scholarly journals Impact of Demand Response on Reliability Enhancement in Distribution Networks

2021 ◽  
Vol 13 (23) ◽  
pp. 13201
Author(s):  
Mohammad Reza Mansouri ◽  
Mohsen Simab ◽  
Bahman Bahmani Firouzi
Keyword(s):  
Demand Response ◽  
Electricity Market ◽  
Distribution System ◽  
Distribution Systems ◽  
Market Price ◽  
Distribution Networks ◽  
Optimal Operation ◽  
Mixed Integer ◽  
Reliability Indices ◽  
Operation Costs

This paper presents an innovative instantaneous pricing scheme for optimal operation and improved reliability for distribution systems (DS). The purpose of the proposed program is to maximize the operator’s expected profit under various risk-taking conditions, such that the customers pay the minimum cost to supply energy. Using the previous information of the energy consumption for each customer, a customer baseline load (CBL) is defined; the energy price for consumption costs higher and lower than this level would be different. The proposed scheme calculates the difference between the baseline load and the consumption curve with the electricity market price instead of calculating the total consumption of the customers with the unstable price of the electricity market, which is uncertain. In the proposed tariff, the developed cost and load models are included in the distribution system operation problem, and the objective function is modeled as a mixed integer linear programming (MILP) problem. Also, the effect of demand response (DR) and elasticity on the load curve, the final profit of the distribution system operator, and payment risk and operation costs are examined. Since there are various uncertainties in the smart distribution grid, the calculations being time-consuming and volumetric is important in the evaluation of reliability indices. Thus, when computation volume can be decreased and computation speed can be increased, analytical reliability analysis methods can be used, as they were in the present work. Finally, the changes in the reliability indices were calculated for the ratio of the customers’ sensitivity to the price and the customers’ participation in the proposed tariff using an analytical method based on Monte Carlo simulation (MCS). The results showed the efficiency of the proposed method in increasing the operator profit, reducing the operation costs, and enhancing the reliability indices.

scholarly journals Modelling of Distributed Resource Aggregation for the Provision of Ancillary Services

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4598
Author(s):  
Adam Lesniak ◽  
Dawid Chudy ◽  
Rafal Dzikowski
Keyword(s):  
Power System ◽  
Distribution System ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Optimal Operation ◽  
Ancillary Services ◽  
Mixed Integer ◽  
Large Power ◽  
Operation Pattern ◽  
Point Of Common Coupling

Nowadays, ancillary services (ASs) are usually provided by large power generating units located in transmission networks, while smaller assets connected to distribution systems remain passive. It is expected that active distribution systems will start to play an important role due to numerous issues related to power system operation caused mainly by developing renewable generation and restrictions imposed on conventional power generating units by climate policies. The future development of the power system management will also lead to the establishment of new market agents such as distributed resource aggregators (DRAs). The article presents the concept of the DRA as part of an active distribution system enabling small resources to participate in wholesale markets, provide ASs and indicates the functions of the DRA coordinator in the modern power system. The proposed method of the DRA structure modelling with the use of the mixed-integer linear programming (MILP) is aimed at evaluating the optimal operation pattern of participating resources, the desired shape of the load profile at the point of common coupling (PCC) and the AS provision. The performed simulations of the DRA’s operation show that various types of aggregated resources located in distribution networks are able to provide different services effectively to support the power system in terms of load–generation balancing and allow for further development of renewables.

scholarly journals Reliability worth Assessment of Active Distribution System Considering Protective Devices and Multiple Distributed Generation Units

2018 ◽  
Vol 7 (2) ◽  
pp. 111
Author(s):  
Subramanya Sarma S ◽  
V. Madhusudhan ◽  
V. Ganesh
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Distribution Systems ◽  
Renewable Energy Sources ◽  
Distribution Networks ◽  
Research Area ◽  
Test System ◽  
Primary Concern ◽  
Reliability Indices ◽  
New Research

