scholarly journals Eco-Efficient Analysis of a Refurbishment Proposal for a Social Housing

2020 ◽  
Vol 12 (17) ◽  
pp. 6725 ◽  
Author(s):  
Pilar Mercader-Moyano ◽  
Paula M. Esquivias ◽  
Radu Muntean
Keyword(s):  
Environmental Impact ◽  
Circular Economy ◽  
Social Housing ◽  
Life Cycle Analysis ◽  
Life Stages ◽  
Building Sector ◽  
Building Stock ◽  
Environmental Product Declaration ◽  
Integral Assessment ◽  
Indoor Comfort

In recent years, the building sector has been turning towards intervening in the existing city building stock. In fact, it is generally accepted that the refurbishment of buildings based on sustainability must form the axis of reformulation of the building sector. Although energy refurbishment is commonly accepted and recommended towards decarbonization of the building stock, an integral assessment towards implementing the principles of the circular economy must incorporate the environmental impact of the materials in order to get an eco-efficient refurbishment. The article presents the environmental analysis of a social housing located in Cadiz (Spain) and the improvements achieved by its refurbishment. This intervention is improved by incorporating eco-efficient materials based on the environmental and life cycle analysis (LCA). Those analyses are performed using EnergyPlus, Radiance, LCA standards, and Environmental Product Declaration of the products. The results shown that although an energy rehabilitation intervention can fulfil other eco-efficient aspects, an integral assessment should always be carried out in order to ensure that indoor comfort is achieved, daylighting and solar heat gains are balanced, and the environmental impact at product, use, and end-of-life stages of a building is minimized. Considering the constrains and limitations of the tools and databases, higher efforts should be done to solve them and provide useful resources for a decarbonized and circular building stock.

scholarly journals Life Cycle Analysis of a Game-Based Solution for Domestic Energy Saving

2020 ◽  
Vol 12 (17) ◽  
pp. 6699
Author(s):  
Marta Gangolells ◽  
Miquel Casals ◽  
Núria Forcada ◽  
Marcel Macarulla
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Energy Saving ◽  
Resource Availability ◽  
Social Housing ◽  
Life Cycle Analysis ◽  
Comprehensive Analysis ◽  
Horizon 2020 ◽  
Domestic Energy ◽  
The Eu

ICT-based solutions are seen to be almost totally environmentally friendly, but game-based solutions for energy saving have not been explored yet. This paper describes a comprehensive analysis and an in-depth interpretation of the life cycle environmental impact of a game-based solution for domestic energy saving, developed and validated within the EU-funded Horizon 2020 project EnerGAware—Energy Game for Awareness of energy efficiency in social housing communities. Life cycle impacts were calculated with SimaPRO 8.5.2.0 using the ReCiPe 2016 v1.02 midpoint and endpoint methods and information contained within the Ecoinvent v3.4 database. Although the pre-competitive solution, directly arising from the research project, was found to have a relatively high environmental impact, its future exploitation, which mostly relies on existing infrastructure, was found to be highly competitive from an environmental perspective. The game will help reduce the life cycle impact of domestic energy consumption on damage to human health (3.68%), ecosystem quality (3.87%), and resource availability (4.81%). Most of the environmental impact of the market solution was found in the manufacturing phase (77.96–80.12%). Transport (8.86–7.57%), use (3.86–5.82%), and maintenance (7.24–7.54%) phases were found to contribute little to environmental impact. This research provides a useful reference for decision-making as it contributes to the environmental benchmarking of competing energy-saving strategies.

scholarly journals Decarbonization and Circular Economy in the Sustainable Development and Renovation of Buildings and Neighbourhoods

2020 ◽  
Vol 12 (19) ◽  
pp. 7914 ◽  
Author(s):  
Pilar Mercader-Moyano ◽  
Paula M. Esquivias
Keyword(s):  
Circular Economy ◽  
Construction Materials ◽  
Sustainable Urban Development ◽  
Construction Sector ◽  
Building Sector ◽  
Building Stock ◽  
The Sustainable Development ◽  
Greenhouse Emissions ◽  
Efficient Construction ◽  
Whole Life Cycle

