scholarly journals Proposed ANFIS Based Approach for Fault Tracking, Detection, Clearing and Rearrangement for Photovoltaic System

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2269
Author(s):  
Ahmed F. Bendary ◽  
Almoataz Y. Abdelaziz ◽  
Mohamed M. Ismail ◽  
Karar Mahmoud ◽  
Matti Lehtonen ◽  
...  

In the last few decades, photovoltaics have contributed deeply to electric power networks due to their economic and technical benefits. Typically, photovoltaic systems are widely used and implemented in many fields like electric vehicles, homes, and satellites. One of the biggest problems that face the relatability and stability of the electrical power system is the loss of one of the photovoltaic modules. In other words, fault detection methods designed for photovoltaic systems are required to not only diagnose but also clear such undesirable faults to improve the reliability and efficiency of solar farms. Accordingly, the loss of any module leads to a decrease in the efficiency of the overall system. To avoid this issue, this paper proposes an optimum solution for fault finding, tracking, and clearing in an effective manner. Specifically, this proposed approach is done by developing one of the most promising techniques of artificial intelligence called the adaptive neuro-fuzzy inference system. The proposed fault detection approach is based on associating the actual measured values of current and voltage with respect to the trained historical values for this parameter while considering the ambient changes in conditions including irradiation and temperature. Two adaptive neuro-fuzzy inference system-based controllers are proposed: (1) the first one is utilized to detect the faulted string and (2) the other one is utilized for detecting the exact faulted group in the photovoltaic array. The utilized model was installed using a configuration of 4 × 4 photovoltaic arrays that are connected through several switches, besides four ammeters and four voltmeters. This study is implemented using MATLAB/Simulink and the simulation results are presented to show the validity of the proposed technique. The simulation results demonstrate the innovation of this study while proving the effective and high performance of the proposed adaptive neuro-fuzzy inference system-based approach in fault tracking, detection, clearing, and rearrangement for practical photovoltaic systems.

2017 ◽  
Vol 9 (8) ◽  
pp. 1399 ◽  
Author(s):  
A. Bassam ◽  
O. May Tzuc ◽  
M. Escalante Soberanis ◽  
L. Ricalde ◽  
B. Cruz

Author(s):  
B. Samanta

A study is presented to show the performance of machine fault detection using adaptive neuro-fuzzy inference system (ANFIS) and genetic algorithms (GAs), termed here as GA-ANFIS. The time domain vibration signals of a rotating machine with normal and defective gears are processed for feature extraction. The extracted features from original and preprocessed signals are used as inputs to GA-ANFIS for two class (normal or fault) recognition. The number and the parameters of membership functions used in ANFIS along with the features are selected using GAs maximizing the classification success. The results of fault detection are compared with GA based artificial neural network (ANN), termed here as GA-ANN. In GA-ANN, the number of hidden nodes and the selection of input features are optimized using GAs. For each trial, the GA-ANFIS and GA-ANN are trained with a subset of the experimental data for known machine conditions. The trained GA-ANFIS and GA-ANN are tested using the remaining set of data. The procedure is illustrated using the experimental vibration data of a gearbox. The results compare the effectiveness of both types of classifiers (ANFIS and ANN) with GA based selection of features and classifier parameters.


2018 ◽  
Vol 4 (2) ◽  
pp. 305 ◽  
Author(s):  
D. Hamidian ◽  
J. Salajegheh ◽  
E. Salajegheh

This paper presents a technique for irregular plate and regular dam damage detection based on combination of wavelet with adoptive neuro fuzzy inference system (ANFIS). Many damage detection methods need response of structures (such as the displacements, stresses or mode shapes) before and after damage, but this method only requires response of structures after damage, otherwise many damage detection methods study regular plate but this method also studies irregular plate. First, the structure (irregular plate or regular dam) is modelled by using ANSYS software, the model is analysed and structure’s responses with damage are obtained by finite element approach. Second, the responses at the finite element points with regular distances are obtained by using ANFIS. The damage zone is represented as the elements with reduced elasticity modules. Then these responses of structures are analysed with 2D wavelet transform. It is shown that matrix detail coefficients of 2D wavelet transform can specified the damage zone of plates and regular dams by perturbation in the damaged area.


Sign in / Sign up

Export Citation Format

Share Document