<p>Reliability worth assessment is a primary concern in planning and designing of electrical distribution systems those operate in an economic manner with minimal interruption of electric supply to customer loads. Renewable energy sources (RES) based Distributed Generation (DG) units can be forecasted to penetrate in distribution networks due to advancement in their technology. The assessment of reliability worth of DG enhanced distribution networks is a relatively new research area. This paper proposes a methodology that can be used to analyze the reliability of active distribution systems (DG enhanced distribution system) and can be applied in preliminary planning studies to compute the reliability indices and statistics. The reliability assessment in this work is carried out with analytical approach applied on a test system and simulated results validate that installation of distributed generators can improve the distribution system reliability considerably.</p>

scholarly journals Optimal Network Reconfiguration in Active Distribution Networks with Soft Open Points and Distributed Generation

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4172 ◽  
Author(s):  
Ibrahim Diaaeldin ◽  
Shady Abdel Aleem ◽  
Ahmed El-Rafei ◽  
Almoataz Abdelaziz ◽  
Ahmed F. Zobaa
Keyword(s):  
Distributed Generation ◽  
Distribution System ◽  
Distribution Systems ◽  
Search Algorithm ◽  
Distribution Networks ◽  
Mixed Integer ◽  
Network Reconfiguration ◽  
Efficient Manner ◽  
Optimal Network ◽  
Network Losses

In this study, we allocated soft open points (SOPs) and distributed generation (DG) units simultaneously with and without network reconfiguration (NR), and investigate the contribution of SOP losses to the total active losses, as well as the effect of increasing the number of SOPs connected to distribution systems under different loading conditions. A recent meta-heuristic optimization algorithm called the discrete-continuous hyper-spherical search algorithm is used to solve the mixed-integer nonlinear problem of SOPs and DGs allocation, along with new NR methodology to obtain radial configurations in an efficient manner without the possibility of getting trapped in local minima. Further, multi-scenario studies are conducted on an IEEE 33-node balanced benchmark distribution system and an 83-node balanced distribution system from a power company in Taiwan. The contributions of SOP losses to the total active losses, as well as the effect of increasing the number of SOPs connected to the system, are investigated to determine the real benefits gained from their allocation. It was clear from the results obtained that simultaneous NR, SOP, and DG allocation into a distribution system creates a hybrid configuration that merges the benefits offered by radial distribution systems and mitigates drawbacks related to losses, power quality, and voltage violations, while offering a far more efficient and optimal network operation. Also, it was found that the contribution of the internal loss of SOPs to the total loss for different numbers of installed SOPs is not dependent on the number of SOPs and that loss minimization is not always guaranteed by installing more SOPs or DGs along with NR. One of the findings of the paper demonstrates that NR with optimizing tie-lines could reduce active losses considerably. The results obtained also validate, with proper justifications, that SOPs installed for the management of constraints in LV feeders could further reduce losses and efficiently address issues related to voltage violations and network losses.

scholarly journals Optimal Operation of the Campus Microgrid considering the Resource Uncertainty and Demand Response Schemes

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Hafiz Abd ul Muqeet ◽  
Hafiz Mudassir Munir ◽  
Aftab Ahmad ◽  
Intisar Ali Sajjad ◽  
Guang-Jun Jiang ◽  
...  
Keyword(s):  
Power Systems ◽  
Demand Response ◽  
Solar Irradiance ◽  
Distribution System ◽  
Energy Demand ◽  
Mathematical Problem ◽  
Optimal Solution ◽  
Optimal Operation ◽  
Mixed Integer ◽  
Proposed Model

