scholarly journals Characteristics and Prevalence of Anterior Buccal Mandibular Depression Area in Cone Beam Computed Tomography Images

2021 ◽  
Vol 25 (3) ◽  
pp. 170-177
Author(s):  
Taha Emre Köse ◽  
Onur Dinçer Köse ◽  
Gülay Altan Şallı
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Maximum Depth ◽  
Cone Beam ◽  
Maximum Width ◽  
Cross Sectional ◽  
Area Of Interest ◽  
Computed Tomography Images ◽  
Alveolar Crest ◽  
Significant Difference

Summary Background/Aim: The purpose of this study was to assess the anterior buccal mandibular depressions (ABMD) prevalence and clinical characteristics at cone beam computed tomography images (CBCT). Material and Methods: 198 CBCT images with minimal depression between the mandibular molars were evaluated retrospectively. Presence and location of ABMD, its maximum depth, maximum width, cortical width, if any, alveolar crest width at maximum depth, the distance between maximum depth and alveolar crest apex and existing teeth in the relevant region were examined in cross-sectional views. Panoramic radiography of ABMD patients was evaluated for trabecular pattern and radiopacity to determine the area of interest. The possible lingual depression area on the maximum depth of ABMD slice was investigated and the same measurements for ABMD was performed. The presence of aperture / foramen in the ABMD area was also investigated. Results: The prevalence of ABMD was found as 43.43% where 82 cases were at bilateral side and 4 cases were only at left side. Lingual depression was observed in 20.7% right side and 30.2% left side of the ABMD cases. There was no statistically significant difference for maximum depth between different age groups. Most frequent location was observed in lateral and canine region (27.4%) followed by lateral-first premolar area (25.6%). Least frequent location was at canine-second premolar area (1.2%). Conclusions: ABMD is a lesser known area with a high prevalence observed on CBCT images. The detectability of the area on panoramic radiographs is limited. Clinicians should take into consideration ABMDs’ characteristics to avoid confusion with periapical pathologies. Failure to detect these areas before implant surgeries may cause complications. For this reason, it is important to be examined in detail for ABMD before surgery.

Evaluation of Mandibular Ridge Lingual Concavity Using Cone Beam Computed Tomography

2019 ◽  
Vol 10 (1) ◽  
pp. 22-25
Author(s):  
Moiza Ijaz ◽  
Saira Ibrahim ◽  
Ayesha Aslam ◽  
Abdul Rehman ◽  
Sameena Younis ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Armed Forces ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
P Value ◽  
Cross Sectional ◽  
Computed Tomography Images ◽  
Significant Difference ◽  
Pre Treatment

Objective: To evaluate the type and depth of lingual concavity in posterior mandible using pre-treatment CBCT (Cone Beam Computed Tomography) images for dental implants. Study Design and Setting: A cross-sectional study was designed and conducted on pre-treatment CBCT scans of 75 patients at Armed Forces Institute of Dentistry, Rawalpindi, Pakistan from February 2018 to November 2018. Methodology: Pre-treatment CBCT scans of 75 patients were selected and following parameters were measured: type of ridge (undercut, parallel, convex), ridge width, ridge height, depth of lingual concavity, concavity angle, and location of the undercut. Data was analyzed using SPSS version .24. Post-stratification Mann-Whitney U test was used for effect modifiers, while Kruskal-Wallis test was used to compare study parameters between groups. P value <0.05 was taken as significant. Results: A mean concavity depth of 1.17±1.40 mm was observed while majority (46.7%) of the CBCT images presented with undercut type ridge. No significant difference was observed between males and females for any study parameter. Conclusion: Undercut ridges were frequently observed, posing a threat of lingual perforation during implant placement. Pre-operative assessment of implant site using CBCT can serve as a reliable method to avoid such complications

scholarly journals Anatomic Variation in Lingual Foramen: A Cone beam Computed Tomography Study

2016 ◽  
Vol 7 (4) ◽  
pp. 179-181 ◽  
Author(s):  
Almas Binnal ◽  
E Ceena Denny ◽  
Ritika Jindal
Keyword(s):  
Computed Tomography ◽  
Surgical Procedures ◽  
Cone Beam Computed Tomography ◽  
Alveolar Bone ◽  
Anatomic Variation ◽  
Cone Beam ◽  
Cross Sectional ◽  
Lingual Foramen ◽  
Alveolar Crest ◽  
Significant Difference

