Hot finished steel structural hollow sections

2019 ◽  
Keyword(s):  
Finished Steel

Tendencies of export and import of steel industry products of Russia within 9 months of 2019

2020 ◽  
Vol 76 (2) ◽  
pp. 107-112
Author(s):  
N. G. Zinov’eva
Keyword(s):  
Middle East ◽  
Steel Industry ◽  
Pig Iron ◽  
Finished Steel ◽  
Steel Pipes ◽  
Ferrous Metals ◽  
Steel Grades ◽  
Cis Countries ◽  
Further Development ◽  
Coated Sheet

Structure of the Russian export and import of steel industry products presented by results of 9 months of 2019 operation. It was shown, that the total share of pig iron, ferroalloys and semi-products (40.3%) in the ferrous metals export from Russia is practically the same as the share of rolled products and steel pipes (39.4%), whereas the shares in the import structure were 7.7 and 75% accordingly. The share the far abroad countries in the Russian export and import of finished steel products (in natural terms) accounted for 80.6 and 28.7% accordingly, while the share of CIS countries – 19.4 and 71.3% accordingly. For 9 months of 2019 the Russian export of semi-products declined by 10.9% comparing with the analogue period of 2018 and accounted for 10.9 m tons. 54.6% of the total export shipping of semi-products were directed to Mexico, Turkey, Egypt and Taiwan. Within the nearest years the Russian export of semi-products and billets, in particular, will be effected by the further development of the semi-products production in in the countries of Middle East, Turkey, Vietnam and India. The domestic market remained to be more attractive for many Russian companies. For the 9 months of 2019, export of long and flat products accounted for 3 and 5.7 m tons accordingly, declining comparing with the analogue period of the previous year by 11 and 15.6% accordingly. Import of long and flat products decreased by 12 and 0.5%, accounting for 1.0 and 2.9 m tons accordingly. By the results of 9 months of 2019, import declined and export shipping of coated sheet increased. Taking into account the expansion of steel grades assortment by Russian plants, increase of capacities for production of sheet with different coatings, this tendency is likely to remain.

LA-LED X

Alloy Digest ◽  
1970 ◽  
Vol 19 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Finished Steel ◽  
Screw Machine

Abstract LA-LFD X is a low-carbon, lead-bearing, free-machining, cold-finished steel containing small amounts of tellurium. It is recommended for automatic screw machine operations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-35. Producer or source: LaSalle Steel Company.

Hot finished steel structural hollow sections

2020 ◽  
Keyword(s):  
Finished Steel

scholarly journals Investigation of the Microstructural Evolution during Hot Stamping of a Carburized Complex Phase Steel by Laser-Ultrasonics

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1836
Author(s):  
Alexander Horn ◽  
Marion Merklein
Keyword(s):  
Microstructural Evolution ◽  
Hot Stamping ◽  
Laser Ultrasonics ◽  
Complex Phase ◽  
Finished Steel ◽  
Steel Sheets ◽  
Fine Grain ◽  
Martensitic Microstructure ◽  
Ultrasound Sensor ◽  
Hot Stamping Steel

Prior carburization of semi-finished steel sheets is a new process variant in hot stamping to manufacture parts with tailored properties. Compared to conventional hot stamping processes, a complex phase typed steel alloy is used instead of 22MnB5. Yet recent investigations focused on final mechanical properties rather than microstructural mechanisms cause an increase in strength. Thus, the influence of additional carburization on the microstructural evolution during hot stamping of a complex phase steel CP-W®800 is investigated within this work. The phase transformation behavior, as well as the grain growth during austenitization, is evaluated by in-situ measurements employing a laser-ultrasound sensor. The results are correlated with additional hardness measurements in as-quenched condition and supplementary micrographs. The experiments reveal that the carburization process significantly improves the hardenability of the CP-W®800. However, even at quenching rates of 70 K/s no fully martensitic microstructure was achievable. Still, the resulting hardness of the carburized samples might exceed the fully martensitic hardness of 22MnB5 derived from literature. Furthermore, the carburization process has no adverse effect on the fine grain stability of the complex phase steel. This makes it more robust in terms of grain size than the conventional hot stamping steel 22MnB5.

The Surface-Roughness of Bearing-Surfaces and its Relation to Oil Film Thickness at Breakdown

1949 ◽  
Vol 161 (1) ◽  
pp. 73-79 ◽  
Author(s):  
A. Cameron
Keyword(s):  
Surface Roughness ◽  
Film Thickness ◽  
Hydrodynamic Theory ◽  
Quantitative Relation ◽  
Metal Contact ◽  
Initial Contact ◽  
Frictional Drag ◽  
Average Roughness ◽  
Finished Steel ◽  
Oil Film

In this paper the relation of surface roughness of bearing surfaces to allowable film thickness is studied quantitatively with a simple Michell pad apparatus. The pads used were faced with white metal and ran against mild steel collars. The lubricants studied were water, soap solution, paraffin, and light oil. There was little difference in the frictional behaviour of any of the lubricants, except that the aqueous lubricants would not run with very finely finished steel surfaces. The onset of metal to metal contact was detected by an increase in the frictional drag, and also by the change in electrical conductivity between the pad and collar—an extremely sensitive method. The paper shows that there is, at any rate for this system, a quantitative relation between the total surface roughness of the rubbing surfaces and the calculated oil film thickness both at the initial metal to metal contact and seizure. Initial contact occurs when the outlet film thickness, calculated from normal hydrodynamic theory, falls to three times the maximum surface roughness and seizure occurs when it is double the average roughness.

Pre-finished steel can resemble timber

1993 ◽  
Vol 14 (5) ◽  
pp. 309
Keyword(s):  
Finished Steel

Behavior and design of cold-formed and hot-finished steel elliptical tubular stub columns

2019 ◽  
Vol 156 ◽  
pp. 252-265 ◽  
Author(s):  
Yancheng Cai ◽  
Wai-Meng Quach ◽  
Man-Tai Chen ◽  
Ben Young
Keyword(s):  
Finished Steel ◽  
Stub Columns

The Production of Finished Steel in 1912

1913 ◽  
Vol 5 (10) ◽  
pp. 867-867
Keyword(s):  
Finished Steel

A method of testing the wearing ability of finished steel surfaces

Wear ◽  
1973 ◽  
Vol 26 (1) ◽  
pp. 45-51 ◽  
Author(s):  
M.M. Khruschov ◽  
L.Y. Prujanski
Keyword(s):  
Finished Steel ◽  
Steel Surfaces
Sign in / Sign up

Export Citation Format

Share Document