GNSS-R-Based Snow Water Equivalent Estimation with Empirical Modeling and Enhanced SNR-Based Snow Depth Estimation

Snow depth and snow water equivalent (SWE) are two parameters for measuring snowfall. By exploiting the Global Navigation Satellite System reflectometry (GNSS-R) technique and thousands of existing GNSS Continuous Operating Reference Stations (CORS) deployed in the cryosphere, it is possible to improve the temporal and spatial resolutions of the SWE measurement. In this paper, a fusion model for combining multi-satellite SNR (Signal to Noise Ratio) snow depth estimations is proposed, which uses peak spectral powers associated with each of the snow depth estimations. To simplify the estimation of SWE, the complete snowfall period over a winter season is split into snow accumulation, transition, and melting period in accordance with the variation characteristics of snow depth and SWE. By extensively using in situ snow depth and SWE observations recorded by snow telemetry network (SNOTEL) and regression analysis, three empirical models are developed to describe the relationship between snow depth and SWE for the three periods, respectively. Based on the snow depth fusion model and the SWE empirical models, an SWE estimation algorithm is proposed. Three data sets recorded in different environments are used to test the proposed method. The results demonstrate that there exists good agreement between the in situ SWE measurements and the SWE estimates produced by the proposed method; the root-mean-square error of SWE estimations is smaller than 6 cm when the SWE is up to 80 cm.

Download Full-text

Assimilation of snow cover and snow depth into a snow model to estimate snow water equivalent and snowmelt runoff in a Himalayan catchment

The Cryosphere ◽

10.5194/tc-11-1647-2017 ◽

2017 ◽

Vol 11 (4) ◽

pp. 1647-1664 ◽

Cited By ~ 29

Author(s):

Emmy E. Stigter ◽

Niko Wanders ◽

Tuomo M. Saloranta ◽

Joseph M. Shea ◽

Marc F. P. Bierkens ◽

...

Keyword(s):

Kalman Filter ◽

Data Assimilation ◽

Snow Cover ◽

Climate Sensitivity ◽

Snow Depth ◽

Snow Water Equivalent ◽

Snowmelt Runoff ◽

Snow Water ◽

Snow Model

Abstract. Snow is an important component of water storage in the Himalayas. Previous snowmelt studies in the Himalayas have predominantly relied on remotely sensed snow cover. However, snow cover data provide no direct information on the actual amount of water stored in a snowpack, i.e., the snow water equivalent (SWE). Therefore, in this study remotely sensed snow cover was combined with in situ observations and a modified version of the seNorge snow model to estimate (climate sensitivity of) SWE and snowmelt runoff in the Langtang catchment in Nepal. Snow cover data from Landsat 8 and the MOD10A2 snow cover product were validated with in situ snow cover observations provided by surface temperature and snow depth measurements resulting in classification accuracies of 85.7 and 83.1 % respectively. Optimal model parameter values were obtained through data assimilation of MOD10A2 snow maps and snow depth measurements using an ensemble Kalman filter (EnKF). Independent validations of simulated snow depth and snow cover with observations show improvement after data assimilation compared to simulations without data assimilation. The approach of modeling snow depth in a Kalman filter framework allows for data-constrained estimation of snow depth rather than snow cover alone, and this has great potential for future studies in complex terrain, especially in the Himalayas. Climate sensitivity tests with the optimized snow model revealed that snowmelt runoff increases in winter and the early melt season (December to May) and decreases during the late melt season (June to September) as a result of the earlier onset of snowmelt due to increasing temperature. At high elevation a decrease in SWE due to higher air temperature is (partly) compensated by an increase in precipitation, which emphasizes the need for accurate predictions on the changes in the spatial distribution of precipitation along with changes in temperature.

