scholarly journals Inherent Optical Properties in Lake Taihu Derived from VIIRS Satellite Observations

2019 ◽  
Vol 11 (12) ◽  
pp. 1426 ◽  
Author(s):  
Wei Shi ◽  
Menghua Wang ◽  
Yunlin Zhang

Using in situ remote sensing reflectance and inherent optical property (IOP) measurements, a near-infrared (NIR)-based IOP algorithm is developed and tuned for Lake Taihu, in order to derive the particle backscattering coefficient bbp(λ), total absorption coefficient at(λ), dissolved and detrital absorption coefficient adg(λ), and phytoplankton absorption coefficient aph(λ), with satellite observations from the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership (SNPP). The IOP algorithm for Lake Taihu has a reasonably good accuracy. In fact, the determination coefficients between the retrieved and in situ IOPs are 0.772, 0.638, and 0.487 for at(λ), adg(λ), and aph(λ), respectively. The IOP products in Lake Taihu that have been derived from VIIRS-SNPP observations show significant spatial and temporal variations. Southern Lake Taihu features enhanced bbp(λ) and adg(λ), while northern Lake Taihu shows higher aph(λ). The seasonal and interannual variability of adg(λ) and bbp(λ) in Lake Taihu is quantified and characterized with the highest bbp(λ) and adg(λ) in the winter, and the lowest in the summer. In the winter, bbp(443) and adg(443) can reach over ~1.5 and ~5.0 m−1, respectively, while they are ~0.5–1.0 and ~2.0 m−1 in the summer. This study shows that in Lake Taihu adg(λ) is the most significant IOP, while aph(λ) is the least in terms of the IOP values and contributions to remote sensing reflectance. The highest bbp(λ) and adg(λ) occurred in the winter between 2017–2018, and the lowest bbp(λ) and adg(λ) occurred in the summer of 2014. In comparison, the seasonal and interannual variability of mean aph(λ) for Lake Taihu is less significant, even though enhanced seasonal and interannual variability can be found in some parts of Lake Taihu, such as in the northern Lake Taihu region.

2019 ◽  
Vol 11 (2) ◽  
pp. 184 ◽  
Author(s):  
Kun Xue ◽  
Ronghua Ma ◽  
Dian Wang ◽  
Ming Shen

Optical water types (OWTs) were identified from remote sensing reflectance (Rrs(λ)) values in a field-measured dataset of several large lakes in the lower reaches of the Yangtze and Huai River (LYHR) Basin. Four OWTs were determined from normalized remote sensing reflectance spectra (NRrs(λ)) using the k-means clustering approach, and were identified in the Sentinel 3A OLCI (Ocean Land Color Instrument) image data over lakes in the LYHR Basin. The results showed that 1) Each OWT is associated with different bio-optical properties, such as the concentration of chlorophyll-a (Chla), suspended particulate matter (SPM), proportion of suspended particulate inorganic matter (SPIM), and absorption coefficient of each component. One optical water type showed an obvious characteristic with a high contribution of mineral particles, while one type was mostly determined by a high content of phytoplankton. The other types belonged to the optically mixed water types. 2) Class-specific Chla inversion algorithms performed better for all water types, except type 4, compared to the overall dataset. In addition, class-specific inversion algorithms for estimating the Chla-specific absorption coefficient of phytoplankton at 443 nm (a*ph(443)) were developed based on the relationship between a*ph(443) and Chla of each OWT. The spatial variations in the class-specific model-derived a*ph(443) values were illustrated for 2 March 2017, and 24 October 2017. 3) The dominant water type and the Shannon index (H) were used to characterize the optical variability or similarity of the lakes in the LYHR Basin using cloud-free OLCI images in 2017. A high optical variation was located in the western and southern parts of Lake Taihu, the southern part of Lake Hongze, Lake Chaohu, and several small lakes near the Yangtze River, while the northern part of Lake Hongze had a low optical diversity. This work demonstrates the potential and necessity of optical classification in estimating bio-optical parameters using class-specific inversion algorithms and monitoring of the optical variations in optically complex and dynamic lake waters.


