The Importance of Subsurface Processes in Land Surface Modeling over a Temperate Region: An Analysis with SMAP, Cosmic Ray Neutron Sensing and Triple Collocation Analysis

Land surface models (LSMs) simulate water and energy cycles at the atmosphere–soil interface, however, the physical processes in the subsurface are typically oversimplified and lateral water movement is neglected. Here, a cross-evaluation of land surface model results (with and without lateral flow processes), the National Aeronautics and Space Administration (NASA) Soil Moisture Active/Passive (SMAP) mission soil moisture product, and cosmic-ray neutron sensor (CRNS) measurements is carried out over a temperate climate region with cropland and forests over western Germany. Besides a traditional land surface model (the Community Land Model (CLM) version 3.5), a coupled land surface-subsurface model (CLM-ParFlow) is applied. Compared to CLM stand-alone simulations, the coupled CLM-ParFlow model considered both vertical and lateral water movement. In addition to standard validation metrics, a triple collocation (TC) analysis has been performed to help understanding the random error variances of different soil moisture datasets. In this study, it is found that the three soil moisture datasets are consistent. The coupled and uncoupled model simulations were evaluated at CRNS sites and the coupled model simulations showed less bias than the CLM-standalone model (−0.02 cm3 cm−3 vs. 0.07 cm3 cm−3), similar random errors, but a slightly smaller correlation with the measurements (0.67 vs. 0.71). The TC-analysis showed that CLM-ParFlow reproduced better soil moisture dynamics than CLM stand alone and with a higher signal-to-noise ratio. This suggests that the representation of subsurface physics is of major importance in land surface modeling and that coupled land surface-subsurface modeling is of high interest.

Download Full-text

Optimally Merging Precipitation to Minimize Land Surface Modeling Errors

Journal of Applied Meteorology and Climatology ◽

10.1175/2009jamc2305.1 ◽

2010 ◽

Vol 49 (3) ◽

pp. 415-423 ◽

Cited By ~ 6

Author(s):

M. Tugrul Yilmaz ◽

Paul Houser ◽

Roshan Shrestha ◽

Valentine G. Anantharaj

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Surface Modeling ◽

Surface Model ◽

Surface Parameter ◽

Land Surface Modeling ◽

Precipitation Product ◽

Land Surface Parameter ◽

Modeling Errors

Abstract This paper introduces a new method to improve land surface model skill by merging different available precipitation datasets, given that an accurate land surface parameter ground truth is available. Precipitation datasets are merged with the objective of improving terrestrial water and energy cycle simulation skill, unlike most common methods in which the merging skills are evaluated by comparing the results with gauge data or selected reference data. The optimal merging method developed in this study minimizes the simulated land surface parameter (soil moisture, temperature, etc.) errors using the Noah land surface model with the Nelder–Mead (downhill simplex) method. In addition to improving the simulation skills, this method also impedes the adverse impacts of single-source precipitation data errors. Analysis has indicated that the results from the optimally merged precipitation product have fewer errors in other land surface states and fluxes such as evapotranspiration (ET), discharge R, and skin temperature T than do simulation results obtained by forcing the model using the precipitation products individually. It is also found that, using this method, the true knowledge of soil moisture information minimized land surface modeling errors better than the knowledge of other land surface parameters (ET, R, and T). Results have also shown that, although it does not have the true precipitation information, the method has associated heavier weights with the precipitation product that has intensity, amount, and frequency that are similar to those of the true precipitation.

Download Full-text

Using Cosmic-Ray Neutron Probes in Validating Satellite Soil Moisture Products and Land Surface Models

Water ◽

10.3390/w11071362 ◽

2019 ◽

Vol 11 (7) ◽

pp. 1362 ◽

Cited By ~ 2

Author(s):