Download Full-text

Validation of modeled snow properties in Afghanistan, Pakistan, and Tajikistan

10.5194/tc-2019-150 ◽

2019 ◽

Author(s):

Edward H. Bair ◽

Karl Rittger ◽

Jawairia A. Ahmad ◽

Doug Chabot

Keyword(s):

Snow Depth ◽

Snow Water Equivalent ◽

Median Number ◽

In Situ Measurements ◽

Snow Properties ◽

Wide Range ◽

Spatial Estimates ◽

Snow Water ◽

Critical Layers

Abstract. Ice and snowmelt feed the Indus and Amu Darya rivers, yet there are limited in situ measurements of these resources. Previous work in the region has shown promise using snow water equivalent (SWE) reconstruction, which requires no in situ measurements, but validation has been a problem until recently when we were provided with daily manual snow depth measurements from Afghanistan, Tajikistan, and Pakistan by the Aga Khan Agency for Habitat (AKAH). For each station, accumulated precipitation and SWE were derived from snow depth using the SNOWPACK model. High-resolution (500 m) reconstructed SWE estimates from the ParBal model were then compared to the modeled SWE at the stations. The Alpine3D model was then used to create spatial estimates at 25 km to compare with estimates from other snow models. Additionally, the coupled SNOWPACK and Alpine3D system has the advantage of simulating snow profiles, which provide stability information. Following previous work, the median number of critical layers and percentage of facets across all of the pixels containing the AKAH stations was computed. For SWE at the point scale, the reconstructed estimates showed a bias of −42 mm (−19 %) at the peak. For the coarser spatial SWE estimates, the various models showed a wide range, with reconstruction being on the lower end. For stratigraphy, a heavily faceted snowpack is observed in both years, but 2018, a dry year, according to most of the models, showed more critical layers that persisted for a longer period.

Download Full-text

Modeling Snow Depth and Snow Water Equivalent Distribution and Variation Characteristics in the Irtysh River Basin, China

Applied Sciences ◽

10.3390/app11188365 ◽

2021 ◽

Vol 11 (18) ◽

pp. 8365

Author(s):

Liming Gao ◽

Lele Zhang ◽

Yongping Shen ◽

Yaonan Zhang ◽

Minghao Ai ◽

...

Keyword(s):

Snow Cover ◽

River Basin ◽

Snow Depth ◽

Snow Water Equivalent ◽

Snow Accumulation ◽

Implicit Scheme ◽

Snow Water ◽

Irtysh River ◽

Simulation Results ◽

The Irtysh River

Accurate simulation of snow cover process is of great significance to the study of climate change and the water cycle. In our study, the China Meteorological Forcing Dataset (CMFD) and ERA-Interim were used as driving data to simulate the dynamic changes in snow depth and snow water equivalent (SWE) in the Irtysh River Basin from 2000 to 2018 using the Noah-MP land surface model, and the simulation results were compared with the gridded dataset of snow depth at Chinese meteorological stations (GDSD), the long-term series of daily snow depth dataset in China (LSD), and China’s daily snow depth and snow water equivalent products (CSS). Before the simulation, we compared the combinations of four parameterizations schemes of Noah-MP model at the Kuwei site. The results show that the rainfall and snowfall (SNF) scheme mainly affects the snow accumulation process, while the surface layer drag coefficient (SFC), snow/soil temperature time (STC), and snow surface albedo (ALB) schemes mainly affect the melting process. The effect of STC on the simulation results was much higher than the other three schemes; when STC uses a fully implicit scheme, the error of simulated snow depth and snow water equivalent is much greater than that of a semi-implicit scheme. At the basin scale, the accuracy of snow depth modeled by using CMFD and ERA-Interim is higher than LSD and CSS snow depth based on microwave remote sensing. In years with high snow cover, LSD and CSS snow depth data are seriously underestimated. According to the results of model simulation, it is concluded that the snow depth and snow water equivalent in the north of the basin are higher than those in the south. The average snow depth, snow water equivalent, snow days, and the start time of snow accumulation (STSA) in the basin did not change significantly during the study period, but the end time of snow melting was significantly advanced.

Download Full-text

Improved Northern Hemisphere Snow Water Equivalent product from passive microwave remote sensing and in situ data

10.5194/egusphere-egu21-1325 ◽

2021 ◽

Author(s):

Colleen Mortimer ◽

Lawrence Mudryk ◽

Chris Derksen ◽

Kari Luojus ◽

Pinja Venalainen ◽

...