2020 ◽  
Vol 12 (1) ◽  
pp. 163 ◽  
Author(s):  
Shuying Bai ◽  
Jixi Gao ◽  
Deyong Sun ◽  
Meirong Tian

Water transparency represented by the Secchi disk depth (Zsd) plays an important role in understanding water ecology environment variations, especially for optically complex and shallow lake waters. In this study, using in situ measured remote sensing reflectance (Rrs), diffuse attenuation coefficient (Kd), and Zsd data collected in Lake Taihu (China), a regional algorithm for estimating Kd from Rrs was designed, and the semi-analytical model proposed by Lee et al. (2015) (hereafter called Lee_2015 model) was refined using a linear scaling correction for remote sensing of Zsd. The results showed that a good agreement between the derived Kd and in situ measured data (mean absolute percentage error (MAPE) = 26% for Kd(490); MAPE < 5% for Kd at 443, 555, and 660 nm). The in situ Rrs-derived Zsd results using the refined Lee_2015 model compared well with the in situ measured Zsd (R2 = 0.72 and MAPE = 36%), which was an obvious improvement over the Lee_2015 model in our study region. Subsequently, the refined Lee_2015 model was applied to the geostationary ocean color imager (GOCI) observations between 2012 and 2018 to yield the spatial and temporal variations of water transparency in the Lake Taihu waters. The long-term mean distribution of Zsd revealed that water transparency values in the northeastern Lake Taihu were generally higher than those in the southwest part. Monthly climatological Zsd patterns suggested that the Zsd distributions had large temporal variability, and distinct monthly patterns of Zsd existed in different subregions of Lake Taihu. The significant interannual variations of Zsd in Lake Taihu are probably affected by a combination of the water column stability mainly caused by wind, water temperature, human activity, and riverine discharge. The present study can provide a new approach for quantifying water visibility and serve for water-color remote sensing of optically complex and highly turbid waters.


Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2699 ◽  
Author(s):  
Jian Li ◽  
Liqiao Tian ◽  
Qingjun Song ◽  
Zhaohua Sun ◽  
Hongjing Yu ◽  
...  

Monitoring of water quality changes in highly dynamic inland lakes is frequently impeded by insufficient spatial and temporal coverage, for both field surveys and remote sensing methods. To track short-term variations of chlorophyll fluorescence and chlorophyll-a concentrations in Poyang Lake, the largest freshwater lake in China, high-frequency, in-situ, measurements were collected from two fixed stations. The K-mean clustering method was also applied to identify clusters with similar spatio-temporal variations, using remote sensing Chl-a data products from the MERIS satellite, taken from 2003 to 2012. Four lake area classes were obtained with distinct spatio-temporal patterns, two of which were selected for in situ measurement. Distinct daily periodic variations were observed, with peaks at approximately 3:00 PM and troughs at night or early morning. Short-term variations of chlorophyll fluorescence and Chl-a levels were revealed, with a maximum intra-diurnal ratio of 5.1 and inter-diurnal ratio of 7.4, respectively. Using geostatistical analysis, the temporal range of chlorophyll fluorescence and corresponding Chl-a variations was determined to be 9.6 h, which indicates that there is a temporal discrepancy between Chl-a variations and the sampling frequency of current satellite missions. An analysis of the optimal sampling strategies demonstrated that the influence of the sampling time on the mean Chl-a concentrations observed was higher than 25%, and the uncertainty of any single Terra/MODIS or Aqua/MODIS observation was approximately 15%. Therefore, sampling twice a day is essential to resolve Chl-a variations with a bias level of 10% or less. The results highlight short-term variations of critical water quality parameters in freshwater, and they help identify specific design requirements for geostationary earth observation missions, so that they can better address the challenges of monitoring complex coastal and inland environments around the world.


2020 ◽  
Vol 12 (10) ◽  
pp. 1586
Author(s):  
Leonardo F. Arias-Rodriguez ◽  
Zheng Duan ◽  
Rodrigo Sepúlveda ◽  
Sergio I. Martinez-Martinez ◽  
Markus Disse

