scholarly journals High-Precision Automatic Calibration Modeling of Point Light Source Tracking Systems

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2270
Author(s):  
Ruijin Li ◽  
Liming Zhang ◽  
Xianhua Wang ◽  
Weiwei Xu ◽  
Xin Li ◽  
...  

To realize high-precision and high-frequency unattended site calibration and detection of satellites, automatic direction adjustment must be implemented in mirror arrays. This paper proposes a high-precision automatic calibration model based on a novel point light source tracking system for mirror arrays. A camera automatically observes the solar vector, and an observation equation coupling the image space and local coordinate systems is established. High-precision calibration of the system is realized through geometric error calculation of multipoint observation data. Moreover, model error analysis and solar tracking verification experiments are conducted. The standard deviations of the pitch angle and azimuth angle errors are 0.0176° and 0.0305°, respectively. The root mean square errors of the image centroid contrast are 2.0995 and 0.8689 pixels along the x- and y-axes, respectively. The corresponding pixel angular resolution errors are 0.0377° and 0.0144°, and the comprehensive angle resolution error is 0.0403°. The calculated model values are consistent with the measured data, validating the model. The proposed point light source tracking system can satisfy the requirements of high-resolution, high-precision, high-frequency on-orbit satellite radiometric calibration and modulation transfer function detection.

2013 ◽  
Vol 380-384 ◽  
pp. 609-612
Author(s):  
Pei Chao Dong ◽  
Hong Ke Xu ◽  
Shan Lin

Base on the fuzzy reasoning technology and digital signal processor technology, this paper designs a DSP-based point light source fuzzy tracking system, which can be used to improve the efficiency of solar panels. By analysis characteristics of the system and summing up the experience, it gave a set of fuzzy control rules, and determined some important control parameters. It uses the DSP as the core of the system control unit to ensure the real-time and stability. Simulation and experiments results show the system has a good performance.


2019 ◽  
Vol 39 (11) ◽  
pp. 1128001
Author(s):  
李瑞金 Li Ruijin ◽  
张黎明 Zhang Liming ◽  
徐伟伟 Xu Weiwei ◽  
司孝龙 Si Xiaolong ◽  
李佳伟 Li Jiawei ◽  
...  

2018 ◽  
Vol 38 (5) ◽  
pp. 0528004
Author(s):  
冯浩 Feng Hao ◽  
张黎明 Zhang Liming ◽  
李佳伟 Li Jiawei ◽  
徐伟伟 Xu Weiwei ◽  
陈洪耀 Chen Hongyao

Author(s):  
P.M. Houpt ◽  
A. Draaijer

In confocal microscopy, the object is scanned by the coinciding focal points (confocal) of a point light source and a point detector both focused on a certain plane in the object. Only light coming from the focal point is detected and, even more important, out-of-focus light is rejected.This makes it possible to slice up optically the ‘volume of interest’ in the object by moving it axially while scanning the focused point light source (X-Y) laterally. The successive confocal sections can be stored in a computer and used to reconstruct the object in a 3D image display.The instrument described is able to scan the object laterally with an Ar ion laser (488 nm) at video rates. The image of one confocal section of an object can be displayed within 40 milliseconds (1000 х 1000 pixels). The time to record the total information within the ‘volume of interest’ normally depends on the number of slices needed to cover it, but rarely exceeds a few seconds.


2020 ◽  
Vol 128 (7) ◽  
pp. 1889-1912
Author(s):  
Hiroaki Santo ◽  
Michael Waechter ◽  
Wen-Yan Lin ◽  
Yusuke Sugano ◽  
Yasuyuki Matsushita

1981 ◽  
Vol 52 (4) ◽  
pp. 624-625
Author(s):  
Harold E. Edgerton ◽  
Vernon E. MacRoberts

Sign in / Sign up

Export Citation Format

Share Document