Keyword(s):

Spatial Resolution ◽

Snow Depth ◽

Snow Water Equivalent ◽

Microwave Remote Sensing ◽

Passive Microwave ◽

Snow Density ◽

Snow Season ◽

Snow Water ◽

Snow Mass

The European Space Agency Snow CCI+ project provides global homogenized long time series of daily snow extent and snow water equivalent (SWE). The Snow CCI SWE product is built on the Finish Meteorological Institute's GlobSnow algorithm, which combines passive microwave data with in situ snow depth information to estimate SWE. The CCI SWE product improves upon previous versions of GlobSnow through targeted changes to the spatial resolution, ancillary data, and snow density parameterization.Previous GlobSnow SWE products used a constant snow density of 0.24 kg m-3 to convert snow depth to SWE. The CCI SWE product applies spatially and temporally varying density fields, derived by krigging in situ snow density information from historical snow transects to correct biases in estimated SWE. Grid spacing was improved from 25 km to 12.5 km by applying an enhanced spatial resolution microwave brightness temperature dataset. We assess step-wise how each of these targeted changes acts to improve or worsen the product by evaluating with snow transect measurements and comparing hemispheric snow mass and trend differences.Together, when compared to GlobSnow v3, these changes improved RMSE by ~5 cm and correlation by ~0.1 against a suite of snow transect measurements from Canada, Finland, and Russia. Although the hemispheric snow mass anomalies of CCI SWE and GlobSnow v3 are similar, there are sizeable differences in the climatological SWE, most notably a one month delay in the timing of peak SWE and lower SWE during the accumulation season. These shifts were expected because the variable snow density is lower than the former fixed value of 0.24 kg m-3 early in the snow season, but then increases over the course of the snow season. We also examine intermediate products to determine the relative improvements attributable solely to the increased spatial resolution versus changes due to the snow density parameterizations. Such systematic evaluations are critical to directing future product development.

Download Full-text

Development of a Snow Load Alert System, “YukioroSignal” for Aiding Roof Snow Removal Decisions in Snowy Areas in Japan

Journal of Disaster Research ◽

10.20965/jdr.2020.p0688 ◽

2020 ◽

Vol 15 (6) ◽

pp. 688-697

Author(s):

Hiroyuki Hirashima ◽

Tsutomu Iyobe ◽

Katsuhisa Kawashima ◽

Hiroaki Sano ◽

◽

...

Keyword(s):

Snow Depth ◽

Load Distribution ◽

Snow Water Equivalent ◽

Snow Accumulation ◽

Risk Level ◽

Residential Areas ◽

Alert System ◽

Snow Removal ◽

Snow Load ◽

Snow Water

This study developed a snow load alert system, known as the “YukioroSignal”; this system aims to provide a widespread area for assessing snow load distribution and the information necessary for aiding house roof snow removal decisions in snowy areas of Japan. The system was released in January 2018 in Niigata Prefecture, Japan, and later, it was expanded to Yamagata and Toyama prefectures in January 2019. The YukioroSignal contains two elements: the “Quasi-Real-Time Snow Depth Monitoring System,” which collects snow depth data, and the numerical model known as SNOWPACK, which can calculate the snow water equivalent (SWE). The snow load per unit area is estimated to be equivalent to SWE. Based on the house damage risk level, snow load distribution was indicated by colors following the ISO 22324. The system can also calculate post-snow removal snow loads. The calculated snow load was validated by using the data collected through snow pillows. The simulated snow load had a root mean square error (RMSE) of 21.3%, which was relative to the observed snow load. With regard to residential areas during the snow accumulation period, the RMSE was 13.2%. YukioroSignal received more than 56,000 pageviews in the snowheavy 2018 period and 26,000 pageviews in the less snow-heavy 2019 period.

Download Full-text

Spatiotemporal Characteristics of Snowpack Density in the Mountainous Regions of the Western United States

Journal of Hydrometeorology ◽

10.1175/2008jhm981.1 ◽

2008 ◽

Vol 9 (6) ◽

pp. 1416-1426 ◽

Cited By ~ 45

Author(s):

Naoki Mizukami ◽

Sanja Perica

Keyword(s):

