scholarly journals Convolutional Neural Network for Drowsiness Detection Using EEG Signals

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1734
Author(s):  
Siwar Chaabene ◽  
Bassem Bouaziz ◽  
Amal Boudaya ◽  
Anita Hökelmann ◽  
Achraf Ammar ◽  
...  
Keyword(s):  
Neural Network ◽  
Data Acquisition ◽  
Convolutional Neural Network ◽  
Data Augmentation ◽  
Model Analysis ◽  
Biomedical Signal Processing ◽  
Eeg Signals ◽  
Drowsiness Detection ◽  
Active Research ◽  
Key Steps

Drowsiness detection (DD) has become a relevant area of active research in biomedical signal processing. Recently, various deep learning (DL) researches based on the EEG signals have been proposed to detect fatigue conditions. The research presented in this paper proposes an EEG classification system for DD based on DL networks. However, the proposed DD system is mainly realized into two procedures; (i) data acquisition and (ii) model analysis. For the data acquisition procedure, two key steps are considered, which are the signal collection using a wearable Emotiv EPOC+ headset to record 14 channels of EEG, and the signal annotation. Furthermore, a data augmentation (DA) step has been added to the proposed system to overcome the problem of over-fitting and to improve accuracy. As regards the model analysis, a comparative study is also introduced in this paper to argue the choice of DL architecture and frameworks used in our DD system. In this sense, The proposed DD protocol makes use of a convolutional neural network (CNN) architecture implemented using the Keras library. The results showed a high accuracy value (90.42%) in drowsy/awake discrimination and revealed the efficiency of the proposed DD system compared to other research works.

A novel convolutional neural network method for subject-independent driver drowsiness detection based on single-channel data and EEG alpha spindles

2021 ◽  
pp. 095441192110178
Author(s):  
Sara Houshmand ◽  
Reza Kazemi ◽  
Hamed Salmanzadeh
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Driving Simulator ◽  
Single Channel ◽  
Reference Method ◽  
Eeg Signals ◽  
Drowsiness Detection ◽  
Driver Drowsiness ◽  
Driving Scenario ◽  
Eeg Alpha

A significant number of fatal accidents are caused by drowsy drivers worldwide. Driver drowsiness detection based on electroencephalography (EEG) signals has high accuracy and is known as a reference method for evaluating drowsiness. Among brain waves, EEG alpha spindle activity is a silent feature of decreasing alertness levels. In this paper, based on the detection of EEG alpha spindles, a novel driver drowsiness detection method is presented. The EEG spindles were detected using Continuous Wavelet Transform (CWT) analysis and the Morlet function. To do so, the signal is divided into 30-s epochs, and the observer rating of drowsiness determines the drowsiness level in each epoch. Tests were conducted on 17 healthy males in a driving simulator with a monotonous driving scenario. The Convolutional Neural Network (CNN) is used for classifying EEG signals and automatically learns features of the early drowsy state. The subject-independent classification results for single-channel P4 show 94% accuracy.

scholarly journals Morphological residual convolutional neural network (M-RCNN) for intelligent recognition of wear particles from artificial joints

Friction ◽  
2021 ◽  
Author(s):  
Xiaobin Hu ◽  
Jian Song ◽  
Zhenhua Liao ◽  
Yuhong Liu ◽  
Jian Gao ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Data Augmentation ◽  
Support Vector ◽  
Wear Particles ◽  
Artificial Joints ◽  
Performance Deterioration ◽  
Overall Performance ◽  
Correct Category ◽  
Intelligent Recognition

AbstractFinding the correct category of wear particles is important to understand the tribological behavior. However, manual identification is tedious and time-consuming. We here propose an automatic morphological residual convolutional neural network (M-RCNN), exploiting the residual knowledge and morphological priors between various particle types. We also employ data augmentation to prevent performance deterioration caused by the extremely imbalanced problem of class distribution. Experimental results indicate that our morphological priors are distinguishable and beneficial to largely boosting overall performance. M-RCNN demonstrates a much higher accuracy (0.940) than the deep residual network (0.845) and support vector machine (0.821). This work provides an effective solution for automatically identifying wear particles and can be a powerful tool to further analyze the failure mechanisms of artificial joints.

