work, several theoretical methods have been used to study adsorption of CO2 molecules on Li+-decorated coronene (Li+@coronene). It has been established that Li+ can be strongly anchored on coronene, and then a physical adsorption of CO2 will occur in the vicinity of this cation. Moreover, such a decoration has substantially improved interaction energy (Eint) between CO2 molecules and the adsorbent. One to twelve CO2 molecules per one Li+ have been considered, and their Eint values are in the range from −5.55 to −16.87 kcal/mol. Symmetry-adapted perturbation theory (SAPT0) calculations have shown that, depending on the quantity of adsorbed CO2 molecules, different energy components act as the main reason for attraction. AIMD simulations allow estimating gravimetric densities (GD, wt.%) at various temperatures, and the maximal GDs have been calculated to be 9.3, 6.0, and 4.9% at T = 77, 300, and 400 K, respectively. Besides this, AIMD calculations validate stability of Li+@coronene complexes during simulation time at the maximum CO2 loading. Bader’s atoms-in-molecules (QTAIM) and independent gradient model (IGM) techniques have been implemented to unveil the features of interactions between CO2 and Li+@coronene. These methods have proved that there exists a non-covalent bonding between the cation center and CO2. We suppose that findings, derived in this theoretical work, may also benefit the design of novel nanosystems for gas storage and delivery.

2018 ◽  
Author(s):  
Jaya Prakash Madda ◽  
Pilli Govindaiah ◽  
Sushant Kumar Jena ◽  
Sabbhavat Krishna ◽  
Rupak Kishor

<p>Covalent organic Imine polymers with intrinsic meso-porosity were synthesized by condensation reaction between 4,4-diamino diphenyl methane and (para/meta/ortho)-phthaladehyde. Even though these polymers were synthesized from precursors of bis-bis covalent link mode, the bulk materials were micrometer size particles with intrinsic mesoporous enables nitrogen as well as carbon dioxide adsorption in the void spaces. These polymers were showed stability up to 260<sup>o</sup> centigrade. Nitrogen gas adsorption capacity up to 250 cc/g in the ambient pressure was observed with type III adsorption characteristic nature. Carbon dioxide adsorption experiments reveal the possible terminal amine functional group to carbamate with CO<sub>2</sub> gas molecule to the polymers. One of the imine polymers, COP-3 showed more carbon dioxide sorption capacity and isosteric heat of adsorption (Q<sub>st</sub>) than COP-1 and COP-2 at 273 K even though COP-3 had lower porosity for nitrogen gas than COP-1 and COP-2. We explained the trends in gas adsorption capacities and Qst values as a consequence of the intra molecular interactions confirmed by Density Functional Theory computational experiments on small molecular fragments.</p>


Author(s):  
A Pertiwiningrum ◽  
R N Besari ◽  
M A Wuri ◽  
A W Harto ◽  
N A Fitriyanto ◽  
...  

2013 ◽  
Vol 395-396 ◽  
pp. 637-640
Author(s):  
Yi Yang ◽  
Zheng Ping Wang ◽  
Ling Meng ◽  
Lian Jun Wang

MIL-101, a metal-organic framework material, was synthesized by the high-temperature hydrothermal method. Triethylenetetramine (TETA) modification enabled the effective grafting of an amino group onto the surface of the materials and their pore structure. The crystal structure, micromorphology, specific surface area, and pore structure of the samples before and after modification were analyzed with an X-ray diffractometer, scanning electron microscope, specific surface and aperture tester, and infrared spectrometer. The carbon dioxide adsorption properties of the samples were determined by a thermal analyzer before and after TETA modification. Results show that moderate amino modification can effectively improve the microporous structure of MIL-101 and its carbon dioxide adsorption properties. After modification, the capacity of MIL-101 to adsorb carbon dioxide decreased only by 0.61 wt%, and a high adsorption capacity of 9.45 wt% was maintained after six cycles of adsorption testing at room temperature and ambient pressure.


2019 ◽  
Vol 2019 (22) ◽  
pp. 2674-2679 ◽  
Author(s):  
Sujing Wang ◽  
Mohammad Wahiduzzaman ◽  
Charlotte Martineau-Corcos ◽  
Guillaume Maurin ◽  
Christian Serre

2012 ◽  
Vol 22 (17) ◽  
pp. 8431 ◽  
Author(s):  
Hasmukh A. Patel ◽  
Ferdi Karadas ◽  
Ali Canlier ◽  
Joonho Park ◽  
Erhan Deniz ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document