Present power systems face problems such as rising energy charges and greenhouse gas (GHG) releases. These problems may be assuaged by participating distributed generators (DGs) and demand response (DR) policies in the distribution system (DS). The main focus of this paper is to propose an energy management system (EMS) approach for campus microgrid (µG). For this purpose, a Pakistani university has been investigated and an optimal solution has been proposed. Conventionally, it contains electricity from the national grid only as a supply to fulfil the energy demand. Under the proposed setup, it contains campus owned nondispatchable DGs such as solar photovoltaic (PV) panels and microturbines (MTs) as dispatchable sources. To overcome the random nature of solar irradiance, station battery has been integrated as energy storage. The subsequent nonlinear mathematical problem has been scheduled by mixed-integer nonlinear programming (MINLP) in MATLAB for saving energy cost and battery aging cost. The framework has been validated under deterministic and stochastic environments. Among random parameters, solar irradiance and load have been taken into consideration. Case studies have been carried out considering the demand response strategies to analyze the proposed model. The obtained results show that optimal management and scheduling of storage in the presence of DGs mutually benefit by minimizing consumption cost (customer) and grid load (utility) which show the efficacy of the proposed model. The results obtained are compared to the existing literature and a significant cost reduction is found.

scholarly journals A hybrid algorithm for voltage stability enhancement of distribution systems

2022 ◽  
Vol 12 (1) ◽  
pp. 50
Author(s):  
Hazim Sadeq Mohsin Al-Wazni ◽  
Shatha Suhbat Abdulla Al-Kubragyi
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Hybrid Algorithm ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Distribution Networks ◽  
Optimal Operation ◽  
Total Power ◽  
Optimal Size ◽  
Voltage Profile

This paper presents a hybrid algorithm by applying a hybrid firefly and particle swarm optimization algorithm (HFPSO) to determine the optimal sizing of distributed generation (DG) and distribution static compensator (D-STATCOM) device. A multi-objective function is employed to enhance the voltage stability, voltage profile, and minimize the total power loss of the radial distribution system (RDS). Firstly, the voltage stability index (VSI) is applied to locate the optimal location of DG and D-STATCOM respectively. Secondly, to overcome the sup-optimal operation of existing algorithms, the HFPSO algorithm is utilized to determine the optimal size of both DG and D-STATCOM. Verification of the proposed algorithm has achieved on the standard IEEE 33-bus and Iraqi 65-bus radial distribution systems through simulation using MATLAB. Comprehensive simulation results of four different cases show that the proposed HFPSO demonstrates significant improvements over other existing algorithms in supporting voltage stability and loss reduction in distribution networks. Furthermore, comparisons have achieved to demonstrate the superiority of HFPSO algorithms over other techniques due to its ability to determine the global optimum solution by easy way and speed converge feature.

scholarly journals Multi-period Market Operation of Transmission-Distribution Systems Based on Heterogeneous Decomposition and Coordination

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3126 ◽  
Author(s):  
Cong Liu ◽  
Jingyang Zhou ◽  
Yi Pan ◽  
Zhiyi Li ◽  
Yifei Wang ◽  
...  
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Iteration Process ◽  
Optimal Operation ◽  
Mixed Integer ◽  
Master Problem ◽  
Wholesale Market ◽  
Operation Modes ◽  
Decomposition And Coordination ◽  
Market Framework

The integration of shiftable/curtailment distribution generators (DGs) along with quick-response storage has not only increased the transaction’s flexibility but also puzzled the bidding willingness of transmission-connected market players (TMPs). In this paper, the method of heterogeneous decomposition and coordination (HGDC) is applied to decompose the integrated transmission-distribution market framework into a bi-level problem with a transmission wholesale market master problem and several distribution retail market subproblems in a decentralized organization structure. The price-based bidding willingness of demand-side resources’ (DSRs’) aggregator is simulated considering the relation between distribution system operator’s (DSO’s) operation modes and its equivalent market transactive price. Besides the traditional mixed-integer linear programming (MILP) model, the active reconfiguration model of DSOs based on mixed-integer second-order conic programming (MI-SOCP) is proposed to rearrange its operation switch status and elaborate its operation cost according to the market transaction. Multi-period optimal operation modes could be obtained through an HGDC-based iteration process by coordinating the transmission system operator (TSO) with DSOs and considering the market energy equilibrium and reserve requirements for security considerations. Karush-Kuhn-Tucker (KKT) conditions are used to testify the optimality and convergence of the bi-level model in theory. The T5-3D33 case is employed to illustrate the efficiency of the proposed model and method.

