scholarly journals Employing PCBTDPP as an Efficient Donor Polymer for High Performance Ternary Polymer Solar Cells

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1423 ◽  
Author(s):  
Xu ◽  
Saianand ◽  
Roy ◽  
Qiao ◽  
Reza ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Bulk Heterojunction ◽  
Polymer Solar Cells ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Donor Acceptor ◽  
Butyric Acid Methyl Ester ◽  
Ternary Polymer

A compatible low-bandgap donor polymer (poly[N-90-heptadecanyl-2,7carbazole-alt-3,6-bis(thiophen-5-yl)-2,5-dioctyl-2,5-dihydropyrrolo [3,4] pyrrole-1,4-dione], PCBTDPP) was judicially introduced into the archetypal poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PC61BM) photoactive system to fabricate highly efficient ternary based bulk heterojunction polymer solar cells (PSCs). The PCBTDPP ternary-based PSC with optimal loading (0.2 wt.%) displayed outstanding performance with a champion power conversion efficiency (PCE) of 5.28% as compared to the PCE (4.67%) for P3HT:PC61BM-based PSC (reference). The improved PCE for PCBTDPP ternary-based PSC can be mainly attributed to the incorporation of PCBTDPP into P3HT:PC61BM that beneficially improved the optical, morphological, electronic, and photovoltaic (PV) performance. This work instills a rational strategy for identifying components (donor/acceptor (D/A) molecules) with complementary beneficial properties toward fabricating efficient ternary PSCs.

scholarly journals Tandem polymer solar cells: simulation and optimization through a multiscale scheme

2017 ◽  
Vol 8 ◽  
pp. 123-133 ◽  
Author(s):  
Fanan Wei ◽  
Ligang Yao ◽  
Fei Lan ◽  
Guangyong Li ◽  
Lianqing Liu
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Polymer Solar Cells ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Multiscale Simulation ◽  
Acid Methyl ◽  
Donor Acceptor ◽  
Butyric Acid Methyl Ester ◽  
Simulation Scheme

In this paper, polymer solar cells with a tandem structure were investigated and optimized using a multiscale simulation scheme. In the proposed multiscale simulation, multiple aspects – optical calculation, mesoscale simulation, device scale simulation and optimal power conversion efficiency searching modules – were studied together to give an optimal result. Through the simulation work, dependencies of device performance on the tandem structures were clarified by tuning the thickness, donor/acceptor weight ratio as well as the donor–acceptor distribution in both active layers of the two sub-cells. Finally, employing searching algorithms, we optimized the power conversion efficiency of the tandem polymer solar cells and located the optimal device structure parameters. With the proposed multiscale simulation strategy, poly(3-hexylthiophene)/phenyl-C61-butyric acid methyl ester and (poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b]dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)])/phenyl-C61-butyric acid methyl ester based tandem solar cells were simulated and optimized as an example. Two configurations with different sub-cell sequences in the tandem photovoltaic device were tested and compared. The comparison of the simulation results between the two configurations demonstrated that the balance between the two sub-cells is of critical importance for tandem organic photovoltaics to achieve high performance. Consistency between the optimization results and the reported experimental results proved the effectiveness of the proposed simulation scheme.

scholarly journals Facile Synthetic Route of a Solution-Processable, Thieno[3,4-c]pyrrolo-4,6-dione-Based Conjugated Small Molecule and Control of the Optoelectronic Properties via Processing Additives

2018 ◽  
Vol 8 (12) ◽  
pp. 2644
Author(s):  
Obum Kwon ◽  
Jihyun Lim ◽  
Jin Park ◽  
Dong Wang
Keyword(s):  
Solar Cells ◽  
Small Molecule ◽  
Bulk Heterojunction ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Molecular Aggregation ◽  
Acid Methyl ◽  
New Type ◽  
Butyric Acid Methyl Ester ◽  
And Control

In this study, a new type of low-bandgap small molecule has been synthesized with a thieno[3,4-c]pyrrole-4,6-dione (TPD) derivative for application in bulk heterojunction (BJH) solar cells. The series of solar cells were fabricated by blending the TPD-based small molecule (M1) and [6,6]-phenyl C71 butyric acid methyl ester (PC71BM). In order to optimize the performance of solar cells, the nanoscale morphologies of the BHJ layers were controlled via processing additives with 1,8-diiodooctane (DIO) and 1-chloronaphthalene (CN). Therefore, we demonstrated that the use of CN successively suppressed molecular aggregation and demonstrated suitable phase separation, in addition to increasing the power conversion efficiency from 0.36% to 1.86%.

