scholarly journals Localization of Biobotic Insects Using Low-Cost Inertial Measurement Units

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4486
Author(s):  
Jeremy Cole ◽  
Alper Bozkurt ◽  
Edgar Lobaton
Keyword(s):  
Disaster Response ◽  
Inertial Measurement Unit ◽  
Optimization Problem ◽  
Low Cost ◽  
Boundary Value ◽  
Measurement Unit ◽  
Navigation Problem ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Gromphadorhina Portentosa

Disaster robotics is a growing field that is concerned with the design and development of robots for disaster response and disaster recovery. These robots assist first responders by performing tasks that are impractical or impossible for humans. Unfortunately, current disaster robots usually lack the maneuverability to efficiently traverse these areas, which often necessitate extreme navigational capabilities, such as centimeter-scale clearance. Recent work has shown that it is possible to control the locomotion of insects such as the Madagascar hissing cockroach (Gromphadorhina portentosa) through bioelectrical stimulation of their neuro-mechanical system. This provides access to a novel agent that can traverse areas that are inaccessible to traditional robots. In this paper, we present a data-driven inertial navigation system that is capable of localizing cockroaches in areas where GPS is not available. We pose the navigation problem as a two-point boundary-value problem where the goal is to reconstruct a cockroach’s trajectory between the starting and ending states, which are assumed to be known. We validated our technique using nine trials that were conducted in a circular arena using a biobotic agent equipped with a thorax-mounted, low-cost inertial measurement unit. Results show that we can achieve centimeter-level accuracy. This is accomplished by estimating the cockroach’s velocity—using regression models that have been trained to estimate the speed and heading from the inertial signals themselves—and solving an optimization problem so that the boundary-value constraints are satisfied.

scholarly journals Accuracy and Repeatability of Spatiotemporal Gait Parameters Measured with an Inertial Measurement Unit

2021 ◽  
Vol 10 (9) ◽  
pp. 1804
Author(s):  
Jorge Posada-Ordax ◽  
Julia Cosin-Matamoros ◽  
Marta Elena Losa-Iglesias ◽  
Ricardo Becerro-de-Bengoa-Vallejo ◽  
Laura Esteban-Gonzalo ◽  
...  
Keyword(s):  
Healthy Subjects ◽  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
High Speeds ◽  
Controlled Conditions ◽  
Gait Parameters ◽  
Measurement Units ◽  
Accuracy And Repeatability

In recent years, interest in finding alternatives for the evaluation of mobility has increased. Inertial measurement units (IMUs) stand out for their portability, size, and low price. The objective of this study was to examine the accuracy and repeatability of a commercially available IMU under controlled conditions in healthy subjects. A total of 36 subjects, including 17 males and 19 females were analyzed with a Wiva Science IMU in a corridor test while walking for 10 m and in a threadmill at 1.6 km/h, 2.4 km/h, 3.2 km/h, 4 km/h, and 4.8 km/h for one minute. We found no difference when we compared the variables at 4 km/h and 4.8 km/h. However, we found greater differences and errors at 1.6 km/h, 2.4 km/h and 3.2 km/h, and the latter one (1.6 km/h) generated more error. The main conclusion is that the Wiva Science IMU is reliable at high speeds but loses reliability at low speeds.

Systematic Calibration Method for FOG Inertial Measurement Units

2013 ◽  
Vol 662 ◽  
pp. 717-720 ◽  
Author(s):  
Zhen Yu Zheng ◽  
Yan Bin Gao ◽  
Kun Peng He
Keyword(s):  
Inertial Measurement Unit ◽  
Inertial Sensors ◽  
Calibration Method ◽  
State Equation ◽  
Measurement Unit ◽  
Observation System ◽  
Body Frame ◽  
Inertial Measurement ◽  
Measurement Units ◽  
Error Coefficients

As an inertial sensors assembly, the FOG inertial measurement unit (FIMU) must be calibrated before being used. The paper presents a one-time systematic IMU calibration method only using two-axis low precision turntable. First, the detail error model of inertial sensors using defined body frame is established. Then, only velocity taken as observation, system 33 state equation is established including the lever arm effects and nonlinear terms of scale factor error. The turntable experiments verify that the method can identify all the error coefficients of FIMU on low-precision two-axis turntable, after calibration the accuracy of navigation is improved.