ABSTRACT Background Lingual foramen is usually located in the midline, leveled with or superior to the genial tubercles. The success of implant placements is dependent on the radiological examination, which helps the clinician to determine the parameters of implant placement by revealing the structures like the course of the nerves, location of foramens, height and shape of alveolar bone, etc. The present study was done to assess the appearance, visibility, location, and types of lingual foramen in the mandibular region. Materials and methods A cross-sectional retrospective study was conducted using cone beam computed tomography (CBCT) images of 116 patients who attended the department for various imaging purposes. The examinations were carried out using the Promax three-dimensional (3D) CBCT unit. The cross-sectional images were examined to detect the presence, number, and position of the lingual foramen. Chi-square and Fisher's exact tests were used for comparison of categorical data. Results We observed lingual foramen in 116 patients and their number ranged from 1 to 3. When comparing the position, it was observed that lingual foramen was located at approximately two-thirds (60th percentile from the alveolar crest) distance from the alveolar crest to lower border of the mandible and there was no significant difference in various age groups or between both genders. Conclusion Lingual foramen transmits neurovascular bundles to surrounding structures, hence any damage to the lingual foramen during surgical procedures can result in hemorrhage and/or neurosensory disturbances. It is therefore mandatory for a dentist to be aware of the structures present in the anterior mandible when considering any surgical procedures or implant planning. Hence, CBCT plays a pivotal role during implant planning and surgical procedures in dentistry. How to cite this article Denny CE, Natarajan S, Ahmed J, Binnal A, Jindal R. Anatomic Variation in Lingual Foramen: A Cone beam Computed Tomography Study. World J Dent 2016;7(4):179-181.

scholarly journals Evaluation of the Prevalence of Concha Bullosa in Cone-Beam Computed Tomography Images

2020 ◽  
Vol 12 (3) ◽  
pp. 93-96
Author(s):  
Nasim Shams ◽  
Bahareh Shams ◽  
Zahra Sajadi
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Middle Turbinate ◽  
Cone Beam ◽  
P Value ◽  
Concha Bullosa ◽  
Computed Tomography Images ◽  
Significant Difference ◽  
And Gender ◽  
Sinus Ostium

Background: The ostiomeatal complex (OMC) is not a separate anatomical structure although it is a functional unit of structures, including the middle meatus, uncinate process, infundibulum, maxillary sinus ostium, ethmoidal bulla, anterior ethmoid sinus ostium, and frontal recess. Concha bullosa is the pneumatization of the concha, which is one of the most common anatomical variations in the middle turbinate. Methods: This study was conducted using the cone-beam computed tomography (CBCT) images of 172 patients in the archives of the Department of Oral and Maxillofacial Radiology, Dentistry School, Ahvaz Jundishapur. Patient information including age and gender, presence or absence of concha bullosa, the involved side (left or right), and its type (i.e., extensive, lamellar, and bulbous) were collected in the information form. Finally, the chi-square test (with SPSS, version 22) was used to analyze the data, and P value less than 0.05 was considered statistically significant. Results: Patients with and without concha bullosa were 39.1 and 41.7 years, respectively, but it was no significant difference in terms of age (P = 0.321). Out of 52 patients with concha bullosa, 19 (36.5%) cases were males and 33 (63.5%) of them were females. The prevalence of concha bullosa was higher for the bilateral side (20 patients, 38.5%, P = 0.000). The prevalence of bulbulsand lamellar-shape was nearly the same (32.7% and 30.8%, respectively). Eventually, the extensive shape with 36.5% was more frequent for the shape of concha bullosa (P = 0.000). Conclusions: The prevalence of concha bullosa was high. There was no significant difference in terms of age (P = 0.321) and gender (P = 0.058) of patients with concha bullosa. The extensive type and the bilateral appearance of concha bullosa were more significant (P = 0.000).

Correction of Cupping Artifacts in Axial Cone-Beam Computed Tomography Images by Using Image Processing Algorithms

2019 ◽  
Vol 10 (2) ◽  
pp. 132-136
Author(s):  
Tahmineh Razi ◽  
Nader Vahdani Manaf ◽  
Morteza Yadekar ◽  
Sedigheh Razi ◽  
Shiva Gheibi
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Imaging System ◽  
Dental Materials ◽  
Cone Beam ◽  
Correction Coefficient ◽  
Gamma Correction ◽  
Cross Sectional ◽  
Computed Tomography Images ◽  
Cupping Artifacts