In recent years, the building sector has been turning towards intervening in the existing city building stock. In fact, it is generally accepted that the refurbishment of buildings and the urban regeneration based on sustainability must form the axis of reformulation of the building sector. Nowadays, achieving sustainable urban development inevitably involves improving existing buildings, thereby preventing the need for city growth, and for the emptying of established neighbourhoods. Furthermore, considering the whole life cycle, it is well known the great amount of greenhouse emissions derived from the construction sector, so in order to reach a decarbonized society it is important to provide eco-efficient construction materials and solutions, adding the principles of circular economy and resource efficiency. The articles of this special issue show different aspects to be considered in order to reach a decarbonized and circular building stock.

scholarly journals Circular Building Design: An Analysis of Barriers and Drivers for a Circular Building Sector

Buildings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 77 ◽  
Author(s):  
Jouri Kanters
Keyword(s):  
Environmental Impact ◽  
Natural Resources ◽  
Circular Economy ◽  
Building Materials ◽  
Building Design ◽  
Building Industry ◽  
Structured Interviews ◽  
Building Sector ◽  
Main Driver ◽  
Political Priority

Circular building design could significantly reduce the environmental impact of buildings and the pressure on natural resources. However, most buildings today are not designed according to the principles of the circular economy. Most literature has focused on either methods for quantifying the lifecycle analysis of buildings and materials, or on innovative circular building materials, but not much is known about the design process of circular buildings and how architects are dealing with translating the principles of the circular economy to the building sector. A series of semi-structured interviews with architects and consultants that have engaged in circular building design has been conducted to identify the barriers and drivers of the transformation towards a circular building sector. Interviews were analysed using qualitative coding analysis. The conservativeness of the building industry, the lack of political priority and the dependency throughout the building industry were found to be the main barriers, while a supportive client with a well-defined assignment and idea was considered to be the main driver. The contribution of this paper to key actors in the building sector is to identify the main barriers and drivers for a circular building sector.

scholarly journals Environmental Impact Associated with the Supply Chain and Production of Biodiesel from Jatropha curcas L. through Life Cycle Analysis

2018 ◽  
Vol 10 (5) ◽  
pp. 1451 ◽  
Author(s):  
Mario Giraldi-Díaz ◽  
Lorena De Medina-Salas ◽  
Eduardo Castillo-González ◽  
Max De la Cruz-Benavides
Keyword(s):  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Jatropha Curcas ◽  
Life Cycle Analysis ◽  
Jatropha Curcas L

scholarly journals Methodology for the quantification of concrete sustainability

2018 ◽  
Vol 174 ◽  
pp. 01006 ◽  
Author(s):  
Břetislav Teplý ◽  
Tomáš Vymazal ◽  
Pavla Rovnaníková
Keyword(s):  
Decision Making ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Service Life ◽  
Circular Economy ◽  
Point Of View ◽  
Raw Material ◽  
Load Bearing Capacity ◽  
Sustainability Management

Efficient sustainability management requires the use of tools which allow material, technological and construction variants to be quantified, measured or compared. These tools can be used as a powerful marketing aid and as support for the transition to “circular economy”. Life Cycle Assessment (LCA) procedures are also used, aside from other approaches. LCA is a method that evaluates the life cycle of a structure from the point of view of its impact on the environment. Consideration is given also to energy and raw material costs, as well as to environmental impact throughout the life cycle - e.g. due to emissions. The paper focuses on the quantification of sustainability connected with the use of various types of concrete with regard to their resistance to degradation. Sustainability coefficients are determined using information regarding service life and "eco-costs". The aim is to propose a suitable methodology which can simplify decision-making in the design and choice of concrete mixes from a wider perspective, i.e. not only with regard to load-bearing capacity or durability.