scholarly journals Optimization of Distribution System Reliability

2016 ◽  
Vol 1 (3) ◽  
Author(s):  
Laila Zemite ◽  
Janis Gerhards ◽  
Mihails Gorobecs ◽  
Anatolijs Ļevčenkovs
Keyword(s):  
System Reliability ◽  
Distribution System ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Calculation Algorithm ◽  
Reliability Indices ◽  
Power Switches ◽  
Special Concern ◽  
Distribution System Reliability ◽  
Improve Reliability

Reliability analysis of distribution systems has been attracting increasing attention. A special concern pertains to the distribution networks on which most failures occurs. The optimization of distribution system of breakers and power switches is a possible strategy to improve reliability. The paper describes development procedure for modelling restoring after a fault and calculating associated reliability indices and customers’ outage costs. The developed model of the network and reliability and outage costs calculating algorithm is suitable for multi-criteria analysis of the network. Proposed reliability and outage costs calculation algorithm is based on Monte Carlo simulation and genetic algorithm.

scholarly journals Optimal Sizing and Placement of Capacitor Banks in Distribution Networks Using a Genetic Algorithm

Electricity ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 187-204
Author(s):  
Gian Giuseppe Soma
Keyword(s):  
Genetic Algorithm ◽  
Electricity Market ◽  
Distribution Systems ◽  
Reactive Power ◽  
Electricity Consumption ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Capacitor Banks ◽  
Control Pattern ◽  
Definition Of

Nowadays, response to electricity consumption growth is mainly supported by efficiency; therefore, this is the new main goal in the development of electric distribution networks, which must fully comply with the system’s constraints. In recent decades, the issue of independent reactive power services, including the optimal placement of capacitors in the grid due to the restructuring of the electricity industry and the creation of a competitive electricity market, has received attention from related companies. In this context, a genetic algorithm is proposed for optimal planning of capacitor banks. A case study derived from a real network, considering the application of suitable daily profiles for loads and generators, to obtain a better representation of the electrical conditions, is discussed in the present paper. The results confirmed that some placement solutions can be obtained with a good compromise between costs and benefits; the adopted benefits are energy losses and power factor infringements, taking into account the network technical limits. The feasibility and effectiveness of the proposed algorithm for optimal placement and sizing of capacitor banks in distribution systems, with the definition of a suitable control pattern, have been proved.

Multi-objective optimization of optimal capacitor allocation in radial distribution systems

2020 ◽  
Vol 21 (3) ◽  
Author(s):  
Sayed Mir Shah Danish ◽  
Mikaeel Ahmadi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu ◽  
Narayanan Krishna ◽  
...  
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Reactive Power ◽  
Stability Index ◽  
Distribution Networks ◽  
Optimization Method ◽  
Optimal Size ◽  
Multi Objective Optimization ◽  
Multi Objective

AbstractThe optimal size and location of the compensator in the distribution system play a significant role in minimizing the energy loss and the cost of reactive power compensation. This article introduces an efficient heuristic-based approach to assign static shunt capacitors along radial distribution networks using multi-objective optimization method. A new objective function different from literature is adapted to enhance the overall system voltage stability index, minimize power loss, and to achieve maximum net yearly savings. However, the capacitor sizes are assumed as discrete known variables, which are to be placed on the buses such that it reduces the losses of the distribution system to a minimum. Load sensitive factor (LSF) has been used to predict the most effective buses as the best place for installing compensator devices. IEEE 34-bus and 118-bus test distribution systems are utilized to validate and demonstrate the applicability of the proposed method. The simulation results obtained are compared with previous methods reported in the literature and found to be encouraging.

Sign in / Sign up

Export Citation Format

Share Document