Objectives: One of the most important problems of cone-beam computed tomography (CBCT) imaging technique is the presence of dense objects, such as implants, amalgam fillings, and metal veneers, which result in beam-hardening artifacts. With an increase in the application of CBCT images and considering the problems in relation to cupping artifacts, some algorithms have been presented to reduce these artifacts. The aim was to present an algorithm to eliminate cupping artifacts from axial and other reconstructed CBCT images. Materials and Methods: We used CBCT images of NewTom VG imaging system (Verona, Italy, at Dentistry Faculty, Medical Sciences University, Tabriz, Iran) in which every image has a resolution of 366 × 320 in DICOM format. 50 images of patients with cupping artifacts were selected. Using Sobel edge detector and nonlinear gamma correction coefficient, the difference was calculated between the density of axial images in the main image and the image resulting from nonlinear gamma correction at the exact location of the radiopaque dental materials detected by Sobel. The points at which this density difference was out of a definite limit were treated as image artifacts and were eliminated from the main image by the inpainting method. Results: The resultant axial images, for producing reconstructed cross-sectional, panoramic images without cupping artifacts, were imported into NTT viewer V5.6 and utilized. Conclusions: With comparison, acquired images observed that the offering algorithm is practical and effective for reducing the cupping artifacts and preserving the quality of the reconstructed images. This algorithm does not need any additional equipment.

scholarly journals Cone Beam Computed Tomography-Based Anatomical Assessment of the Olfactory Fossa

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Andre Luiz Ferreira Costa ◽  
Aline Kataki Paixão ◽  
Bianca Costa Gonçalves ◽  
Celso Massahiro Ogawa ◽  
Thiago Martinelli ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Type I ◽  
Type Ii ◽  
Sectional Study ◽  
Cross Sectional ◽  
Computed Tomography Images ◽  
The Mean

This study aimed to investigate the olfactory fossa according to the Keros classification using cone beam computed tomography. This cross-sectional study analysed cone beam computed tomography images selected from a database belonging to a radiology centre. The scans of 174 healthy patients were analysed by using the Xoran software. Gender, age, and side were correlated with the Keros classification. The mean age of the 174 patients was 45.3 years. The most prevalent Keros classification was type II (65.52%), followed by type III (20.69%) and type I (13.79%). No significant differences were found between Keros classification and the variables age, right side (pvalue = 0.4620), and left side (pvalue = 0.5709). There were also no significant differences between gender and the variables right side (pvalue = 0.1421) and left side (pvalue = 0.2136). Based on these results, we suggest that cone beam computed tomography can be recommended for analysis of the anterior skull base. Keros type II was the most prevalent type in our sample.

scholarly journals Assessment of Labial Alveolar Bone Thickness in Maxillary Central Incisor using Cone Beam Computed Tomography

2021 ◽  
Vol 5 (1) ◽  
pp. 2-6
Author(s):  
Shaili Pradhan ◽  
Rejina Shrestha ◽  
Ranjita Shrestha Gorkhali ◽  
Pramod Kumar Koirala
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Alveolar Bone ◽  
Cone Beam ◽  
Central Incisor ◽  
Bone Thickness ◽  
Cross Sectional ◽  
Dental Surgery ◽  
Maxillary Central Incisor ◽  
Significant Difference

Introduction: The maxillary anterior region is becoming a major concern due to its aesthetic relevance. The buccal bone thickness is important for implant placement, orthodontic treatment and restorative treatment. Objective: To assess the thickness of alveolar bone in the maxillary central incisor using cone beam computed tomography (CBCT). Methods: A cross-sectional observational study was conducted at Department of Dental Surgery, Bir Hospital where CBCT of 53 samples from July 2019 till December 2019, the archived CBCT images was assessed retrospectively. The thickness of the labial bone in a direction perpendicular to the outer surface of the tooth root was measured at a distance of 2 mm from the cementoenamel junction (CEJ). The measurement was taken thrice and the mean measurement was considered. Results: The labial alveolar bone thickness in maxillary central incisor was found to be 0.55±0.27 mm at a distance of 2 mm from the CEJ. Only 2 (3.8%) of the samples had an alveolar thickness of >1 mm. No statistically significant difference was found with respect to gender and age. Conclusion: The average thickness of the labial alveolar bone in maxillary central incisor using cone beam computed tomography was found to be thin. 

scholarly journals Root Resorption of Adjacent Teeth Associated with Maxillary Canine Impaction in the Saudi Arabian Population: A Cross-Sectional Cone-Beam Computed Tomography Study

2021 ◽  
Vol 12 (1) ◽  
pp. 334
Author(s):  
Ahmed Mohammed Alassiry ◽  
Zaki Hakami
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Resorption ◽  
Saudi Arabian ◽  
Cone Beam ◽  
Maxillary Canine ◽  
Cross Sectional ◽  
Logistic Regression Models ◽  
Significant Difference ◽  
Arabian Population

