scholarly journals Evaluation of the Prevalence of Concha Bullosa in Cone-Beam Computed Tomography Images

2020 ◽  
Vol 12 (3) ◽  
pp. 93-96
Author(s):  
Nasim Shams ◽  
Bahareh Shams ◽  
Zahra Sajadi
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Middle Turbinate ◽  
Cone Beam ◽  
P Value ◽  
Concha Bullosa ◽  
Computed Tomography Images ◽  
Significant Difference ◽  
And Gender ◽  
Sinus Ostium

Background: The ostiomeatal complex (OMC) is not a separate anatomical structure although it is a functional unit of structures, including the middle meatus, uncinate process, infundibulum, maxillary sinus ostium, ethmoidal bulla, anterior ethmoid sinus ostium, and frontal recess. Concha bullosa is the pneumatization of the concha, which is one of the most common anatomical variations in the middle turbinate. Methods: This study was conducted using the cone-beam computed tomography (CBCT) images of 172 patients in the archives of the Department of Oral and Maxillofacial Radiology, Dentistry School, Ahvaz Jundishapur. Patient information including age and gender, presence or absence of concha bullosa, the involved side (left or right), and its type (i.e., extensive, lamellar, and bulbous) were collected in the information form. Finally, the chi-square test (with SPSS, version 22) was used to analyze the data, and P value less than 0.05 was considered statistically significant. Results: Patients with and without concha bullosa were 39.1 and 41.7 years, respectively, but it was no significant difference in terms of age (P = 0.321). Out of 52 patients with concha bullosa, 19 (36.5%) cases were males and 33 (63.5%) of them were females. The prevalence of concha bullosa was higher for the bilateral side (20 patients, 38.5%, P = 0.000). The prevalence of bulbulsand lamellar-shape was nearly the same (32.7% and 30.8%, respectively). Eventually, the extensive shape with 36.5% was more frequent for the shape of concha bullosa (P = 0.000). Conclusions: The prevalence of concha bullosa was high. There was no significant difference in terms of age (P = 0.321) and gender (P = 0.058) of patients with concha bullosa. The extensive type and the bilateral appearance of concha bullosa were more significant (P = 0.000).

Evaluation of Mandibular Ridge Lingual Concavity Using Cone Beam Computed Tomography

2019 ◽  
Vol 10 (1) ◽  
pp. 22-25
Author(s):  
Moiza Ijaz ◽  
Saira Ibrahim ◽  
Ayesha Aslam ◽  
Abdul Rehman ◽  
Sameena Younis ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Armed Forces ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
P Value ◽  
Cross Sectional ◽  
Computed Tomography Images ◽  
Significant Difference ◽  
Pre Treatment

Objective: To evaluate the type and depth of lingual concavity in posterior mandible using pre-treatment CBCT (Cone Beam Computed Tomography) images for dental implants. Study Design and Setting: A cross-sectional study was designed and conducted on pre-treatment CBCT scans of 75 patients at Armed Forces Institute of Dentistry, Rawalpindi, Pakistan from February 2018 to November 2018. Methodology: Pre-treatment CBCT scans of 75 patients were selected and following parameters were measured: type of ridge (undercut, parallel, convex), ridge width, ridge height, depth of lingual concavity, concavity angle, and location of the undercut. Data was analyzed using SPSS version .24. Post-stratification Mann-Whitney U test was used for effect modifiers, while Kruskal-Wallis test was used to compare study parameters between groups. P value <0.05 was taken as significant. Results: A mean concavity depth of 1.17±1.40 mm was observed while majority (46.7%) of the CBCT images presented with undercut type ridge. No significant difference was observed between males and females for any study parameter. Conclusion: Undercut ridges were frequently observed, posing a threat of lingual perforation during implant placement. Pre-operative assessment of implant site using CBCT can serve as a reliable method to avoid such complications

scholarly journals Estimation of Sexual Dimorphism of the Mandible in Coastal Karnataka and Kerala Populations using Cone Beam Computed Tomography