Remote-sensing-based machine learning approaches for water quality parameters estimation, Secchi Disk Depth (SDD) and Turbidity, were developed for the Valle de Bravo reservoir in central Mexico. This waterbody is a multipurpose reservoir, which provides drinking water to the metropolitan area of Mexico City. To reveal the water quality status of inland waters in the last decade, evaluation of MERIS imagery is a substantial approach. This study incorporated in-situ collected measurements across the reservoir and remote sensing reflectance data from the Medium Resolution Imaging Spectrometer (MERIS). Machine learning approaches with varying complexities were tested, and the optimal model for SDD and Turbidity was determined. Cross-validation demonstrated that the satellite-based estimates are consistent with the in-situ measurements for both SDD and Turbidity, with R2 values of 0.81 to 0.86 and RMSE of 0.15 m and 0.95 nephelometric turbidity units (NTU). The best model was applied to time series of MERIS images to analyze the spatial and temporal variations of the reservoir’s water quality from 2002 to 2012. Derived analysis revealed yearly patterns caused by dry and rainy seasons and several disruptions were identified. The reservoir varied from trophic to intermittent hypertrophic status, while SDD ranged from 0–1.93 m and Turbidity up to 23.70 NTU. Results suggest the effects of drought events in the years 2006 and 2009 on water quality were correlated with water quality detriment. The water quality displayed slow recovery through 2011–2012. This study demonstrates the usefulness of satellite observations for supporting inland water quality monitoring and water management in this region.


2015 ◽  
Vol 54 (3) ◽  
pp. 546 ◽  
Author(s):  
Zhongping Lee ◽  
Jianwei Wei ◽  
Ken Voss ◽  
Marlon Lewis ◽  
Annick Bricaud ◽  
...  

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4285 ◽  
Author(s):  
Shubha Sathyendranath ◽  
Robert Brewin ◽  
Carsten Brockmann ◽  
Vanda Brotas ◽  
Ben Calton ◽  
...  

Ocean colour is recognised as an Essential Climate Variable (ECV) by the Global Climate Observing System (GCOS); and spectrally-resolved water-leaving radiances (or remote-sensing reflectances) in the visible domain, and chlorophyll-a concentration are identified as required ECV products. Time series of the products at the global scale and at high spatial resolution, derived from ocean-colour data, are key to studying the dynamics of phytoplankton at seasonal and inter-annual scales; their role in marine biogeochemistry; the global carbon cycle; the modulation of how phytoplankton distribute solar-induced heat in the upper layers of the ocean; and the response of the marine ecosystem to climate variability and change. However, generating a long time series of these products from ocean-colour data is not a trivial task: algorithms that are best suited for climate studies have to be selected from a number that are available for atmospheric correction of the satellite signal and for retrieval of chlorophyll-a concentration; since satellites have a finite life span, data from multiple sensors have to be merged to create a single time series, and any uncorrected inter-sensor biases could introduce artefacts in the series, e.g., different sensors monitor radiances at different wavebands such that producing a consistent time series of reflectances is not straightforward. Another requirement is that the products have to be validated against in situ observations. Furthermore, the uncertainties in the products have to be quantified, ideally on a pixel-by-pixel basis, to facilitate applications and interpretations that are consistent with the quality of the data. This paper outlines an approach that was adopted for generating an ocean-colour time series for climate studies, using data from the MERIS (MEdium spectral Resolution Imaging Spectrometer) sensor of the European Space Agency; the SeaWiFS (Sea-viewing Wide-Field-of-view Sensor) and MODIS-Aqua (Moderate-resolution Imaging Spectroradiometer-Aqua) sensors from the National Aeronautics and Space Administration (USA); and VIIRS (Visible and Infrared Imaging Radiometer Suite) from the National Oceanic and Atmospheric Administration (USA). The time series now covers the period from late 1997 to end of 2018. To ensure that the products meet, as well as possible, the requirements of the user community, marine-ecosystem modellers, and remote-sensing scientists were consulted at the outset on their immediate and longer-term requirements as well as on their expectations of ocean-colour data for use in climate research. Taking the user requirements into account, a series of objective criteria were established, against which available algorithms for processing ocean-colour data were evaluated and ranked. The algorithms that performed best with respect to the climate user requirements were selected to process data from the satellite sensors. Remote-sensing reflectance data from MODIS-Aqua, MERIS, and VIIRS were band-shifted to match the wavebands of SeaWiFS. Overlapping data were used to correct for mean biases between sensors at every pixel. The remote-sensing reflectance data derived from the sensors were merged, and the selected in-water algorithm was applied to the merged data to generate maps of chlorophyll concentration, inherent optical properties at SeaWiFS wavelengths, and the diffuse attenuation coefficient at 490 nm. The merged products were validated against in situ observations. The uncertainties established on the basis of comparisons with in situ data were combined with an optical classification of the remote-sensing reflectance data using a fuzzy-logic approach, and were used to generate uncertainties (root mean square difference and bias) for each product at each pixel.


Sign in / Sign up

Export Citation Format

Share Document