This study aimed to identify the location of root resorption in relation to an impacted maxillary canine and grade its severity using cone-beam computed tomography (CBCT) in the Saudi Arabian population. Materials and Methods: CBCT scans of 169 patients with maxillary canine impaction were evaluated. The location and the severity of root resorption of the affected tooth in relation to the impacted maxillary canine were recorded for each patient. Results: a total 204 impacted maxillary canines caused root resorption in 218 adjacent teeth. Maximum root resorption was present in 63.3% of the apical one-third of the root and 37.6% of the palatal surfaces. There was mild root resorption in 55%, moderate in 10% and severe in 35%. There was no statistically significant difference between the gender, age, type of impaction, side of impaction, and the number, location, or degree of root resorption. Multiple logistic regression models showed significant association (p = 0.024) between gender, type of impaction, and root resorption. A significant correlation was found between the level and the surface of the root resorption (p = 0.018). Conclusion: In the Saudi population, apical one-third root levels and palatal surfaces were primarily involved in root resorption caused by impacted canines. The females with bilateral canine impaction were more likely affected by root resorption.

scholarly journals Morphometric Analysis of Greater Palatine Canal via Cone-Beam Computed Tomography

2018 ◽  
Vol 22 (3) ◽  
pp. 150-156
Author(s):  
Melih Özdede ◽  
Elif Yıldızer Keriş ◽  
Bülent Altunkaynak ◽  
İlkay Peker
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Sagittal Plane ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Cross Sectional ◽  
Maxillary Nerve ◽  
Computed Tomography Images ◽  
Greater Palatine Canal ◽  
The Mean

SummaryBackground/Aim: The morphology of the greater palatine canal (GPC) should be determined preoperatively to prevent possible complications in surgical procedures required maxillary nerve block anesthesia and reduction of descending palatine artery bleeding. The purpose of this investigation was to evaluate the GPC morphology.Material and Methods: In this retrospective cross-sectional study, cone-beam computed tomography images obtained for various causes of 200 patients (females, 55%; males, 45%) age ranged between 18 and 86 (mean age±standard deviation=47±13.6) were examined. The mean length, mean angles of the GPC and anatomic routes of the GPC were evaluated.Results: The mean length of the GPC was found to be 31.07 mm and 32.01 mm in sagittal and coronal sections, respectively. The mean angle of the GPC was measured as 156.16° and 169.23° in sagittal and coronal sections. The mean angle of the GPC with horizontal plane was measured as 113.76° in the sagittal sections and 92.94° in the coronal sections. The mean GPC length was longer in males than in females.Conclusions: The results of this study showed that the most common pathway of the GPC was “first inferior, and then anterior-inferior direction” in sagittal plane and “first medial-inferior, then inferior direction” in coronal plane.

scholarly journals Upper airway assessment using four different maxillary expanders in cleft patients: A cone-beam computed tomography study

2015 ◽  
Vol 86 (4) ◽  
pp. 617-624 ◽  
Author(s):  
Carolina Morsani Mordente ◽  
Juan Martin Palomo ◽  
Martinho Campolina Rebello Horta ◽  
Bernardo Quiroga Souki ◽  
Dauro Douglas Oliveira ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Cone Beam ◽  
Nasal Passage ◽  
Maxillary Expansion ◽  
Computed Tomography Images ◽  
Intergroup Comparison ◽  
Significant Difference

ABSTRACTObjective: To evaluate the anterior and posterior maxillary width, the nasal passage volume, the oropharyngeal minimum axial area, and volume changes in unilateral cleft lip and palate patients treated with one of the following four expanders: Hyrax, Fan-Type, inverted mini-hyrax supported on the first permanent molars (iMini-M), or inverted mini-hyrax supported on the first premolars (iMini-B).Materials and Methods: A total of 40 patients with transverse maxillary deficiency who were submitted for rapid maxillary expansion were divided in four groups according to type of expander used. Cone-beam computed tomography images were taken before and 3 months after expansion. One-way analysis of variance was used to analyze the differences among the groups, and paired t-tests were used to evaluate the changes in each group.Results: All groups showed a significant increase in the anterior maxillary width, with no intergroup differences. The iMini-B was the only group that did not show a significant increase in the posterior maxillary width. The intergroup comparison demonstrated differences among all groups except between Hyrax and iMini-M, which showed the greatest posterior expansions. The intragroup analysis showed a significant increase in the nasal passage volume in hyrax and inverted mini-hyrax on the molar groups, but the intergroup comparison revealed a significant difference only between Fan-Type and inverted mini-hyrax on the molars. None of the expanders caused significant changes in the oropharyngeal measurements.Conclusions: Only the Hyrax and inverted mini-hyrax on the molar expanders effectively increased the nasal passage volume, and none of the expanders evaluated in this study modified the oropharyngeal airway.

Sign in / Sign up

Export Citation Format

Share Document