scholarly journals Development of Global Tropospheric Empirical Correction Model with High Temporal Resolution

2020 ◽  
Vol 12 (4) ◽  
pp. 721
Author(s):  
Chaoqian Xu ◽  
Yibin Yao ◽  
Junbo Shi ◽  
Qi Zhang ◽  
Wenjie Peng

The accuracy of global tropospheric empirical models depends on the model expression and the modeling data sources. Although the current temporal resolution of available models is usually one day, it is anticipated that this will be improved in the future. To achieve compatibility with future high temporal-resolution data sources, this study develops a new global tropospheric correction model, the Wuhan-University Global Tropospheric Empirical Model (WGTEM). Evaluation of WGTEM model expression determines that it has better precision than other models, and this is attributed to its ability to consider diurnal variations in meteorological parameters and the double-peak daily variation in air pressure, which are not concerned in other models. The external accuracy of the WGTEM was evaluated after modeling with the European Centre for Medium-range Weather Forecasts (ECMWF) ERA-Interim products, and results show its accuracy exceeds that of the current ITG model and its Zenith Tropospheric Delay (ZTD) performance is also superior.

2021 ◽  
Author(s):  
Karina Wilgan ◽  
Witold Rohm ◽  
Jaroslaw Bosy ◽  
Alain Geiger ◽  
M. Adnan Siddique ◽  
...  

<p>The microwave signals passing through the troposphere are delayed by refraction. Its high variations, both in time and space, are caused mainly by water vapor. The tropospheric delay used to be considered only as a source of error that needed to be removed. Nowadays, these delays are also a source of interest. The tropospheric delays or integrated water vapor are being assimilated into nowcasting or numerical weather prediction (NWP) models. Moreover, long time series of tropospheric observations have become an important source of information for climate studies. On the other hand, the meteorological data support the space-geodetic community by providing models that can be used to reduce the troposphere impact on the signal propagation. Furthermore, the delays calculated by one microwave technique can be used to mitigate the errors in others.</p><p>There are several ways of observing the troposphere, especially considering water vapor. The classical meteorological are: in-situ measurements, radiosondes or radiometers, which allow to sense the amount of water vapor directly. Another, indirect way of observing the water vapor distribution is by using the Global Navigation Satellite Systems (GNSS). This method is called GNSS meteorology. Other microwave techniques such as Very Long Baseline Interferometry (VLBI) or Interferometric Synthetic Aperture Radar (InSAR) are also capable to retrieve the atmospheric information from their signals.</p><p>This contribution shows an overview of the troposphere sensing techniques and their applications. We present multi-comparisons of the tropospheric parameters, i.e. refractivity, tropospheric delays in zenith and slant directions and integrated water vapor. The integration of the different data sources often leads to an improved accuracy of the tropospheric products but requires a careful preparation of data. The combination of the data sources allows for using the techniques of complementary properties, for example InSAR with very high spatial resolution with GNSS observations of high temporal resolution. With the emergence of new technologies, some traditional ways of tropospheric measurements can be augmented with the new methods. For example, we have tested meteo-drones as an alternative to radiosondes. The comparisons with GNSS data shows a good agreement of the drone and microwave data, even better than with radiosonde. Moreover, we present the results of the GNSS data assimilation into NWP models and the developments towards multi-GNSS, real-time assimilation of advanced products such as slant delays and horizontal tropospheric gradients.</p>


2020 ◽  
Author(s):  
Karina Wilgan ◽  
Witold Rohm ◽  
Jaroslaw Bosy ◽  
Alain Geiger ◽  
M. Adnan Siddique ◽  
...  

