scholarly journals Improving Angular Accuracy of a Scanning Mirror Based on Error Modeling and Correction

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 367 ◽  
Author(s):  
Yue Fan ◽  
Wenli Ma ◽  
Ping Jiang ◽  
Jinlong Huang ◽  
Kewei Chen ◽  
...  
Keyword(s):  
Eddy Current ◽  
Correction Method ◽  
Calculation Model ◽  
Error Model ◽  
Error Modeling ◽  
Angular Error ◽  
Displacement Sensor ◽  
Physical Parameters ◽  
Loop Control ◽  
Scanning Mirror

Scanning mirrors appear to be key components in optoelectronic systems for line-of-sight (LOS) stabilization. For improving the angular accuracy of a scanning mirror based on the eddy current displacement sensor measurement, an angular error-correction method is proposed and demonstrated. A mathematic angular error model with physical parameters was developed, and the cross-validation method was employed to determine the reasonable order of the Maclaurin series used in the error model, which increased the exactitude and robustness of the correction method. The error parameters were identified by accurately fitting the calibrated angular errors with the error model, which showed excellent error prediction performance. Based on the angular calculation model corrected by the error model, the closed-loop control system was established to obtain accurate deflection angles. Experimental results show that within the deflection angle of ±1.5 deg, the angular accuracy was improved from 0.28 deg to less than 1.1 arcsec, and the standard deviation for six measurements was less than 1.2 arcsec, which indicates that the angle correction method was effective in improving the linearity of the eddy current sensors and reducing the influence of manufacturing and installation errors.

Output Voltage Characteristics of Eddy Current Displacement Sensor for Various Heat Treatments of Measuring Objects

2008 ◽  
Vol 128 (4) ◽  
pp. 289-297 ◽  
Author(s):  
Tsutomu Mizuno ◽  
Shigemi Enoki ◽  
Takashi Asahina ◽  
Takayuki Suzuki ◽  
Hiroyuki Maeda ◽  
...  
Keyword(s):  
Eddy Current ◽  
Output Voltage ◽  
Heat Treatments ◽  
Displacement Sensor

Temperature Invariant Phenomenon in Dual Coil Eddy Current Displacement Sensor: Investigation, Verification and Application

2019 ◽  
Vol 19 (21) ◽  
pp. 9680-9687 ◽  
Author(s):  
Yating Yu ◽  
Hanchao Li ◽  
Ke Xue ◽  
Dahuan Liu ◽  
Geng Gao
Keyword(s):  
Eddy Current ◽  
Displacement Sensor

Design calculation model of oil fluid property parameter knowledge database for production logging

2020 ◽  
Vol 20 (3) ◽  
pp. 951-958
Author(s):  
Wenguang Song ◽  
Qiongqin Jiang
Keyword(s):  
Crude Oil ◽  
Expert Knowledge ◽  
Calculation Model ◽  
Physical Parameters ◽  
Base System ◽  
Design Calculation ◽  
Calculation Methods ◽  
Fluid Property ◽  
Knowledge Base System ◽  
Parameter Values

The fluid property parameter calculation affects the accuracy of the interpretation the accuracy, in the interpretation of the liquid production profile. Therefore, it is particularly important to accurately calculate the physical property parameter values, in the establishment of the fluid property parameter expert knowledge base system. The main physical parameters include the following calculation methods of the oil. The oil property parameter conversion formula mainly studies the formulas such as bubble point pressure, dissolved gas-oil ratio, crude oil volume coefficient, crude oil density, crude oil viscosity, and crude oil compression coefficient. Design expert knowledge base system, it is based on the calculation methods of these physical parameters. A computational fluid property parameter model is constructed by training production log sample data. Finally, the interactive and friendly product interpretation software model was developed in 9 wells’ data. The design calculation model can increase the accuracy to achieve 95% of oil fluid property parameter. Accurately calculate fluid property parameter values.