2021 ◽  
Author(s):  
Kumuda Rao ◽  
Mahabalesh Shetty ◽  
U. S. Krishna Nayak ◽  
G. Subhas Babu ◽  
D. Prashanth Shetty ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Sexual Dimorphism ◽  
Cone Beam Computed Tomography ◽  
The Body ◽  
Anthropometric Measurements ◽  
Cone Beam ◽  
Categorical Variables ◽  
P Value ◽  
Sample Population ◽  
Computed Tomography Images

Abstract Objective The mandible has been used for sex determination and forensic identification due to its unique anatomy and morphology. Every part of the mandible is unique, including the shape and size of the temperomandibular joint, the ramus, the body and the symphysis region, and the inferior alveolar canal. In addition, the position and placement of the teeth within their sockets are unique for every individual. Sample Population A study was conducted on 20 males and females to estimate sexual dimorphism using anthropometric measurements obtained by cone beam computed tomography images of the mandible of Karnataka and Kerala populations. Materials and Methods The mean, standard deviation, and standard error along with the confidence interval of different measurements were documented. Various measurements between the sexes were compared using Student's t-test. Association between categorical variables was analyzed using the Chi-square test. A p-value < 0.05 was considered to be statistically significant. Data were analyzed using statistical SPSS software. Results The p-value of mRBr L, GA L, and GA R among females was significantly higher in the Karnataka population when compared with that in the Kerala population. The Karnataka State population showed significantly higher values of RL R, BiGBr, and BiCBr among males, and the p-value of the Kerala population for GGL L and GGL R was significant and higher among the males. Conclusion The data derived from the above study suggest that the mandibular anthropometric measurements used may be applied for forensic sex estimation.

scholarly journals Upper airway assessment using four different maxillary expanders in cleft patients: A cone-beam computed tomography study

2015 ◽  
Vol 86 (4) ◽  
pp. 617-624 ◽  
Author(s):  
Carolina Morsani Mordente ◽  
Juan Martin Palomo ◽  
Martinho Campolina Rebello Horta ◽  
Bernardo Quiroga Souki ◽  
Dauro Douglas Oliveira ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Cone Beam ◽  
Nasal Passage ◽  
Maxillary Expansion ◽  
Computed Tomography Images ◽  
Intergroup Comparison ◽  
Significant Difference

ABSTRACTObjective: To evaluate the anterior and posterior maxillary width, the nasal passage volume, the oropharyngeal minimum axial area, and volume changes in unilateral cleft lip and palate patients treated with one of the following four expanders: Hyrax, Fan-Type, inverted mini-hyrax supported on the first permanent molars (iMini-M), or inverted mini-hyrax supported on the first premolars (iMini-B).Materials and Methods: A total of 40 patients with transverse maxillary deficiency who were submitted for rapid maxillary expansion were divided in four groups according to type of expander used. Cone-beam computed tomography images were taken before and 3 months after expansion. One-way analysis of variance was used to analyze the differences among the groups, and paired t-tests were used to evaluate the changes in each group.Results: All groups showed a significant increase in the anterior maxillary width, with no intergroup differences. The iMini-B was the only group that did not show a significant increase in the posterior maxillary width. The intergroup comparison demonstrated differences among all groups except between Hyrax and iMini-M, which showed the greatest posterior expansions. The intragroup analysis showed a significant increase in the nasal passage volume in hyrax and inverted mini-hyrax on the molar groups, but the intergroup comparison revealed a significant difference only between Fan-Type and inverted mini-hyrax on the molars. None of the expanders caused significant changes in the oropharyngeal measurements.Conclusions: Only the Hyrax and inverted mini-hyrax on the molar expanders effectively increased the nasal passage volume, and none of the expanders evaluated in this study modified the oropharyngeal airway.