Mustafa Berk Duygu ◽

Zuhal Akyürek

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Cosmic Ray ◽

Surface Model ◽

High Temporal Resolution ◽

Land Surface Models ◽

Statistical Measures ◽

Surface Models ◽

Global Land

Soil moisture content is one of the most important parameters of hydrological studies. Cosmic-ray neutron sensing is a promising proximal soil moisture sensing technique at intermediate scale and high temporal resolution. In this study, we validate satellite soil moisture products for the period of March 2015 and December 2018 by using several existing Cosmic Ray Neutron Probe (CRNP) stations of the COSMOS database and a CRNP station that was installed in the south part of Turkey in October 2016. Soil moisture values, which were inferred from the CRNP station in Turkey, are also validated using a time domain reflectometer (TDR) installed at the same location and soil water content values obtained from a land surface model (Noah LSM) at various depths (0.1 m, 0.3 m, 0.6 m and 1.0 m). The CRNP has a very good correlation with TDR where both measurements show consistent changes in soil moisture due to storm events. Satellite soil moisture products obtained from the Soil Moisture and Ocean Salinity (SMOS), the METOP-A/B Advanced Scatterometer (ASCAT), Soil Moisture Active Passive (SMAP), Advanced Microwave Scanning Radiometer 2 (AMSR2), Climate Change Initiative (CCI) and a global land surface model Global Land Data Assimilation System (GLDAS) are compared with the soil moisture values obtained from CRNP stations. Coefficient of determination ( r 2 ) and unbiased root mean square error (ubRMSE) are used as the statistical measures. Triple Collocation (TC) was also performed by considering soil moisture values obtained from different soil moisture products and the CRNPs. The validation results are mainly influenced by the location of the sensor and the soil moisture retrieval algorithm of satellite products. The SMAP surface product produces the highest correlations and lowest errors especially in semi-arid areas whereas the ASCAT product provides better results in vegetated areas. Both global and local land surface models’ outputs are highly compatible with the CRNP soil moisture values.

Download Full-text

ERA-5 and ERA-Interim driven ISBA land surface model simulations: which one performs better?

Hydrology and Earth System Sciences ◽

10.5194/hess-22-3515-2018 ◽

2018 ◽

Vol 22 (6) ◽

pp. 3515-3532 ◽

Cited By ~ 74

Author(s):

Clement Albergel ◽

Emanuel Dutra ◽

Simon Munier ◽

Jean-Christophe Calvet ◽

Joaquin Munoz-Sabater ◽

...

Keyword(s):

Remote Sensing ◽

Soil Moisture ◽

Land Surface ◽

Snow Depth ◽

Land Surface Model ◽

Surface Model ◽

Area Index ◽

Model Simulations ◽

In Situ Observations

Abstract. The European Centre for Medium-Range Weather Forecasts (ECMWF) recently released the first 7-year segment of its latest atmospheric reanalysis: ERA-5 over the period 2010–2016. ERA-5 has important changes relative to the former ERA-Interim atmospheric reanalysis including higher spatial and temporal resolutions as well as a more recent model and data assimilation system. ERA-5 is foreseen to replace ERA-Interim reanalysis and one of the main goals of this study is to assess whether ERA-5 can enhance the simulation performances with respect to ERA-Interim when it is used to force a land surface model (LSM). To that end, both ERA-5 and ERA-Interim are used to force the ISBA (Interactions between Soil, Biosphere, and Atmosphere) LSM fully coupled with the Total Runoff Integrating Pathways (TRIP) scheme adapted for the CNRM (Centre National de Recherches Météorologiques) continental hydrological system within the SURFEX (SURFace Externalisée) modelling platform of Météo-France. Simulations cover the 2010–2016 period at half a degree spatial resolution. The ERA-5 impact on ISBA LSM relative to ERA-Interim is evaluated using remote sensing and in situ observations covering a substantial part of the land surface storage and fluxes over the continental US domain. The remote sensing observations include (i) satellite-driven model estimates of land evapotranspiration, (ii) upscaled ground-based observations of gross primary production, (iii) satellite-derived estimates of surface soil moisture and (iv) satellite-derived estimates of leaf area index (LAI). The in situ observations cover (i) soil moisture, (ii) turbulent heat fluxes, (iii) river discharges and (iv) snow depth. ERA-5 leads to a consistent improvement over ERA-Interim as verified by the use of these eight independent observations of different land status and of the model simulations forced by ERA-5 when compared with ERA-Interim. This is particularly evident for the land surface variables linked to the terrestrial hydrological cycle, while variables linked to vegetation are less impacted. Results also indicate that while precipitation provides, to a large extent, improvements in surface fields (e.g. large improvement in the representation of river discharge and snow depth), the other atmospheric variables play an important role, contributing to the overall improvements. These results highlight the importance of enhanced meteorological forcing quality provided by the new ERA-5 reanalysis, which will pave the way for a new generation of land-surface developments and applications.

Download Full-text

Improving estimates of UK soil moisture using the JULES land surface model with COSMOS-UK measurements in the LaVEnDAR data assimilation framework

10.5194/egusphere-egu2020-11566 ◽

2020 ◽

Author(s):