scholarly journals Three eco-tool comparison with the example of the environmental performance of domestic solar flat plate hot water systems

2013 ◽  
Vol 9 (2) ◽  
pp. 174-181
Keyword(s):  
Environmental Impact ◽  
Environmental Performance ◽  
Life Cycle Analysis ◽  
Hot Water ◽  
International Standards ◽  
Huge Amount ◽  
Product Lca ◽  
Lca Practitioners ◽  
Standards And Guidelines

Life Cycle Analysis (LCA) is a procedure used as an analytical tool for the evaluation of the environmental impact caused by a material, a manufacturing process or product. For an end product, LCA requires both the identification and quantification of materials and energy used in all stages of the product’s life, together with their environmental impact. It requires therefore a huge amount of data about materials, components, manufacturing processes, energy consumption and the relevant environmental impacts. For this reason, a number of software and databases have been developed, in order to facilitate LCA users. These are the so-called Eco-Tools, used in an effort to minimize the environmental impact of a product from the materials and the energy used for production. In this paper, LCA is conducted for solar thermosyphonic systems, with the aid of three commercially available Eco-Tools, usually used by LCA practitioners, namely: Eco-It, GEMIS and SimaPro, and the results are compared. Although all three tools claim accordance with the international standards and guidelines, differences do exist. A typical solar thermosyphonic system (DSHWS) with a 4 m2 collector area and a capacity of 150 dm3 that covers the hot water needs of a three person family in Thessaloniki is used as case study. The results of the three tools are compared for each component of the solar system as well as for each material used and for the conventional energy substituted by the system.

scholarly journals Energy Rehabilitation of Social Housing in Vulnerable Areas. Case study: a 1950s Building in a Medium-sized Mediterranean City

2019 ◽  
Vol 4 (1) ◽  
pp. 44
Author(s):  
Ruá María José ◽  
Huedo Patricia ◽  
Cabeza Manuel ◽  
Saez Beatriz ◽  
Civera Vicente
Keyword(s):  
Low Income ◽  
Social Housing ◽  
Urban Areas ◽  
Optimal Solution ◽  
Energy Performance ◽  
Urban Context ◽  
Building Stock ◽  
Performance Simulation ◽  
Urban Level

In the urban context, buildings play a key role as they are energy consumers. In well-established cities with a high percentage of aged building stock, the focus should lie on sensitive urban areas where the weakest population sectors and the worst physico-economic conditions are usually encountered. In this work, the energy refurbishment of social housing is proposed. A block of municipally owned buildings is selected as a case study to consider that public buildings play an exemplary role according to Directive 2012/27/EU. The group is formed by 12 buildings, which account for 120 dwellings.This study is grounded on two levels. First the urban level. The building is located in a prioritised urban Area of Rehabilitation, Renovation and Urban Regeneration (ARRU), according to the new local Land Plan. This area presents multidimensional vulnerability and considers urban, building, socio-demographic and socio-economic features. Second, the building presents very low energy performance. It was built in 1959 when a high demand of dwellings and the economic resources then available led to low-quality buildings that are far from meeting today’s standards.Some proposals are made, having in mind the specific features of the urban context. The energy refurbishment of the building is proposed, selecting the optimal solution, considering technical, environmental and economic criteria. The energy performance simulation shows a remarkable improvement of the energy performance, resulting in an improvement of the thermal comfort of the dwellers. Besides, a reduction in the energy consumption is reached, which would reduce the energy bills and, on the other hand, a reduction of the carbon emissions to the atmosphere, contributing to a better environment quality. Having in mind that the building is intended for social housing, energy poverty situations could be avoided, as dwellings are inhabited by low-income dwellers.

scholarly journals The requalification of industrial buildings: a circular economy perspective

2021 ◽  
pp. 159-169
Author(s):  
Agata Maniero ◽  
Giorgia Fattori
Keyword(s):  
Reinforced Concrete ◽  
Circular Economy ◽  
Real Case ◽  
Building Stock ◽  
Industrial Buildings