Cone-Beam Computed Tomography Evaluation of Skeletal Deformities and Pharyngeal Airway in Chinese Han Individuals With Nonsyndromic Unilateral Cleft Lip and Palate

2019 ◽  
Vol 57 (1) ◽  
pp. 65-72 ◽  
Author(s):  
Yuan Zhang ◽  
Yuhua Wang ◽  
Yaoyuan Zhang ◽  
Sheng Li ◽  
Lin Wang ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Cone Beam ◽  
Skeletal Deformities ◽  
Pharyngeal Airway ◽  
Face Height ◽  
Computed Tomography Images ◽  
Significant Difference

Objective: This study examined the relationships between skeletal deformities and the pharyngeal airway of patients with nonsyndromic unilateral cleft lip and palate (UCLP). Design: Retrospective study. Setting: Orthodontics and Oral and Maxillofacial Surgery Departments in the Affiliated Hospital of Stomatology, Nanjing Medical University, China. Patients, Participants: The sample comprised 30 nonsyndromic UCLP patients and 30 healthy controls. Each group has 23 males and 7 females. Interventions: All cone-beam computed tomography images were obtained with the participant in the standard supine position and asked to bite with intercuspal position without swallowing or moving their heads and tongues during scanning. Main Outcome Measure(s): SNA, SNB, ANB, anterior cranial base, Wits appraisal, maxillary length (PTM-ANS || FH), maxillary position (S-PTM || FH), mandibular length (Go-Pog || MP), FMA, posterior face height, anterior face height, Posterior-Anterior face height, lower face height, pharyngeal airway volumes, and areas were evaluated by Dolphin imaging software. Results: The UCLP group showed significantly decreased SNA, SNB, ANB, PTM-ANS || FH, S-PTM || FH, P-A Face Height compared with the controls. However, the airway volumes and areas showed no significant difference between 2 groups. The total airway volume and minimum cross-sectional area in UCLP patients were related to the Go-Pog || MP and FMA. Conclusions: Patients with UCLP have both the maxillary and mandibular deficiencies in the sagittal dimension. Both the sagittal and vertical relationships of the jaw might affect the airway volume and area. However, no significant difference was detected in airway volume and area in UCLP patients when compared with the controls.

scholarly journals Characteristics and Prevalence of Anterior Buccal Mandibular Depression Area in Cone Beam Computed Tomography Images

2021 ◽  
Vol 25 (3) ◽  
pp. 170-177
Author(s):  
Taha Emre Köse ◽  
Onur Dinçer Köse ◽  
Gülay Altan Şallı
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Maximum Depth ◽  
Cone Beam ◽  
Maximum Width ◽  
Cross Sectional ◽  
Area Of Interest ◽  
Computed Tomography Images ◽  
Alveolar Crest ◽  
Significant Difference

Summary Background/Aim: The purpose of this study was to assess the anterior buccal mandibular depressions (ABMD) prevalence and clinical characteristics at cone beam computed tomography images (CBCT). Material and Methods: 198 CBCT images with minimal depression between the mandibular molars were evaluated retrospectively. Presence and location of ABMD, its maximum depth, maximum width, cortical width, if any, alveolar crest width at maximum depth, the distance between maximum depth and alveolar crest apex and existing teeth in the relevant region were examined in cross-sectional views. Panoramic radiography of ABMD patients was evaluated for trabecular pattern and radiopacity to determine the area of interest. The possible lingual depression area on the maximum depth of ABMD slice was investigated and the same measurements for ABMD was performed. The presence of aperture / foramen in the ABMD area was also investigated. Results: The prevalence of ABMD was found as 43.43% where 82 cases were at bilateral side and 4 cases were only at left side. Lingual depression was observed in 20.7% right side and 30.2% left side of the ABMD cases. There was no statistically significant difference for maximum depth between different age groups. Most frequent location was observed in lateral and canine region (27.4%) followed by lateral-first premolar area (25.6%). Least frequent location was at canine-second premolar area (1.2%). Conclusions: ABMD is a lesser known area with a high prevalence observed on CBCT images. The detectability of the area on panoramic radiographs is limited. Clinicians should take into consideration ABMDs’ characteristics to avoid confusion with periapical pathologies. Failure to detect these areas before implant surgeries may cause complications. For this reason, it is important to be examined in detail for ABMD before surgery.

