scholarly journals Visible Light Communication System for Offshore Wind Turbine Foundation Scour Early Warning Monitoring

Water ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1486 ◽  
Author(s):  
Yung-Bin Lin ◽  
Tzu-Kang Lin ◽  
Cheng-Chun Chang ◽  
Chang-Wei Huang ◽  
Ben-Ting Chen ◽  
...  
Keyword(s):  
Visible Light ◽  
Wind Turbine ◽  
Monitoring System ◽  
Wind Farms ◽  
Visible Light Communication ◽  
Offshore Structures ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Sea Waves ◽  
Scour Monitoring

Offshore wind farms have a superior wind source to terrestrial wind farms, but they also face more severe environmental conditions such as severe storms, typhoons, and sea waves. Scour leads to the excavation of sediments around the foundations of structures, reducing the safe capacity of the structures. The phenomenon of pier scour is extremely complex because of the combined effects of the vortex system involving time-dependent flow patterns and sediment transport mechanisms. A real-time scour monitoring system can improve the safety of structures and afford cost-effective operations by preventing premature or unnecessary maintenance. This paper proposes an on-site scour monitoring system using visible light communication (VLC) modules for offshore wind turbine installations. A flume experiment revealed that the system was highly sensitive and accurate in monitoring seabed scour processes. This arrayed-VLC sensory system, proposed in this paper, has considerable potential for safety monitoring and also can contribute to improving the accuracy of empirical scour formulas for sustainable maintenance in the life cycle of offshore structures.

scholarly journals Unsupervised Damage Detection for Offshore Jacket Wind Turbine Foundations Based on an Autoencoder Neural Network

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3333
Author(s):  
Maria del Cisne Feijóo ◽  
Yovana Zambrano ◽  
Yolanda Vidal ◽  
Christian Tutivén
Keyword(s):  
Neural Network ◽  
Wind Turbine ◽  
Environmental Conditions ◽  
Wind Farms ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Small Subset ◽  
Scaled Model ◽  
Vibration Data ◽  
Large Water

Structural health monitoring for offshore wind turbine foundations is paramount to the further development of offshore fixed wind farms. At present time there are a limited number of foundation designs, the jacket type being the preferred one in large water depths. In this work, a jacket-type foundation damage diagnosis strategy is stated. Normally, most or all the available data are of regular operation, thus methods that focus on the data leading to failures end up using only a small subset of the available data. Furthermore, when there is no historical precedent of a type of fault, those methods cannot be used. In addition, offshore wind turbines work under a wide variety of environmental conditions and regions of operation involving unknown input excitation given by the wind and waves. Taking into account the aforementioned difficulties, the stated strategy in this work is based on an autoencoder neural network model and its contribution is two-fold: (i) the proposed strategy is based only on healthy data, and (ii) it works under different operating and environmental conditions based only on the output vibration data gathered by accelerometer sensors. The proposed strategy has been tested through experimental laboratory tests on a scaled model.

Model Test and Numerical Analysis of an Offshore Bottom Fixed Pentapod Wind Turbine Under Seismic Loads

2016 ◽  
Author(s):  
Wenhua Wang ◽  
Zhen Gao ◽  
Xin Li ◽  
Torgeir Moan ◽  
Bin Wang
Keyword(s):  
Wind Turbine ◽  
Wind Wave ◽  
Seismic Analysis ◽  
Wind Farms ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Structural Dynamic ◽  
Load Conditions

In the last decade the wind energy industry has developed rapidly in China, especially offshore. For a water depth less than 20m, monopile and multi-pile substructures (tripod, pentapod) are applied widely in offshore wind farms. Some wind farms in China are located in high seismicity regions, thus, the earthquake load may become the dominant load for offshore wind turbines. This paper deals with the seismic behavior of an offshore wind turbine (OWT) consisting of the NREL 5MW baseline wind turbine, a pentapod substructure and a pile foundation of a real offshore wind turbine in China. A test model of the OWT is designed based on the hydro-elastic similarity. Test cases of different load combinations are performed with the environmental conditions generated by the Joint Earthquake, Wave and Current Simulation System and the Simple Wind Field Generation System at Dalian University of Technology, China, in order to investigate the structural dynamic responses under different load conditions. In the tests, a circular disk is used to model the rotor-nacelle system, and a force gauge is fixed at the center of the disk to measure the wind forces during the tests. A series of accelerometers are arranged along the model tower and the pentapod piles, and strain gauges glued on the substructure members are intended to measure the structural dynamic responses. A finite element model of the complete wind turbine is also established in order to compare the theoretical results with the test data. The hydro-elastic similarity is validated based on the comparison of the measured dynamic characteristics and the results of the prototype modal analysis. The numerical results agree well with the experimental data. Based on the comparisons of the results, the effect of the wind and sea loads on the structural responses subjected to seismic is demonstrated, especially the influence on the global response of the structure. It is seen that the effect of the combined seismic, wind, wave and current load conditions can not be simply superimposed. Hence the interaction effect in the seismic analysis should be considered when the wind, wave and current loads have a non-negligible effect.