Tuning nanoscale morphology using mixed solvents and solvent vapor treatment for high performance polymer solar cells

RSC Advances ◽  
2014 ◽  
Vol 4 (89) ◽  
pp. 48724-48733 ◽  
Author(s):  
Dun Wang ◽  
Fujun Zhang ◽  
Lingliang Li ◽  
Jiangsheng Yu ◽  
Jian Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Performance ◽  
Polymer Solar Cells ◽  
Mixed Solvents ◽  
Acid Methyl Ester ◽  
Solvent Vapor ◽  
Acid Methyl ◽  
High Performance Polymer ◽  
Butyric Acid Methyl Ester ◽  
Vapor Treatment

A series of high performance polymer solar cells (PSCs) were fabricated with poly[(4,8-bis-(2-ethylhexyloxy)-benzo[1,2-b:4,5-b′](dithiophene)-2,6-diyl-alt-(4-(2-ethylhexanoyl)-thieno [3,4-b]thiophene)-2,6-diyl] (PBDTTT-EFT) as the donor and with [6,6]phenyl-C71-butyric acid methyl ester (PC71BM) as the acceptor.

scholarly journals A comparative approach to enhance the electrical performance of PEDOT:PSS as transparent electrode for organic solar cells

2019 ◽  
Vol 28 (1) ◽  
pp. 66-73
Author(s):  
Ismail Borazan ◽  
Ayşe Celik Bedeloğlu ◽  
Ali Demir
Keyword(s):  
Solar Cells ◽  
Organic Solar Cells ◽  
Isopropyl Alcohol ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Transparent Electrode ◽  
Electrical Performance ◽  
Comparative Approach ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

In this article, the improvement in electrical performance of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) (PEDOT:PSS) as the transparent electrode doped with different additives (ethylene glycol (EG), isopropyl alcohol) or treatment of sulfuric acid was enhanced that organic solar cells (OSCs) were produced by using poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl C61 butyric acid methyl ester. OSCs were fabricated by the doped or treated PEDOT:PSS films as transparent electrodes. The photoelectrical measurements were carried out and the effects of doping or treatment were compared. As a result, EG-added PEDOT:PSS electrode showed the best power conversion efficiency value of 1.87% among the PEDOT:PSS anodes.

A mono(carboxy)porphyrin-triazine-(bodipy)2triad as a donor for bulk heterojunction organic solar cells

2015 ◽  
Vol 3 (24) ◽  
pp. 6209-6217 ◽  
Author(s):  
Ganesh D. Sharma ◽  
S. A. Siddiqui ◽  
Agapi Nikiforou ◽  
Galateia E. Zervaki ◽  
Irene Georgakaki ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

A mono(carboxy)porphyrin-triazine-(bodipy)2triad(PorCOOH)(BDP)2has been used as a donor with ([6,6]-phenyl C71butyric acid methyl ester) (PC71BM) as an acceptor, in BHJ - solution processed organic solar cells.

Bulk-Heterojunction Solar Cells Based on Poly(3-hexylthiophene) and (6,6)-phenyl-C61-butyric-acid Methyl Ester on Polyethylene Terephthalate Substrates

2013 ◽  
Vol 538 ◽  
pp. 3-6
Author(s):  
Yuichiro Yanagi ◽  
Takanori Okukawa ◽  
Akira Yoshida ◽  
Masaya Ohzeki ◽  
Tatsuki Yanagidate ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Polyethylene Terephthalate ◽  
Butyric Acid ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Heterojunction Solar Cells ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Pet Substrate

Bulk-heterojunction solar cells were fabricated based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) on an indium tin oxide (ITO) coated flexible polyethylene terephthalate (PET) substrate. Performance improvements of the flexible solar cells by optimizing post thermal annealing conditions are reported. The solar cells annealed at 150 oC showed the minimal deformation of the PET substrate, and the resulted conversion efficiency was 1.35% under the light irradiation conditions of the Superscript textAM1.5 simulated solar intensity of 100 mW/cm2.

Sign in / Sign up

Export Citation Format

Share Document