scholarly journals The Proximity of Mental Foramen to Mandibular First Premolar Teeth: Cone Beam Computed Tomography Analysis in Turkish Population

2021 ◽  
Vol 25 (1) ◽  
pp. 29-33
Author(s):  
Ozkan Adiguzel ◽  
Suzan Cangul ◽  
Artemisa Adiguzel ◽  
Begum Erpacal ◽  
Zeki Akkus
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Turkish Population ◽  
Mental Foramen ◽  
Cone Beam ◽  
Age And Gender ◽  
Significant Difference ◽  
Mandibular First Premolar ◽  
And Gender ◽  
Gender Groups

SummaryBackground/Aim: The aim of this study was to evaluate the proximity of the mental foramen (MF) to the roots of the mandibular first premolar teeth in the Turkish population according to gender and different age groups.Material and Methods: The study was conducted on 385 samples of 242 patients who presented at the Dicle University, Faculty of Dentistry, Department of Dentomaxillofacial Radiology. The proximity of the MF to mandibular first premolar teeth was examined on cone beam computed tomography (CBCT) images. Two-way Anova variance analysis was used in the statistical analyses of the data.Results: According to the analysis results, no statistically significant difference was determined between the age and gender groups (p>0.05). In the evaluation of the gender groups, the mean value was 6.6997 mm for females and 6.5445 mm for males.Conclusions: With 3-dimensional imaging technology, the CBCT system provides detailed information about the MF localization. This method has shown that the localization of the MF could change associated with variables such as age and gender.

scholarly journals Reproducibility of landmark identification in the jaw and teeth on 3-dimensional cone-beam computed tomography images

2011 ◽  
Vol 81 (5) ◽  
pp. 843-849 ◽  
Author(s):  
Mariko Fuyamada ◽  
Hiroyuki Nawa ◽  
Momoko Shibata ◽  
Kazuhito Yoshida ◽  
Yoshitaka Kise ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Three Dimensional ◽  
Cone Beam ◽  
Volume Data ◽  
3D Images ◽  
3 Dimensional ◽  
Computed Tomography Images ◽  
Landmark Identification ◽  
Significant Difference

Abstract Objective: To compare the reproducibility of landmark identification on three-dimensional (3D) cone-beam computed tomography (CBCT) images between procedures based on traditional cephalometric definitions (procedure 1) and those tentatively proposed for 3D images (procedure 2). Materials and Methods: A phantom with embedded dried human skull was scanned using CBCT. The acquired volume data were transferred to a personal computer, and 3D images were reconstructed. Eighteen dentists plotted nine landmarks related to the jaws and teeth four times: menton (Me), pogonion (Po), upper-1 (U1), lower-1 (L1), left upper-6 (U6), left lower-6 (L6), gonion (Go), condyle (Cd), and coronoid process (Cp). The plotting reliabilities of the two procedures were compared by calculating standard deviations (SDs) in three components (x, y, and z) of coordinates and volumes of 95% confidence ellipsoid. Results: All 27 SDs for procedure 2 were less than 1 mm, and only five of them exceeded 0.5 mm. The variations were significantly different between the two procedures, and the SDs of procedure 2 were smaller than those of procedure 1 in 21 components of coordinates. The ellipsoid volumes were also smaller for procedure 2 than procedure 1, although a significant difference was not found. Conclusions: Definitions determined strictly on each three sectional images, such as for procedure 2, were required for sufficient reliability in identifying the landmark related to the jaws and teeth.