United States ◽

Snow Depth ◽

Snow Water Equivalent ◽

Winter Season ◽

Western United States ◽

Densification Rate ◽

Snow Density ◽

Mountainous Regions ◽

Spatiotemporal Characteristics ◽

Snow Water

Abstract Snow density is calculated as a ratio of snow water equivalent to snow depth. Until the late 1990s, there were no continuous simultaneous measurements of snow water equivalent and snow depth covering large areas. Because of that, spatiotemporal characteristics of snowpack density could not be well described. Since then, the Natural Resources Conservation Service (NRCS) has been collecting both types of data daily throughout the winter season at snowpack telemetry (SNOTEL) sites located in the mountainous areas of the western United States. This new dataset provided an opportunity to examine the spatiotemporal characteristics of snowpack density. The analysis of approximately seven years of data showed that at a given location and throughout the winter season, year-to-year snowpack density changes are significantly smaller than corresponding snow depth and snow water equivalent changes. As a result, reliable climatological estimates of snow density could be obtained from relatively short records. Snow density magnitudes and densification rates (i.e., rates at which snow densities change in time) were found to be location dependent. During early and midwinter, the densification rate is correlated with density. Starting in early or mid-March, however, snowpack density increases by approximately 2.0 kg m−3 day−1 regardless of location. Cluster analysis was used to obtain qualitative information on spatial patterns of snowpack density and densification rates. Four clusters were identified, each with a distinct density magnitude and densification rate. The most significant physiographic factor that discriminates between clusters was proximity to a large water body. Within individual mountain ranges, snowpack density characteristics were primarily dependent on elevation.

Download Full-text

Changes in Snow Storage in the Upper Hron River Basin (Slovakia)

Acta Silvatica et Lignaria Hungarica ◽

10.2478/aslh-2014-0011 ◽

2014 ◽

Vol 10 (2) ◽

pp. 145-160

Author(s):

Katarína Kotríková ◽

Kamila Hlavčová ◽

Róbert Fencík

Keyword(s):

Snow Cover ◽

Snow Depth ◽

Satellite Images ◽

Snow Water Equivalent ◽

Winter Season ◽

Kendall Test ◽

Measured Data ◽

Time Step ◽

Snow Storage ◽

Snow Water

Abstract An evaluation of changes in the snow cover in mountainous basins in Slovakia and a validation of MODIS satellite images are provided in this paper. An analysis of the changes in snow cover was given by evaluating changes in the snow depth, the duration of the snow cover, and the simulated snow water equivalent in a daily time step using a conceptual hydrological rainfall-runoff model with lumped parameters. These values were compared with the available measured data at climate stations. The changes in the snow cover and the simulated snow water equivalent were estimated by trend analysis; its significance was tested using the Mann-Kendall test. Also, the satellite images were compared with the available measured data. From the results, it is possible to see a decrease in the snow depth and the snow water equivalent from 1961-2010 in all the months of the winter season, and significant decreasing trends were indicated in the months of December, January and February

Download Full-text

Climate sensitivity of snow water equivalent and snowmelt runoff in a Himalayan catchment

10.5194/tc-2016-216 ◽

2016 ◽

Cited By ~ 1

Author(s):

Emmy E. Stigter ◽

Niko Wanders ◽

Tuomo M. Saloranta ◽

Joseph M. Shea ◽

Marc F.P. Bierkens ◽

...

Keyword(s):

Kalman Filter ◽

Snow Cover ◽

Climate Sensitivity ◽

Snow Depth ◽

Snow Water Equivalent ◽

Snowmelt Runoff ◽

Snow Water ◽

Snow Model ◽

Increasing Temperature

Abstract. Snow is an important component of water storage in the Himalayas. Previous snowmelt studies in the Himalayas have predominantly relied on remotely sensed snow cover. However this provides no information on the actual amount of water stored in a snowpack i.e. the snow water equivalent (SWE). Therefore, in this study remotely sensed snow cover was combined with in situ meteorological observations and a modified version of the seNorge snow model to estimate climate sensitivity of SWE and snowmelt runoff in the Langtang catchment in Nepal. Landsat 8 and MOD10A2 snow cover maps were validated with in situ snow cover observations provided by surface temperature and snow depth measurements resulting in classification accuracies of 85.7 % and 83.1 % respectively. Optimal model parameter values were obtained through data assimilation of MOD10A2 snow maps and snow depth measurements using an Ensemble Kalman filter. The approach of modelling snow depth in a Kalman filter framework allows for data-constrained estimation of SWE rather than snow cover alone and this has great potential for future studies in the Himalayas. Climate sensitivity tests with the optimized snow model show a strong decrease in SWE in the valley with increasing temperature. However, at high elevation a decrease in SWE is (partly) compensated by an increase in precipitation, which emphasizes the need for accurate predictions on the changes in the spatial distribution of precipitation along with changes in temperature. Finally the climate sensitivity study revealed that snowmelt runoff increases in winter and early melt season (December to May) and decreases during the late melt season (June to September) as a result of the earlier onset of snowmelt due to increasing temperature.

