scholarly journals An Enhanced Plastic Optical Fiber-Based Surface Plasmon Resonance Sensor with a Double-Sided Polished Structure

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1516
Author(s):  
Lian Liu ◽  
Shijie Deng ◽  
Jie Zheng ◽  
Libo Yuan ◽  
Hongchang Deng ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Low Cost ◽  
Fiber Axis ◽  
Plastic Optical Fiber ◽  
Au Film ◽  
Spr Sensor ◽  
Resonance Sensor

An enhanced plastic optical fiber (POF)-based surface plasmon resonance (SPR) sensor is proposed by employing a double-sided polished structure. The sensor is fabricated by polishing two sides of the POF symmetrically along with the fiber axis, and a layer of Au film is deposited on each side of the polished region. The SPR can be excited on both polished surfaces with Au film coating, and the number of light reflections will be increased by using this structure. The simulation and experimental results show that the proposed sensor has an enhanced SPR effect. The visibility and full width at half maximum (FWHM) of spectrum can be improved for the high measured refractive index (RI). A sensitivity of 4284.8 nm/RIU is obtained for the double-sided POF-based SPR sensor when the measured liquid RI is 1.42. The proposed SPR sensor is easy fabrication and low cost, which can provide a larger measurement range and action area to the measured samples, and it has potential application prospects in the oil industry and biochemical sensing fields.

scholarly journals Microstructured Surface Plasmon Resonance Sensor Based on Inkjet 3D Printing Using Photocurable Resins with Tailored Refractive Index

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2518
Author(s):  
Nunzio Cennamo ◽  
Lorena Saitta ◽  
Claudio Tosto ◽  
Francesco Arcadio ◽  
Luigi Zeni ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
3D Printing ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Optical Sensor ◽  
Low Cost ◽  
3D Print ◽  
Spr Sensor ◽  
Resonance Sensor ◽  
3D Printed

In this work, a novel approach to realize a plasmonic sensor is presented. The proposed optical sensor device is designed, manufactured, and experimentally tested. Two photo-curable resins are used to 3D print a surface plasmon resonance (SPR) sensor. Both numerical and experimental analyses are presented in the paper. The numerical and experimental results confirm that the 3D printed SPR sensor presents performances, in term of figure of merit (FOM), very similar to other SPR sensors made using plastic optical fibers (POFs). For the 3D printed sensor, the measured FOM is 13.6 versus 13.4 for the SPR-POF configuration. The cost analysis shows that the 3D printed SPR sensor can be manufactured at low cost (∼15 €) that is competitive with traditional sensors. The approach presented here allows to realize an innovative SPR sensor showing low-cost, 3D-printing manufacturing free design and the feasibility to be integrated with other optical devices on the same plastic planar support, thus opening undisclosed future for the optical sensor systems.

Numerical Investigation of the Microstructured Optical Fiber-Based Surface Plasmon Resonance Sensor with Silver Nanolayer

2013 ◽  
Vol 411-414 ◽  
pp. 1573-1576 ◽  
Author(s):  
Nan Nan Luan ◽  
Jian Quan Yao ◽  
Ran Wang ◽  
Cong Jing Hao ◽  
Bao Qun Wu ◽  
...  
Keyword(s):  
Refractive Index ◽  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Silver Layer ◽  
Spr Sensor ◽  
Microstructured Optical Fiber ◽  
Sensor Structure ◽  
Resonance Sensor

The surface plasmon resonance (SPR) sensor is proposed based on coating the inner surfaces of an index-guiding microstructured optical fiber (MOF) with a silver layer. Fiber core is surrounded by six large metallized holes which should facilitate the fabrication of the layered sensor structure and the infiltration of the analyte. The relationship between the sensitivity of SPR sensor and the refractive index of MOF material is demonstrated with finite element method (FEM). Numerical simulation results indicate that the sensitivity of SPR sensor decreases as the refractive index of the MOF material increasing and both spectral and intensity sensitivity are estimated to be 6.25×10-5and 6.67×10-5with low refractive index of MOF materialn=1.46.

scholarly journals Sensitivity Enhancement of a Surface Plasmon Resonance Sensor with Platinum Diselenide

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 131 ◽  
Author(s):  
Yue Jia ◽  
Zhongfu Li ◽  
Haiqi Wang ◽  
Muhammad Saeed ◽  
Houzhi Cai
Keyword(s):  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Biochemical Sensors ◽  
2D Material ◽  
Au Film ◽  
Spr Sensor ◽  
Resonance Sensor ◽  
Sensor Properties ◽  
Index Unit