Experimental Investigation on the Dynamic Response of a Three Legged Articulated Type Offshore Wind Tower

2016 ◽  
Author(s):  
Chinsu Mereena Joy ◽  
Anitha Joseph ◽  
Lalu Mangal
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Renewable Energy Sources ◽  
Offshore Structures ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Experimental Investigations ◽  
Offshore Wind Turbine ◽  
Ocean Engineering ◽  
Study Results

Demand for renewable energy sources is rapidly increasing since they are able to replace depleting fossil fuels and their capacity to act as a carbon neutral energy source. A substantial amount of such clean, renewable and reliable energy potential exists in offshore winds. The major engineering challenge in establishing an offshore wind energy facility is the design of a reliable and financially viable offshore support for the wind turbine tower. An economically feasible support for an offshore wind turbine is a compliant platform since it moves with wave forces and offer less resistance to them. Amongst the several compliant type offshore structures, articulated type is an innovative one. It is flexibly linked to the seafloor and can move along with the waves and restoring is achieved by large buoyancy force. This study focuses on the experimental investigations on the dynamic response of a three-legged articulated structure supporting a 5MW wind turbine. The experimental investigations are done on a 1: 60 scaled model in a 4m wide wave flume at the Department of Ocean Engineering, Indian Institute of Technology, Madras. The tests were conducted for regular waves of various wave periods and wave heights and for various orientations of the platform. The dynamic responses are presented in the form of Response Amplitude Operators (RAO). The study results revealed that the proposed articulated structure is technically feasible in supporting an offshore wind turbine because the natural frequencies are away from ocean wave frequencies and the RAOs obtained are relatively small.

The Current Situation and Recent Advances of Deep-Water Floating Wind Turbine

2012 ◽  
Vol 226-228 ◽  
pp. 772-775
Author(s):  
Yu Chen ◽  
Chun Li ◽  
Wei Gao ◽  
Jia Bin Nie
Keyword(s):  
Wind Turbine ◽  
Deep Water ◽  
Rapid Development ◽  
Coupled Model ◽  
Wind Farms ◽  
International Standards ◽  
Offshore Wind ◽  
Current Status ◽  
Offshore Wind Turbine ◽  
Floating Wind Turbine

Offshore wind turbine is a novel approach in the field of wind energy technology. With the rapid development of coastal wind farms, it is the trend to move them outward to deep-water district. However, the cost of construction rises significantly with the increase in water depth. Floating wind turbine is one of the efficient methods to solve this problem. The early history, current status and cutting-edge improvements of overseas offshore floating wind turbine as well as the shortcomings shall be presented. The concept designs, international standards, fully coupled model simulations and hydrodynamic experiments will be illustrated and discussed together with the development of the theory and the related software modules. Thus a novel researching method and concept shall be presented to provide reference for future researches

Guideline for Offshore Floating Wind Turbine Structures

2010 ◽  
Author(s):  
Knut O. Ronold ◽  
Vigleik L. Hansen ◽  
Marte Godvik ◽  
Einar Landet ◽  
Erik R. Jo̸rgensen ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farms ◽  
Oil And Gas Industry ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Technical Requirements ◽  
Floating Wind Turbine ◽  
Floating Offshore Wind Turbines ◽  
Offshore Floating Wind Turbine

Floating offshore wind turbines is a field undergoing major development. Several companies and research institutes worldwide are engaged in research programs, pilot projects and even planning of commercial floating wind farms. Developing standards for design of floating wind turbine structures and a framework for prevailing rules are crucial and necessary for the industry to continue to grow. Det Norske Veritas (DNV) is an international provider of offshore standards for both the oil and gas industry and the wind energy industry. The standard DNV-OS-J101 “Design of Offshore Wind Turbine Structures” provides principles, technical requirements and guidance for design, construction and in-service inspection of offshore wind turbine structures. As a first step towards updating this standard to fully cover floating wind turbine structures, a DNV Guideline for Offshore Floating Wind Turbines has been established. This development is based on identification of current floating wind turbine concepts and the guideline includes an evaluation of what is required to make DNV-OS-J101 suitable for floating wind turbine structures. This paper presents the highlights of the new DNV Guideline for Offshore Floating Wind Turbine Structures.