<p>Microwave signals passing through the troposphere are delayed by refraction. Its high variations, both in time and space, are caused mainly by water vapor. The tropospheric delay used to be considered only as a source of error that needed to be removed. Nowadays, these delays are also a source of interest, for example, tropospheric delays or integrated water vapor information are being assimilated into nowcasting or numerical weather prediction (NWP) models. Moreover, long time series of tropospheric observations have become an important source of information for climate studies. On the other hand, the meteorological data is supporting the space-geodetic community by providing models that can be used to reduce the troposphere impact on the signal propagation.</p><p>There are several ways of observing the troposphere, especially considering water vapor.  First one are the classical meteorological: in-situ measurements, radiosondes or radiometers, from which we can sense directly the amount of water vapor. Another, indirect way of observing the water vapor distribution is by using the Global Navigation Satellite Systems (GNSS). This method is called GNSS meteorology. Other microwave techniques such as Very Long Baseline Interferometry (VLBI), Interferometric Synthetic Aperture Radar (InSAR) or space-based Radio Occultations (RO) can also be used in a similar way to GNSS.</p><p>This contribution presents an overview of the troposphere sensing techniques with examples of their applications. We present a multi-comparison of the tropospheric products, i.e. refractivity, tropospheric delays in zenith and slant directions and integrated water vapor. The integration of the different data sources often leads to an improved accuracy of the tropospheric products but requires a careful preparation of data. The combination of the data sources allows for using techniques of complementary properties, for example InSAR with very high spatial resolution with GNSS observations of high temporal resolution. With the emergence of new technologies, some traditional ways of tropospheric measurements can be augmented with the new methods. For example, we have tested meteo-drones as an alternative to radiosondes. The comparisons with GNSS data shows a good agreement of the drone and microwave data, even better than with radiosondes.</p>


2010 ◽  
Vol 6 (2) ◽  
pp. 43 ◽  
Author(s):  
Andreas H Mahnken ◽  

Over the last decade, cardiac computed tomography (CT) technology has experienced revolutionary changes and gained broad clinical acceptance in the work-up of patients suffering from coronary artery disease (CAD). Since cardiac multidetector-row CT (MDCT) was introduced in 1998, acquisition time, number of detector rows and spatial and temporal resolution have improved tremendously. Current developments in cardiac CT are focusing on low-dose cardiac scanning at ultra-high temporal resolution. Technically, there are two major approaches to achieving these goals: rapid data acquisition using dual-source CT scanners with high temporal resolution or volumetric data acquisition with 256/320-slice CT scanners. While each approach has specific advantages and disadvantages, both technologies foster the extension of cardiac MDCT beyond morphological imaging towards the functional assessment of CAD. This article examines current trends in the development of cardiac MDCT.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Alexander H. Frank ◽  
Robert van Geldern ◽  
Anssi Myrttinen ◽  
Martin Zimmer ◽  
Johannes A. C. Barth ◽  
...  

AbstractThe relevance of CO2 emissions from geological sources to the atmospheric carbon budget is becoming increasingly recognized. Although geogenic gas migration along faults and in volcanic zones is generally well studied, short-term dynamics of diffusive geogenic CO2 emissions are mostly unknown. While geogenic CO2 is considered a challenging threat for underground mining operations, mines provide an extraordinary opportunity to observe geogenic degassing and dynamics close to its source. Stable carbon isotope monitoring of CO2 allows partitioning geogenic from anthropogenic contributions. High temporal-resolution enables the recognition of temporal and interdependent dynamics, easily missed by discrete sampling. Here, data is presented from an active underground salt mine in central Germany, collected on-site utilizing a field-deployed laser isotope spectrometer. Throughout the 34-day measurement period, total CO2 concentrations varied between 805 ppmV (5th percentile) and 1370 ppmV (95th percentile). With a 400-ppm atmospheric background concentration, an isotope mixing model allows the separation of geogenic (16–27%) from highly dynamic anthropogenic combustion-related contributions (21–54%). The geogenic fraction is inversely correlated to established CO2 concentrations that were driven by anthropogenic CO2 emissions within the mine. The described approach is applicable to other environments, including different types of underground mines, natural caves, and soils.


2021 ◽  
Author(s):  
D. Kersebaum ◽  
S.‐C. Fabig ◽  
M. Sendel ◽  
A. C. Muntean ◽  
R. Baron ◽  
...  

2021 ◽  
Vol 30 ◽  
pp. S205
Author(s):  
N. Lammoza ◽  
P. Ratnakanthan ◽  
T. Moran ◽  
P. O'Sullivan ◽  
K. O'Donnell ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document