scholarly journals Optimal Operation of Cascade Reservoirs for Flood Control of Multiple Areas Downstream: A Case Study in the Upper Yangtze River Basin

Water ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 1250 ◽  
Author(s):  
Chao Zhou ◽  
Na Sun ◽  
Lu Chen ◽  
Yi Ding ◽  
Jianzhong Zhou ◽  
...  

The purpose of a flood control reservoir operation is to prevent flood damage downstream of the reservoir and the safety of the reservoir itself. When a single reservoir cannot provide enough storage capacity for certain flood control points downstream, cascade reservoirs should be operated together to protect these areas from flooding. In this study, for efficient use of the reservoir storage, an optimal flood control operation model of cascade reservoirs for certain flood control points downstream was proposed. In the proposed model, the upstream reservoirs with the optimal operation strategy were considered to reduce the inflow of the reservoir downstream. For a large river basin, the flood routing and time-lag cannot be neglected. So, dynamic programming (DP) combined with the progressive optimality algorithm (POA) method, DP-POA, was proposed. Thus, the innovation of this study is to propose a two-stage optimal reservoir operation model with a DP-POA algorithm to solve the problem of optimal co-operation of cascade reservoirs for multiple flood control points downstream during the flood season. The upper Yangtze River was selected as a case study. Three reservoirs from upstream to downstream, Xiluodu, Xiangjiaba and the Three Gorges reservoirs (TGR) in the upper Yangtze River, were taken into account. Results demonstrate that the two-stage optimization algorithm has a good performance in solving the cascade reservoirs optimization problem, because the inflow of reservoir downstream and the division volumes were largely reduced. After the optimal operation of Xiluodu and Xiangjiaba reservoirs, the average reduction of flood peak for all these 13 typical flood hydrographs (TFHs) is 13.6%. Meanwhile, the cascade reservoirs can also store much more storm water during a flood event, and the maximum volumes stored in those two reservoirs upstream in this study can reach 25.2 billion m3 during a flood event. Comprising the proposed method with the current operation method, results demonstrate that the flood diversion volumes at the flood control points along the river decrease significantly.

Water ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 41
Author(s):  
Gang Zha ◽  
Jianzhong Zhou ◽  
Xin Yang ◽  
Wei Fang ◽  
Ling Dai ◽  
...  

Flood disasters are the most frequent and most severe natural disasters in most countries around the world. Reservoir flood operation is an important method to reduce flood losses. When there are multiple reservoirs and flood control points in the basin, it is difficult to use reservoirs separately to fully realize their flood control potential. However, the multi-reservoir joint flood control operation is a multi-objective, multi-constrained, multi-dimensional, nonlinear, and strong-transition feature decision-making problem, and these characteristics make modeling and solving very difficult. Therefore, a large-scale reservoirs flood control operation modeling method is innovatively proposed, and Dynamic Programming (DP) combined with the Progressive Optimality Algorithm (POA) and Particle Swarm Optimization (PSO) methods, DP-POA-PSO, are designed to efficiently solve the optimal operation model. The middle and upper Yangtze River was chosen as a case study. Six key reservoirs in the basin were considered, including Xiluodu (XLD), Xiangjiaba (XJB), Pubugou (PBG), Tingzikou (TZK), Goupitan (GPT), and Three Gorges (TG). Studies have shown that DP-POA-PSO can effectively solve the optimal operation model. Compared with the current operation method, the joint flood control optimal operation makes the flood control point reach the flood control standard, moreover, in the event of the flood with a return period of 1000 years, Jingjiang, the most critical flood control point of the Yangtze River, does not require flood diversion, and the volume of flood diversion in Chenglingji is also greatly reduced.


2018 ◽  
Vol 18 (6) ◽  
pp. 2003-2014
Author(s):  
Zhiqiang Jiang ◽  
Hui Qin ◽  
Changming Ji ◽  
Wenjie Wu

Abstract Reservoir operation charts have been widely researched and applied to reservoir operation. However, these achievements are generally used for a single reservoir and have rarely been applied to cascade reservoirs. Considering the requirements of flood control and water supply, this paper studied the extraction and application of energy storage operation chart (ESOC) for cascade reservoirs. Steps in the methodology mainly include: (1) model building of cascade reservoirs operation optimization (CROO), (2) extracting ESOC based on discriminant coefficient method (DCM) and CROO model, (3) simulation operation of ESOC based on DCM, (4) choosing the optimal ESOC and verifying its efficiency through the results. Cascade reservoirs in the Yangtze River of China were selected for a case study. Compared with the conventional operation method, the simulation results show that the ESOC presents better performance in terms of power generation, guaranteed output and assurance rate. In detail, the annual power generation of ESOC can be increased by 0.9%, the total guaranteed output can be increased by 3.4% and the assurance rate can be increased by 9.6%, which indicates that the proposed ESOC method can greatly improve the hydropower energy efficiency and reliability of cascade reservoirs’ power supply.


Water ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1883
Author(s):  
Di Zhu ◽  
Yadong Mei ◽  
Xinfa Xu ◽  
Junhong Chen ◽  
Yue Ben

As more and more water projects are built on rivers, the flood control operation becomes more complex. Studies on the optimal flood control operation are very important to safeguard human life and property. This study focused on optimizing the operation of a complex flood control system composed of cascade reservoirs, navigation-power junctions, flood storage areas, and flood control points. An optimal model was established to jointly maximize flood peak reduction rates of downstream flood control points. A hybrid algorithm named the Dynamic Programming-Progressive Optimality Algorithm (DP-POA) was used to solve this model, and the middle and lower reaches of the Ganjiang River were selected as a case study. The results show that flood reduction at three downstream flood control points ranged from 1080 to 5359 m3/s for designed floods with different return periods, which increased by about 333~1498 m3/s in comparison with the conventional operation. Considering that the maximum water level of reservoirs using DP-POA and the conventional operation is the same, this indicated that DP-POA can make full use of the reservoirs’ flood control storage to reduce downstream flood peaks. In addition, the flood diversion volume of the flood storage area using DP-POA ranged from 0.33 × 108 to 1.79 × 108 m3 for designed floods with 200-year, 300-year, and 500-year return periods, which is smaller than that using the conventional operation.


Sign in / Sign up

Export Citation Format

Share Document