Download Full-text

Snow-pillow: creation experience and prototype operation

E3S Web of Conferences ◽

10.1051/e3sconf/202016305009 ◽

2020 ◽

Vol 163 ◽

pp. 05009

Author(s):

Aleksandr Minnegaliev ◽

Ruslan Rakhimov ◽

Ruslan Suleimanov ◽

Mansur Gainanshin

Keyword(s):

Snow Water Equivalent ◽

Winter Season ◽

Operating Experience ◽

Snow Accumulation ◽

Analytical Models ◽

Federal State ◽

Digital Indicator ◽

Instrumental Observations ◽

Snow Water ◽

Observation Results

A snow-pillow (or snow-measuring pillow) is a device designed to directly determine the snow water equivalent in the snow cover by measuring the weight or pressure of the snowfall. Snow-pillows allow collecting, accumulating and transmitting information about snow accumulation and snow melting with high discreteness, accuracy and promptness. Within the framework of implementing the initiated project, a snow-pillow prototype was created based on analogue strain-measuring sensors working in conjunction with an accumulating mechanism and a digital indicator run via a microcontroller. Subject to agreement with the directorate of the Federal State Budgetary Institution “Bashkir UGMS”, the snow-pillow prototype was installed on the territory of the meteorological station Ufa-Dema in November 2019. Placing the pillow at the active weather observation station allows comparing the results obtained from the prototype with the data obtained at the station. Comparing the observation results for the autumn-winter season of 2019 has allowed us to conclude that the results obtained at the snow pillow are in line with the data of instrumental observations. The operating experience of the snow pillow shows that the prototype created under the project is applicable for evaluating the snow water equivalent, provided some minor changes are introduced into the design. In the future, observation results obtained from a network of snow pillows can be used for adjusting analytical models of snow accumulation and melting within the territory.

Download Full-text

Continuous and autonomous snow water equivalent measurements by a cosmic ray sensor on an alpine glacier

The Cryosphere ◽

10.5194/tc-13-3413-2019 ◽

2019 ◽

Vol 13 (12) ◽

pp. 3413-3434 ◽

Cited By ~ 2

Author(s):

Rebecca Gugerli ◽

Nadine Salzmann ◽

Matthias Huss ◽

Darin Desilets

Keyword(s):

Snow Depth ◽

Snow Water Equivalent ◽

Cosmic Ray ◽

Snow Accumulation ◽

Scaling Factor ◽

High Temporal Resolution ◽

High Mountain ◽

Alpine Glacier ◽

Snow Drift ◽

Snow Water

Abstract. Snow water equivalent (SWE) measurements of seasonal snowpack are crucial in many research fields. Yet accurate measurements at a high temporal resolution are difficult to obtain in high mountain regions. With a cosmic ray sensor (CRS), SWE can be inferred from neutron counts. We present the analyses of temporally continuous SWE measurements by a CRS on an alpine glacier in Switzerland (Glacier de la Plaine Morte) over two winter seasons (2016/17 and 2017/18), which differed markedly in the amount and timing of snow accumulation. By combining SWE with snow depth measurements, we calculate the daily mean density of the snowpack. Compared to manual field observations from snow pits, the autonomous measurements overestimate SWE by +2 % ± 13 %. Snow depth and the bulk snow density deviate from the manual measurements by ±6 % and ±9 %, respectively. The CRS measured with high reliability over two winter seasons and is thus considered a promising method to observe SWE at remote alpine sites. We use the daily observations to classify winter season days into those dominated by accumulation (solid precipitation, snow drift), ablation (snow drift, snowmelt) or snow densification. For each of these process-dominated days the prevailing meteorological conditions are distinct. The continuous SWE measurements were also used to define a scaling factor for precipitation amounts from nearby meteorological stations. With this analysis, we show that a best-possible constant scaling factor results in cumulative precipitation amounts that differ by a mean absolute error of less than 80 mm w.e. from snow accumulation at this site.

Download Full-text