scholarly journals An Attempt to Observe Vertical Land Motion along the Norwegian Coast by CryoSat-2 and Tide Gauges

2019 ◽  
Vol 11 (7) ◽  
pp. 744 ◽  
Author(s):  
Martina Idžanović ◽  
Christian Gerlach ◽  
Kristian Breili ◽  
Ole Andersen

Present-day climate-change-related ice-melting induces elastic glacial isostatic adjustment (GIA) effects, while paleo-GIA effects describe the ongoing viscous response to the melting of late-Pleistocene ice sheets. The unloading initiated an uplift of the crust close to the centers of former ice sheets. Today, vertical land motion (VLM) rates in Fennoscandia reach values up to around 10 mm/year and are dominated by GIA. Uplift signals from GIA can be computed by solving the sea-level equation (SLE), S ˙ = N ˙ − U ˙ . All three quantities can also be determined from geodetic observations: relative sea-level variations ( S ˙ ) are observed by means of tide gauges, while rates of absolute sea-level change ( N ˙ ) can be observed by satellite altimetry; rates of VLM ( U ˙ ) can be determined by GPS (Global Positioning System). Based on the SLE, U ˙ can be derived by combining sea-surface measurements from satellite altimetry and relative sea-level records from tide gauges. In the present study, we have combined 7.5 years of CryoSat-2 satellite altimetry and tide-gauge data to estimate linear VLM rates at 20 tide gauges along the Norwegian coast. Thereby, we made use of monthly averaged tide-gauge data from PSMSL (Permanent Service for Mean Sea Level) and a high-frequency tide-gauge data set with 10-min sampling rate from NMA (Norwegian Mapping Authority). To validate our VLM estimates, we have compared them with the independent semi-empirical land-uplift model NKG2016LU_abs for the Nordic-Baltic region, which is based on GPS, levelling, and geodynamical modeling. Estimated VLM rates from 1 Hz CryoSat-2 and high-frequency tide-gauge data reflect well the amplitude of coastal VLM as provided by NKG2016LU_abs. We find a coastal average of 2.4 mm/year (average over all tide gauges), while NKG2016LU_abs suggests 2.8 mm/year; the spatial correlation is 0.58.

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
H. Bâki Iz

AbstractThe residuals of 27 globally distributed long tide gauge recordswere scrutinized after removing the globally compounding effect of the periodic lunar node tides and almost periodic solar radiation’s sub and superharmonics from the tide gauge data. The spectral analysis of the residuals revealed additional unmodeled periodicities at decadal scales, 19 of which are within the close range of 12–14 years, at 27 tide gauge stations. The amplitudes of the periodicitieswere subsequently estimated for the spectrally detected periods and they were found to be statistically significant (p «0.05) for 18 out of 27 globally distributed tide gauge stations. It was shown that the estimated amplitudes at different localities may have biased the outcome of all the previous studies based on tide gauge or satellite altimetry data that did not account for these periodicities, within the range −0.5 – 0.5 mm/yr., acting as another confounder in detecting 21st century sea level rise.


2020 ◽  
Author(s):  
Peter Thejll

<p>Information on extremes of the sea-level is obtained from tide-gauge<br>records.  Such records may have gaps.</p><p>Estimates of potential changes in the size and/or frequency of sea-level<br>extremes are hampered by long gaps, or when just the high extremes are<br>missing due, e.g. to equipment failure.</p><p>Methods used for filling such gaps can be based on having multiple<br>records from gauges near each other; but what to do if there is<br>only one record? This problem can typically occur when old tide-gauge<br>records are used -- the use of multiple recorders at the same place is<br>more wide-spread today. However, especially older and therefore longer<br>records hold the key to obtaining long-baseline insights into the temporal<br>evolution of extreme tides and thus impacts of e.g. climate change.</p><p>In this work, we review and assess methods for gap filling. We asses using<br>the 'known truth' method, i.e. by applying realistic gaps to complete<br>gauge records and reconstructing and then comparing errors calculated as<br>the diffrence between modelled and actual values.  We compare a simple<br>harmonic model fit method to various spline methods as well as Neural<br>network and deep learning approches.  We also test a hybrid method<br>which uses not just tide-gauge data but also air pressure readings<br>from a meteorological station near the tide-gauge.</p><p>We then attempt to fill in the missing maxima of the Esbjerg, Denmark<br>hourly tide-gauge record since 1889. Particularly, before 1910 the maxima<br>above 300 cm are missing (Bijl, et al., 1999), and we try to fill these in.</p>


2020 ◽  
Author(s):  
Muharrem Hilmi Erkoç ◽  
Uğur Doğan ◽  
Seda Özarpacı ◽  
Hasan Yildiz ◽  
Erdinç Sezen