Since the 1970s, in Europe the industrial decommissioning phenomenon has led to the generation of an obsolescent and widespread building stock, located in highly strategic areas. This paper, aiming to make abandoned industrial buildings re-enter the market, focused on the development of prefabricated housing modules, according to the nested-building renovation approach. The project started from the constraint’s typological analysis (architectural, functional and structural) of 900 reinforced concrete industrial buildings in view of the intervention replicability. Finally, to validate the design and technological choices, the analysed system was applied to a real case study in Verona: the Greggi Warehouse (1960) in the “ex-Manifattura Tabacchi” factory area.

scholarly journals Bloques de Tierra Comprimida (BTC) estabilizados con cal y cemento. Evaluación de su impacto ambiental y su resistencia a compresión

2020 ◽  
Vol 10 (2) ◽  
pp. 70-81
Author(s):  
Santiago Pedro Cabrera ◽  
Yolanda Guadalupe Aranda-Jiménez ◽  
Edgardo Jonathan Suárez-Domínguez ◽  
Rodolfo Rotondaro
Keyword(s):  
Compressive Strength ◽  
Environmental Impact ◽  
Portland Cement ◽  
Life Cycle Analysis ◽  
Negative Impact ◽  
Santa Fe ◽  
Compressed Earth Blocks ◽  
Earth Blocks ◽  
Negative Environmental Impact ◽  
The City

This work presents the evaluation of the environmental impact and compressive strength of Compressed Earth Blocks (CEB) stabilized with hydrated aerial lime and Portland cement. For this, 12 series of blocks stabilized with different proportions of lime and cement were manufactured and the Life Cycle Analysis (LCA) methodology was used. After conducting these assays and simulations, it could be concluded that, using earth and sand typical of the city of Santa Fe (Argentina), stabilized with certain percentages of Portland cement between 5 and 10% in weight, CEB can be produced with sufficient levels of strength for them to be used in load-bearing walls, in this way minimizing the negative environmental impact associated with their manufacturing. It is also concluded that the stabilization with aerial lime does not increase the CEB’s compressive strength and, on the contrary, significantly increases their negative impact on the environment.

scholarly journals Mass Timber Envelopes in Passivhaus Buildings: Designing for Moisture Safety in Hot and Humid Australian Climates

Buildings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 478
Author(s):  
Marcus Strang ◽  
Paola Leardini ◽  
Arianna Brambilla ◽  
Eugenia Gasparri
Keyword(s):  
Best Practice ◽  
Management Practices ◽  
Building Stock ◽  
Combined Application ◽  
Hot And Humid Climates ◽  
Stormwater Management Practices ◽  
Wall Assembly ◽  
Mass Timber ◽  
Climate Crisis ◽  
Indoor Comfort

The uptake of buildings employing cross-laminated timber (CLT) assemblies and designed to Passivhaus standard has accelerated internationally over the past two decades due to several factors including responses to the climate crisis by decarbonising the building stock. Structural CLT technology and the Passivhaus certification both show measurable benefits in reducing energy consumption, while contributing to durability and indoor comfort. However, there is a general lack of evidence to support a fast uptake of these technologies in Australia. This paper responds to the compelling need of providing quantitative data and adoption strategies; it explores their combined application as a potential pathway for climate-appropriate design of energy-efficient and durable mass timber envelope solutions for subtropical and tropical Australian climates. Hygrothermal risk assessments of interstitial condensation and mould growth of CLT wall assemblies inform best-practice design of mass timber buildings in hot and humid climates. This research found that the durability of mass timber buildings located in hot and humid climates may benefit from implementing the Passivhaus standard to manage interior conditions. The findings also suggested that climate-specific design of the wall assembly is critical for mass timber buildings, in conjunction with excellent stormwater management practices during construction and corrosion protection for metallic fasteners.

Sign in / Sign up

Export Citation Format

Share Document