Maximum Correntropy Kalman Filter for Orientation Estimation With Application to LiDAR Inertial Odometry

2020 ◽  
Author(s):  
Seyed Fakoorian ◽  
Matteo Palieri ◽  
Angel Santamaria-Navarro ◽  
Cataldo Guaragnella ◽  
Dan Simon ◽  
...  
Keyword(s):  
Kalman Filtering ◽  
Inertial Measurement Unit ◽  
Low Cost ◽  
Attitude Estimation ◽  
High Rate ◽  
Measurement Unit ◽  
Orientation Estimation ◽  
Localization Accuracy ◽  
Inertial Measurement ◽  
Robotic Applications

Abstract Accurate attitude estimation using low-cost sensors is an important capability to enable many robotic applications. In this paper, we present a method based on the concept of correntropy in Kalman filtering to estimate the 3D orientation of a rigid body using a low-cost inertial measurement unit (IMU). We then leverage the proposed attitude estimation framework to develop a LiDAR-Intertial Odometry (LIO) demonstrating improved localization accuracy with respect to traditional methods. This is of particular importance when the robot undergoes high-rate motions that typically exacerbate the issues associated with low-cost sensors. The proposed orientation estimation approach is first validated using the data coming from a low-cost IMU sensor. We further demonstrate the performance of the proposed LIO solution in a simulated robotic cave exploration scenario.

An inertial measurement unit tracking system for body movement in comparison with optical tracking

2020 ◽  
Vol 234 (7) ◽  
pp. 728-737
Author(s):  
Rui Li ◽  
Barclay Jumet ◽  
Hongliang Ren ◽  
WenZhan Song ◽  
Zion Tsz Ho Tse
Keyword(s):  
Inertial Measurement Unit ◽  
Tracking System ◽  
Low Cost ◽  
Optical Tracking ◽  
Measurement Unit ◽  
Joint Movement ◽  
Joint Angles ◽  
Optical Tracking System ◽  
Microelectromechanical System ◽  
Inertial Measurement

The recent advancement of motion tracking technology offers better treatment tools for conditions, such as movement disorders, as the outcome of the rehabilitation could be quantitatively defined. The accurate and fast angular information output of the inertial measurement unit tracking systems enables the collection of accurate kinematic data for clinical assessment. This article presents a study of a low-cost microelectromechanical system inertial measurement unit-based tracking system in comparison with the conventional optical tracking system. The system consists of seven microelectromechanical system inertial measurement units, which could be mounted on the lower limbs of the subjects. For the feasibility test, 10 human participants were instructed to perform three different motions: walking, running, and fencing lunges when wearing specially designed sleeves. The subjects’ lower body movements were tracked using our inertial measurement unit-based system and compared with the gold standard—the NDI Polaris Vega optical tracking system. The results of the angular comparison between the inertial measurement unit and the NDI Polaris Vega optical tracking system were as follows: the average cross-correlation value was 0.85, the mean difference of joint angles was 2.00°, and the standard deviation of joint angles was ± 2.65°. The developed microelectromechanical system–based tracking system provides an alternative low-cost solution to track joint movement. Moreover, it is able to operate on an Android platform and could potentially be used to assist outdoor or home-based rehabilitation.

scholarly journals Feasibility Study of Multi Inertial Measurement Unit

Proceedings ◽  
2019 ◽  
Vol 42 (1) ◽  
pp. 74 ◽  
Author(s):  
Ariel Larey ◽  
Eliel Aknin ◽  
Itzik Klein
Keyword(s):  
Inertial Measurement Unit ◽  
Inertial Sensors ◽  
Low Cost ◽  
Software Tool ◽  
Experimental Results ◽  
Measurement Unit ◽  
Outlier Rejection ◽  
Inertial Measurement ◽  
Navigation Solution ◽  
Sensory Data

An inertial measurement unit (IMU) typically has three accelerometers and three gyroscopes. The output of those inertial sensors is used by an inertial navigation system to calculate the navigation solution–position, velocity and attitude. Since the sensor measurements contain noise, the navigation solution drifts over time. When considering low cost sensors, multiple IMUs can be used to improve the performance of a single unit. In this paper, we describe our designed 32 multi-IMU (MIMU) architecture and present experimental results using this system. To analyze the sensory data, a dedicated software tool, capable of addressing MIMUs inputs, was developed. Using the MIMU hardware and software tool we examined and evaluated the MIMUs for: (1) navigation solution accuracy (2) sensor outlier rejection (3) stationary calibration performance (4) coarse alignment accuracy and (5) the effect of different MIMUs locations in the architecture. Our experimental results show that 32 IMUs obtained better performance than a single IMU for all testcases examined. In addition, we show that performance was improved gradually as the number of IMUs was increased in the architecture.

Sign in / Sign up

Export Citation Format

Share Document