Elizabeth Cooper ◽

Ewan Pinnington ◽

Richard Ellis ◽

Eleanor Blyth ◽

Simon Dadson ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Soil Texture ◽

Land Surface ◽

Land Surface Model ◽

Cosmic Ray ◽

Surface Model ◽

Soil Physics ◽

Soil Moisture Sensors ◽

The Uk

Soil moisture predictions are increasingly important in hydrological, ecological and agricultural applications. In recent years the availability of wide-area assessments of current and future soil-moisture states has grown, yet few studies have combined model-based assessments with observations beyond the point scale. Here we use the JULES land surface model together with COSMOS-UK data to evaluate the extent to which data assimilation can improve predictions of soil moisture across the United Kingdom.COSMOS-UK is a network of soil moisture sensors run by UKCEH. The network provides soil moisture measurements at around 50 sites throughout the UK using innovative Cosmic Ray Neutron Sensors (CRNS). Half hourly measurements of the meteorological variables that the Joint UK Land Environment Simulator (JULES) requires as driving data are also recorded at COSMOS-UK sites, allowing us to run JULES at observation locations. This provides a unique opportunity to compare soil moisture outputs from JULES with CRNS observations; these measurements have a footprint of up to 12 ha (approx 30 acres) and are therefore better scale matched with JULES outputs than those from point sensors.We have used the Land Variational Ensemble Data Assimilation Framework (LaVEnDAR) to combine soil moisture estimates from JULES with daily CRNS observations from one year at a number of COSMOS-UK sites. We show that this results in improved soil moisture predictions from JULES over several years. This has been achieved by optimising parameters in the pedo-transfer function used to derive JULES soil physics parameters from soil texture information. Using data assimilation with LaVEnDAR in this way allows us to explore the relationships between soil moisture estimates, soil physics parameters and soil texture, as well as improving the agreement between JULES model outputs and observations.

Download Full-text

Scale Impact of Soil Moisture Observations to Noah-MP Land Surface Model Simulations

Remote Sensing ◽

10.3390/rs12071169 ◽

2020 ◽

Vol 12 (7) ◽

pp. 1169

Author(s):

Jifu Yin ◽

Xiwu Zhan

Keyword(s):

Soil Moisture ◽

Spatial Resolution ◽

Land Surface ◽

Land Surface Model ◽

Surface Model ◽

Synthetic Experiment ◽

Model Simulations ◽

Coarse Spatial Resolution ◽

Satellite Microwave ◽

National Water

Due to the limitations of satellite antenna technology, current operational microwave soil moisture (SM) data products are typically at tens of kilometers spatial resolutions. Many approaches have thus been proposed to generate finer resolution SM data using ancillary information, but it is still unknown if assimilation of the finer spatial resolution SM data has beneficial impacts on model skills. In this paper, a synthetic experiment is thus conducted to identify the benefits of SM observations at a finer spatial resolution on the Noah-MP land surface model. Results of this study show that the performance of the Noah-MP model is significantly improved with the benefits of assimilating 1 km SM observations in comparison with the assimilation of SM data at coarser resolutions. Downscaling satellite microwave SM observations from coarse spatial resolution to 1 km resolution is recommended, and the assimilation of 1 km remotely sensed SM retrievals is suggested for NOAA National Weather Service and National Water Center.

Download Full-text

Land surface Verification Toolkit (LVT) – a generalized framework for land surface model evaluation

Geoscientific Model Development Discussions ◽

10.5194/gmdd-5-229-2012 ◽

2012 ◽

Vol 5 (1) ◽

pp. 229-276 ◽

Cited By ~ 1

Author(s):

S. V. Kumar ◽

C. D. Peters-Lidard ◽

J. Santanello ◽

K. Harrison ◽

Y. Liu ◽

...

Keyword(s):

Data Assimilation ◽

Model Evaluation ◽

Land Surface ◽

Spatial Scales ◽

Land Surface Model ◽

Formal System ◽

Surface Modeling ◽

Surface Model ◽

Diagnostic Model ◽

Land Surface Modeling

Abstract. Model evaluation and verification are key in improving the usage and applicability of simulation models for real-world applications. In this article, the development and capabilities of a formal system for land surface model evaluation called the Land surface Verification Toolkit (LVT) is described. LVT is designed to provide an integrated environment for systematic land model evaluation and facilitates a range of verification approaches and analysis capabilities. LVT operates across multiple temporal and spatial scales and employs a large suite of in-situ, remotely sensed and other model and reanalysis datasets in their native formats. In addition to the traditional accuracy-based measures, LVT also includes uncertainty and ensemble diagnostics, information theory measures, spatial similarity metrics and scale decomposition techniques that provide novel ways for performing diagnostic model evaluations. Though LVT was originally designed to support the land surface modeling and data assimilation framework known as the Land Information System (LIS), it supports hydrological data products from non-LIS environments as well. In addition, the analysis of diagnostics from various computational subsystems of LIS including data assimilation, optimization and uncertainty estimation are supported within LVT. Together, LIS and LVT provide a robust end-to-end environment for enabling the concepts of model data fusion for hydrological applications. The evolving capabilities of LVT framework are expected to facilitate rapid model evaluation efforts and aid the definition and refinement of formal evaluation procedures for the land surface modeling community.