scholarly journals Validating Deep Neural Networks for Online Decoding of Motor Imagery Movements from EEG Signals

Sensors ◽  
2019 ◽  
Vol 19 (1) ◽  
pp. 210 ◽  
Author(s):  
Zied Tayeb ◽  
Juri Fedjaev ◽  
Nejla Ghaboosi ◽  
Christoph Richter ◽  
Lukas Everding ◽  
...  
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Motor Imagery ◽  
Classification Performance ◽  
Feature Engineering ◽  
Learning Models ◽  
Eeg Signals ◽  
Learning Methods

Non-invasive, electroencephalography (EEG)-based brain-computer interfaces (BCIs) on motor imagery movements translate the subject’s motor intention into control signals through classifying the EEG patterns caused by different imagination tasks, e.g., hand movements. This type of BCI has been widely studied and used as an alternative mode of communication and environmental control for disabled patients, such as those suffering from a brainstem stroke or a spinal cord injury (SCI). Notwithstanding the success of traditional machine learning methods in classifying EEG signals, these methods still rely on hand-crafted features. The extraction of such features is a difficult task due to the high non-stationarity of EEG signals, which is a major cause by the stagnating progress in classification performance. Remarkable advances in deep learning methods allow end-to-end learning without any feature engineering, which could benefit BCI motor imagery applications. We developed three deep learning models: (1) A long short-term memory (LSTM); (2) a spectrogram-based convolutional neural network model (CNN); and (3) a recurrent convolutional neural network (RCNN), for decoding motor imagery movements directly from raw EEG signals without (any manual) feature engineering. Results were evaluated on our own publicly available, EEG data collected from 20 subjects and on an existing dataset known as 2b EEG dataset from “BCI Competition IV”. Overall, better classification performance was achieved with deep learning models compared to state-of-the art machine learning techniques, which could chart a route ahead for developing new robust techniques for EEG signal decoding. We underpin this point by demonstrating the successful real-time control of a robotic arm using our CNN based BCI.

Performance Evaluation of Convolutional Neural Network Using Synthetic Medical Data Augmentation Generated by GAN

2021 ◽  
Author(s):  
Ramesh Adhikari ◽  
Suresh Pokharel
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Convolutional Neural Network ◽  
Data Augmentation ◽  
Medical Diagnostics ◽  
Generative Adversarial Networks ◽  
Generalization Capability ◽  
X Ray ◽  
Original Dataset ◽  
Unseen Data

Data augmentation is widely used in image processing and pattern recognition problems in order to increase the richness in diversity of available data. It is commonly used to improve the classification accuracy of images when the available datasets are limited. Deep learning approaches have demonstrated an immense breakthrough in medical diagnostics over the last decade. A significant amount of datasets are needed for the effective training of deep neural networks. The appropriate use of data augmentation techniques prevents the model from over-fitting and thus increases the generalization capability of the network while testing afterward on unseen data. However, it remains a huge challenge to obtain such a large dataset from rare diseases in the medical field. This study presents the synthetic data augmentation technique using Generative Adversarial Networks to evaluate the generalization capability of neural networks using existing data more effectively. In this research, the convolutional neural network (CNN) model is used to classify the X-ray images of the human chest in both normal and pneumonia conditions; then, the synthetic images of the X-ray from the available dataset are generated by using the deep convolutional generative adversarial network (DCGAN) model. Finally, the CNN model is trained again with the original dataset and augmented data generated using the DCGAN model. The classification performance of the CNN model is improved by 3.2% when the augmented data were used along with the originally available dataset.

Sign in / Sign up

Export Citation Format

Share Document