INCREASING SENSITIVITY OF EDDY CURRENT NON-DESTRUCTIVE TESTING OF DELAMINATION IN CARBON-FIBER REINFORCED PLASTICS

2021 ◽  
pp. 28-37
Author(s):  
P. N. Shkatov ◽  
G. A. Didin ◽  
A. A. Ermolaev
Keyword(s):  
Carbon Fiber ◽  
Eddy Current ◽  
Calculation Model ◽  
Fiber Reinforced ◽  
Destructive Testing ◽  
Carbon Fiber Reinforced Plastics ◽  
Reinforced Plastics ◽  
Fiber Reinforced Plastics ◽  
Carbon Fiber Reinforced ◽  
The Difference

The paper is concerned with increasing sensitivity of eddy current nondestructive testing of most dangerous delamination in carbon-fiber reinforced plastics (CFRP). Increased sensitivity is achieved by separate registration and comparison of eddy current signals obtained from a set of stratifications of carbon fibers with the same orientation. The separation of eddy current signals is possible due to pronounced anisotropy of the electrical conductivity of the layers dominant in the direction of the fibers of the corresponding layer. Eddy-current signals are registered by eddy current probes with maximum sensitivity in a given angular direction. Prior to the scan eddy current signals of the probe are leveled on a defect-free area. The influence of the working gap on the difference between the eddy current signals of the probe is suppressed by normalizing it according to one of the signals. The analysis of the registered signals from delamination has been performed using an approximate calculation model. The reliability of the obtained results has been confirmed by comparison with experimental results and calculations using the finite element method.

scholarly journals High-Accuracy Calibration Based on Linearity Adjustment for Eddy Current Displacement Sensor

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2842 ◽  
Author(s):  
Wei Liu ◽  
Bing Liang ◽  
Zhenyuan Jia ◽  
Di Feng ◽  
Xintong Jiang ◽  
...  
Keyword(s):  
Eddy Current ◽  
Measurement Accuracy ◽  
Characteristic Curve ◽  
Calibration Method ◽  
High Accuracy ◽  
Output Characteristic ◽  
Displacement Sensor ◽  
Support Vector ◽  
Displacement Sensors ◽  
Calibration Accuracy

High precision position control is essential in the process of parts manufacturing and assembling, where eddy current displacement sensors (ECDSs) are widely used owing to the advantages of non-contact sensing, compact volume, and resistance to harsh conditions. To solve the nonlinear characteristics of the sensors, a high-accuracy calibration method based on linearity adjustment is proposed for ECDSs in this paper, which markedly improves the calibration accuracy and then the measurement accuracy. After matching the displacement value and the output voltage of the sensors, firstly, the sensitivity is adjusted according to the specified output range. Then, the weighted support vector adjustment models with the optimal weight of the zero-scale, mid-scale and full-scale are established respectively to cyclically adjust the linearity of the output characteristic curve. Finally, the final linearity adjustment model is obtained, and both the calibration accuracy and precision are verified by the established calibration system. Experimental results show that the linearity of the output characteristic curve of ECDS adjusted by the calibration method reaches over 99.9%, increasing by 1.9–5.0% more than the one of the original. In addition, the measurement accuracy improves from 11–25 μ m to 1–10 μ m in the range of 6mm, which provides a reliable guarantee for high accuracy displacement measurement.

Eddy Current Loss and Shielding Research of the Tank in Power Transformer

2012 ◽  
Vol 468-471 ◽  
pp. 1086-1089 ◽  
Author(s):  
Yong Ming Xu ◽  
Chao Du ◽  
Da Wei Meng
Keyword(s):  
Magnetic Field ◽  
Eddy Current ◽  
Power Transformer ◽  
Element Model ◽  
Eddy Current Loss ◽  
Calculation Model ◽  
Ultrahigh Pressure ◽  
Tank Wall ◽  
Current Loss ◽  
Leakage Magnetic Field

The problem about the eddy current loss which is caused by leakage magnetic field in ultrahigh pressure large capacity power transformer is becoming more extrusive. It is very significant to research the power transformer leakage magnetic field and eddy current loss on the tank wall thoroughly and accurately. 3D finite element model of power transformer leakage magnetic field and eddy current loss is established in this paper, the eddy current loss on the tank wall is calculated and the distribution is analyzed. For the eddy current loss could be reduced by magnetic shielding, new calculation model are established respectively, then eddy current loss on tank wall could be got with shielding. The best size and location of the shielding could be analyzed after changing the height of the shielding, which provided the important evidence to reduce tank wall eddy current loss effectively. The calculating methods have been proved to be accuracy after experiment.

Sign in / Sign up

Export Citation Format

Share Document