Model Experiment of a SPAR Type Offshore Wind Turbine in Storm Condition

2012 ◽  
Author(s):  
Kentaroh Kokubun ◽  
Shigesuke Ishida ◽  
Tadashi Nimura ◽  
Toshiki Chujo ◽  
Shigeo Yoshida ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Model Experiment ◽  
Wind Farms ◽  
Offshore Wind ◽  
Mooring Line ◽  
Offshore Wind Turbine ◽  
Ocean Engineering ◽  
Under Construction ◽  
Storm Condition ◽  
Sea Area

Wind power has the primary potential among renewable energies. Because Japan consists of little flat land and little shallow coast, floating wind turbine must be developed to make wind farms in Japan. Therefore, Japanese national demonstration project of Floating Offshore Wind Turbine (FOWT) was started in 2010FY by Ministry of the Environment and a SPAR-type FOWT is under construction at present. The floater is planned to be hybrid, consists of upper part by steal and lower part by pre-stressed concrete. Four fins are attached around the floater to suppress yaw motion. The floater is moored by three catenary chains. In order to confirm the safety of the FOWT in storm condition, experiments of a scale of 1/34.5 model were carried out at Ocean Engineering Basin of National Maritime Research Institute (NMRI), Japan. The draft of SPAR, the height of hub above sea level and the diameter of rotor of the model are 1.07m, 0.68m and 0.64m, respectively. In all experiments, blades are fixed to the hub under feathering condition and the hub is irrotational and fixed to the tower because this wind turbine is assumed to be under the storm condition, but wind blows transversely to the nacelle to give the maximum wind force. Water depth of the basin is smaller than the planned sea area on a reduced scale of model, therefore, springs and wires were used instead of chains in order to correspond to characteristics of horizontal mooring tension. Environmental forces are wind, wave and current in 50-year return period. Tensions of the 3 moorings and the motion of the model are measured in condition of wind and/or wave and/or current. Three kinds of direction of wind are adopted. One is the same direction as the wave and current, another is perpendicular to the wave and current, and the other is against to the wave and current. Besides the intact conditions a mooring-line-cut experiment in a storm condition was also conducted. Moreover, the effect of vortex induced motion (VIM), which occurs in current, was discussed. The results of the model experiment are reported to show the sufficient safety of this FOWT.

scholarly journals The advanced p-y method for analyzing the behaviour of large-diameter monopiles supporting offshore wind turbines

2020 ◽  
Vol 205 ◽  
pp. 12008
Author(s):  
William F Van Impe ◽  
Shin-Tower Wang
Keyword(s):  
Wind Turbine ◽  
Large Diameter ◽  
Offshore Structures ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Response Curves ◽  
Current Design ◽  
Jacket Structures ◽  
Load Tests ◽  
Offshore Industry

The analyses of monopile foundations have been heavily based on the p-y response curves (to represent lateral soil resistances) published by API RP 2GEO (2011) and DNV (2013), which are proven reliable and applicable for piles with smaller diameters that were normally used for jacket structures in the offshore industry. However, concerns have been raised about the validity of semi-empirical p-y criteria for large-diameter piles. Wind turbine monopiles have a significantly larger diameter and smaller length to diameter ratio than typical piles used for offshore structures. The ratio of the length to the diameter for a monopile typically is also significantly smaller than those used in the API load tests. Therefore, the response of a monopile may be more like a rigid rotation, with components of resistance mobilized at the tip and axially along the sides as it rotates. This behaviour is in contrast to long slender piles that respond to lateral loading in bending rather than rotation. The objective of this paper is to analyze the factors that may contribute to the apparent conservatism in the current design practice for large-diameter monopile foundations and to provide improved solutions on how to analyze and design the large-diameter monopiles for offshore wind turbine using the p-y method.

Sign in / Sign up

Export Citation Format

Share Document