Three-Dimensional Assessment of Cervical Vertebrae Anomalies in Patients With Cleft Lip and Palate

2020 ◽  
pp. 105566562098022
Author(s):  
Gabriella L. de Rezende Barbosa ◽  
Luiz A. Pimenta ◽  
Donald A. Tyndall ◽  
Trishul V. Allareddy ◽  
Saulo L. Sousa Melo
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Cervical Vertebrae ◽  
Cone Beam ◽  
Os Odontoideum ◽  
Posterior Arch ◽  
Computed Tomography Images ◽  
Significant Difference

Objective: To evaluate the occurrence of cervical vertebrae anomalies (CVA) in patients with unilateral (UCLP) and bilateral cleft lip and palate (BCLP) using cone beam computed tomography (CBCT) examinations. Design: Retrospective assessment of CBCT images. Descriptive statistics were calculated. Fisher exact test or χ2 test was performed to evaluate the differences among each CVA between sex and type of cleft. Setting: School of Dentistry. Participants: One hundred fifty-one patients with cleft lip and palate (103 UCLP/48 BCLP). Interventions: No relevant intervention. Main Outcome Measures: Cone beam computed tomography images were assessed for the presence or absence of 12 most commonly observed CVA: spina bifida, dehiscence, cleft of the posterior arch, cleft of the anterior arch, fusion between cervical vertebrae, block fusion, occipitalization, narrowing of the intervertebral space, posterior ponticle, os odontoideum, ossiculum terminale, and subdental cartilaginous remnants. Results: The presence of subdental cartilaginous remnants was the most frequently observed alteration—found in 81.45% of the sample—and it was the only CVA with statistically significant frequencies in the individuals with BCLP. Considering only the other CVA, 22.51% presented 1 and 5.29% presented 2 or more CVA. Conclusions: Patients with cleft lip and palate may present an overall high incidence of CVAs. However, when comparing the distribution of the CVAs among sex and types of cleft, the only significant difference noted was a higher incidence of subdental cartilaginous remnants among patients with BCLP.

A retrospective pilot study of correlation of first maxillary premolar root trunk length with age and gender: a cone beam computed tomography study

2020 ◽  
Vol 69 (1) ◽  
Author(s):  
Andrea Pilloni ◽  
Lorenza Montanaro ◽  
Fabiola Dell'olmo ◽  
Alberto Fonzar ◽  
Francesco Cairo ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Pilot Study ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Age And Gender ◽  
Trunk Length ◽  
And Gender

scholarly journals Variations in vertical mucosal thickness at edentulous ridge according to site and gender measured by cone-beam computed tomography

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Motohiro Munakata ◽  
Koudai Nagata ◽  
Minoru Sanda ◽  
Ryota Kawamata ◽  
Daisuke Sato ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Treatment Plan ◽  
Cone Beam ◽  
Alveolar Ridge ◽  
Marginal Bone Loss ◽  
Mandibular Molar ◽  
Mucosal Thickness ◽  
And Gender ◽  
Edentulous Patients

Abstract Background The vertical thickness of the peri-implant mucosa is associated with the amount of post treatment marginal bone loss. However, the variations in mucosal thickness at the different edentulous sites have been sparsely documented. The purpose of the study was to conduct a survey of the frequency distribution of variations in mucosal thickness at the different sites of the edentulous alveolar ridge and to compare them according to gender. Our study included 125 partially edentulous patients having a total of 296 implant sites. Cone-beam computed tomography (CBCT) scans were obtained by placing a diagnostic template with a radiopaque crown indicator on the ridge to determine the mucosal thickness at the crest of the alveolar ridge. Results The mucosal thickness was 3.0±1.3 mm in the maxilla, which was significantly greater than the mucosal thickness of 2.0±1.0 mm in the mandible (p<0.001). In both the maxilla and the mandible, the mucosa was the thickest in the anterior region, followed by the premolar and molar regions. Sites were further classified into two groups based on whether the mucosal thickness was greater than 2 mm. In the mandible, more than half of the sites showed a mucosal thickness of 2 mm or less. Conclusions Although this study was a limited preoperative study, the vertical mucosal thickness at the edentulous ridge differed between the maxillary and mandibular regions. The majority of sites in the mandibular molar region had a mucosal thickness of less than 2 mm. Practitioners might be able to develop an optimal dental implant treatment plan for long-term biologic and esthetic stability by considering these factors.

Sign in / Sign up

Export Citation Format

Share Document