Download Full-text

Improving soil moisture prediction of a high-resolution land surface model by parameterising pedotransfer functions through assimilation of SMAP satellite data

Hydrology and Earth System Sciences ◽

10.5194/hess-25-1617-2021 ◽

2021 ◽

Vol 25 (3) ◽

pp. 1617-1641

Author(s):

Ewan Pinnington ◽

Javier Amezcua ◽

Elizabeth Cooper ◽

Simon Dadson ◽

Rich Ellis ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Mean Squared Error ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Surface Model ◽

Squared Error ◽

Surface Models

Abstract. Pedotransfer functions are used to relate gridded databases of soil texture information to the soil hydraulic and thermal parameters of land surface models. The parameters within these pedotransfer functions are uncertain and calibrated through analyses of point soil samples. How these calibrations relate to the soil parameters at the spatial scale of modern land surface models is unclear because gridded databases of soil texture represent an area average. We present a novel approach for calibrating such pedotransfer functions to improve land surface model soil moisture prediction by using observations from the Soil Moisture Active Passive (SMAP) satellite mission within a data assimilation framework. Unlike traditional calibration procedures, data assimilation always takes into account the relative uncertainties given to both model and observed estimates to find a maximum likelihood estimate. After performing the calibration procedure, we find improved estimates of soil moisture and heat flux for the Joint UK Land Environment Simulator (JULES) land surface model (run at a 1 km resolution) when compared to estimates from a cosmic-ray soil moisture monitoring network (COSMOS-UK) and three flux tower sites. The spatial resolution of the COSMOS probes is much more representative of the 1 km model grid than traditional point-based soil moisture sensors. For 11 cosmic-ray neutron soil moisture probes located across the modelled domain, we find an average 22 % reduction in root mean squared error, a 16 % reduction in unbiased root mean squared error and a 16 % increase in correlation after using data assimilation techniques to retrieve new pedotransfer function parameters.

Download Full-text

Improving Soil Moisture Prediction of a High–Resolution Land Surface Model by Parameterising Pedotransfer Functions through Assimilation of SMAP Satellite Data

10.5194/hess-2020-303 ◽

2020 ◽

Author(s):

Ewan Pinnington ◽

Javier Amezcua ◽

Elizabeth Cooper ◽

Simon Dadson ◽

Rich Ellis ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Mean Squared Error ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Surface Model ◽

Squared Error ◽

Surface Models

Abstract. Pedotransfer functions are used to relate gridded databases of soil texture information to the soil hydraulic and thermal parameters of land surface models. The parameters within these pedotransfer functions are uncertain and calibrated through analyses of point soil samples. How these calibrations relate to the soil parameters at the spatial scale of modern land surface models is unclear, because gridded databases of soil texture represent an area average. We present a novel approach for calibrating such pedotransfer functions to improve land surface model soil moisture prediction by using observations from the Soil Moisture Active Passive (SMAP) satellite mission within a data assimilation framework. Unlike traditional calibration procedures data assimilation always takes into account the relative uncertainties given to both model and observed estimates to find a maximum likelihood estimate. After performing the calibration procedure we find improved estimates of soil moisture for the JULES land surface model (run at a 1 km resolution) when compared to estimates from a cosmic-ray soil moisture monitoring network (COSMOS-UK). The spatial resolution of these COSMOS probes is much more representative of the 1 km model grid than traditional point based soil moisture sensors. For 11 cosmic-ray neutron soil moisture probes located across the modelled domain we find an average 22 % reduction in root-mean squared error, a 16 % reduction in unbiased root-mean squared error and a 16 % increase in correlation after using data assimilation techniques to retrieve new pedotransfer function parameters.

Download Full-text

Improving soil moisture predictions from a land surface model by optimisation of pedotransfer functions.

10.5194/ismc2021-81 ◽

2021 ◽

Author(s):

Elizabeth Cooper ◽

Eleanor Blyth ◽

Hollie Cooper ◽

Richard Ellis ◽

Ewan Pinnington ◽

...

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Small Scale ◽

Surface Model ◽

Land Surface Models ◽

Field Scale ◽

Surface Models

Accurate soil moisture predictions from land surface models are important in hydrological, ecological and agricultural applications. Despite increasing availability of wide area soil moisture measurements, few studies have combined soil moisture predictions from models with in-situ observations beyond the point scale. This work uses the LAVENDAR data assimilation framework to markedly improve soil moisture estimates from the JULES land surface model using field scale Cosmic Ray Neutron sensor observations from the UKCEH COSMOS-UK network. Rather than directly updating modelled soil moisture estimates towards measured values, we optimize constants in the underlying pedotransfer functions (PTF) which relate soil texture to soil hydraulics parameters. In this way we generate a single set of newly calibrated PTFs based on field scale observations from a number of UK sites with different soil types. We demonstrate that calibrating PTFs in this way can improve the performance of JULES. Further, we suggest that calibrating PTFs for the soils on which they are to be used and at the scales at which land surface models are applied (rather than on small-scale soil samples) will ultimately improve the performance of land surface models, potentially leading to improvements in flood, drought and climate projections.

Download Full-text