The extraordinary optoelectronic properties of platinum diselenide (PtSe2), whose structure is similar to graphene and phosphorene, has attracted great attention in new rapidly developed two-dimensional (2D) materials beyond the other 2D material family members. We have investigated the surface plasmon resonance (SPR) sensors through PtSe2 with the transfer matrix method. The simulation results show that the anticipated PtSe2 biochemical sensors have the ability to detect analytic. It is evident that only the sensitivities of Ag or Au film biochemical sensors were observed at 118°/RIU (refractive index unit) and 130°/RIU, whereas the sensitivities of the PtSe2-based biochemical sensors reached as high as 162°/RIU (Ag film) and 165°/RIU (Au film). The diverse biosensor sensitivities with PtSe2 suggest that this kind of 2D material can adapt SPR sensor properties.

scholarly journals Low cost plastic optical fiber sensor based on surface plasmon resonance

2010 ◽  
Author(s):  
Víctor M. Muñoz-Berti ◽  
Ana C. López-Pérez ◽  
Benito Alén ◽  
José Luis Costa-Krämer ◽  
Antonio García-Martín ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Low Cost ◽  
Optical Fiber Sensor ◽  
Fiber Sensor ◽  
Plastic Optical Fiber

scholarly journals Design and validation of fiber optic localized surface plasmon resonance sensor for thyroglobulin immunoassay with high sensitivity and rapid detection

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hyeong-Min Kim ◽  
Dae Hong Jeong ◽  
Ho-Young Lee ◽  
Jae-Hyoung Park ◽  
Seung-Ki Lee
Keyword(s):  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Localized Surface Plasmon Resonance ◽  
Optical Fiber Sensor ◽  
Fiber Sensor ◽  
Localized Surface Plasmon ◽  
Simple Method ◽  
Resonance Sensor

AbstractA simple optical fiber sensor based on localized surface plasmon resonance was constructed for direct and rapid measurement of thyroglobulin (Tg). Specific tests for Tg in patients that have undergone thyroidectomy are limited because of insufficient sensitivity, complicated procedures, and in some cases, a long time to yield a result. A sensitive, fast, and simple method is necessary to relieve the psychological and physical burden of the patient. Various concentrations of Tg were measured in a microfluidic channel using an optical fiber sensor with gold nanoparticles. The sensor chip has a detection limit of 93.11 fg/mL with no specificity for other antigens. The potential applicability of the Tg sensing system was evaluated using arbitrary samples containing specific concentrations of Tg. Finally, the sensor can be employed to detect Tg in the patient’s serum, with a good correlation when compared with the commercial kit.

Construction aspects of a plastic optical fiber-based surface plasmon resonance biochip

2015 ◽  
Author(s):  
M. F. S. Santiago ◽  
T. B. Silva ◽  
M. H. Mozzini ◽  
I. B. G. Coutinho ◽  
E. S. Medeiros ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
Optical Fiber ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Plastic Optical Fiber

scholarly journals Cellulose and Vanadium Plasmonic Sensor to Measure Ni2+ Ions

2021 ◽  
Vol 11 (7) ◽  
pp. 2963
Author(s):  
Nur Alia Sheh Omar ◽  
Yap Wing Fen ◽  
Irmawati Ramli ◽  
Umi Zulaikha Mohd Azmi ◽  
Hazwani Suhaila Hashim ◽  
...  
Keyword(s):  
Thin Film ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Signal To Noise Ratio ◽  
Affinity Constant ◽  
Detection Accuracy ◽  
Plasmonic Sensor ◽  
Spr Sensor ◽  
Resonance Sensor

A novel vanadium–cellulose composite thin film-based on angular interrogation surface plasmon resonance (SPR) sensor for ppb-level detection of Ni(II) ion was developed. Experimental results show that the sensor has a linear response to the Ni(II) ion concentrations in the range of 2–50 ppb with a determination coefficient (R2) of 0.9910. This SPR sensor can attain a maximum sensitivity (0.068° ppb−1), binding affinity constant (1.819 × 106 M−1), detection accuracy (0.3034 degree−1), and signal-to-noise-ratio (0.0276) for Ni(II) ion detection. The optical properties of thin-film targeting Ni(II) ions in different concentrations were obtained by fitting the SPR reflectance curves using the WinSpall program. All in all, the proposed Au/MPA/V–CNCs–CTA thin-film-based surface plasmon resonance sensor exhibits better sensing performance than the previous film-based sensor and demonstrates a wide and promising technology candidate for environmental monitoring applications in the future.

Sign in / Sign up

Export Citation Format

Share Document