<p>This study aims to estimate vertical land motion (VLM) at tide gauges (TG), located in the Mediterranean, Aegean and the Marmara Sea coasts of Turkey, from differences of multimission satellite altimetry and TG sea level time series. Initially, relative sea level trends are estimated at 7 tide gauges stations operated by the Turkish General Directorate of Mapping over the period 2001-2019. Subsequently, absolute sea level trends independent from VLM are computed from multimission satellite altimetry data over the same period. We have computed estimates of linear trends of difference time series between altimetry and tide gauge sea level after removing seasonal signals by harmonic analysis from each time series to estimate the vertical land motion (VLM) at tide gauges. Traditional way of VLM determination at tide gauges is to use GPS@TG or preferably CGPS@TG data. We therefore, processed these GPS data, collected over the years by several TG-GPS campaigns and by continuous GPS stations close to the TG processed by GAMIT/GLOBK software. Subsequently, the GPS and CGPS vertical coordinate time series are used to estimate VLM. These two different VLM estimates, one from GPS and CGPS coordinate time series and other from altimetry-TG sea level time series differences are compared.</p><p> </p><p><strong>Keywords: Vertical land motion, Sea Level Changes, Tide gauge, Satellite altimetry, GPS, CGPS </strong></p>


2018 ◽  
Author(s):  
Molly E. Keogh ◽  
Torbjörn E. Törnqvist

Abstract. Although tide gauges are the primary source of data used to calculate multi-decadal to century-scale rates of relative sea-level change, we question the reliability of tide-gauge data in rapidly subsiding low-elevation coastal zones (LECZs). Tide gauges measure relative sea-level rise (RSLR) with respect to the base of associated benchmarks. Focusing on coastal Louisiana, the largest LECZ in the United States, we find that these benchmarks (n = 35) are anchored an average of 21.5 m below the land surface. Because at least 60 % of subsidence occurs in the top 5–10 m of the sediment column in this area, tide gauges in coastal Louisiana do not capture the primary contributor to RSLR. Similarly, GPS stations (n = 10) are anchored an average of > 14.3 m below the land surface and therefore also do not capture shallow subsidence. As a result, tide gauges and GPS stations in coastal Louisiana, and likely in LECZs worldwide, systematically underestimate rates of RSLR as experienced at the land surface. We present an alternative approach that explicitly measures RSLR in LECZs with respect to the land surface and eliminates the need for tide-gauge data. Shallow subsidence is measured by rod surface-elevation table‒marker horizons (RSET-MHs) and added to measurements of deep subsidence from GPS data, plus sea-level rise from satellite altimetry. We show that for a LECZ the size of coastal Louisiana (25,000–30,000 km2), about 40 RSET-MH instruments suffice to collect useful data. Rates of RSLR obtained from this approach are substantially higher than rates as inferred from tide-gauge data. We therefore conclude that LECZs may be at higher risk of flooding, and within a shorter time horizon, than previously assumed.


2018 ◽  
Vol 8 (1) ◽  
pp. 130-135 ◽  
Author(s):  
H. Bâki Iz ◽  
C. K. Shum ◽  
C. Y. Kuo

Abstract This observational study reports that several globally distributed tide gauge stations exhibit a propensity of statistically significant sea level accelerations during the satellite altimetry era. However, the magnitudes of the estimated tide gauge accelerations during this period are systematically and noticeably smaller than the global mean sea level acceleration reported by recent analyses of satellite altimetry. The differences are likely to be caused by the interannual, decadal and interdecadal sea level variations, which are modeled using a broken trend model with overlapping harmonics in the analyses of tide gauge data but omitted in the analysis of satellite altimetry.


2011 ◽  
Vol 76 (3-4) ◽  
pp. 137-151 ◽  
Author(s):  
Itthi Trisirisatayawong ◽  
Marc Naeije ◽  
Wim Simons ◽  
Luciana Fenoglio-Marc

2017 ◽  
Author(s):  
Se-Hyeon Cheon ◽  
Benjamin D. Hamlington ◽  
Kyung-Duck Suh

Abstract. Since the advent of the modern satellite altimeter era, the understanding of the sea level has increased dramatically. The satellite altimeter record, however, dates back only to the 1990s. The tide gauge record, on the other hand, extends through the 20th century, but with poor spatial coverage when compared to the satellites. Many studies have been conducted to extend the spatial resolution of the satellite data into the past by finding novel ways to combine the satellite data and tide gauge data in what are known as sea level reconstructions. However, most of the reconstructions of sea level were conducted on a global scale, leading to reduced accuracy on regional levels, particularly where there are relatively few tide gauges. The sea around the Korean Peninsula is one such area with few tide gauges prior to 1960. In this study, new methods are proposed to reconstruct the past sea level and project the future sea level around the Korean Peninsula. Using spatial patterns obtained from a cyclo-stationary empirical orthogonal function decomposition of satellite data, we reconstruct sea level over the time period from 1900 to 2014. Sea surface temperature data and altimeter data are used simultaneously in the reconstruction process, leading to an elimination of reliance on tide gauge data. Although the tide gauge data was not used in the reconstruction process, the reconstructed results showed better agreement with the tide gauge observations in the region than previous studies that incorporated the TG data. This study demonstrates a reconstruction technique that can be used on regional levels, with particular emphasis on areas with poor tide gauge coverage.


Sign in / Sign up

Export Citation Format

Share Document