scholarly journals THE ASPECTS OF ALMG6 ALUMINIUM ALLOY DEFORMATION UNDER EXPLOSIVE WELDING

2021 ◽  
pp. 48-54
Author(s):  
A. Yu. Malakhov ◽  
N. N. Niyozbekov ◽  
I. V. Saikov ◽  
I. V. Denisov
Keyword(s):  
Detonation Velocity ◽  
Deformation Process ◽  
Explosive Welding ◽  
Explosion Welding ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Longitudinal Deformation ◽  
Corrosion Resistant ◽  
Plate Area ◽  
Residual Deformations

The paper presents the results of a study of the features of the deformation of the main plate made of AlMg6 in the process of explosion welding (with corrosion-resistant steel 08Cr18Ni10Ti). It was found that the end and edge sections of the main plate undergo severe deformation, as evidenced by the constructed maps of the distribution of residual deformations over the plate area. With an increase in the detonation velocity, an intensification of the deformation process occurs, which leads to the appearance of cracks and local spalling of plate fragments. In addition, the results of measurements of the elongation of the main plate showed that a noticeable longitudinal deformation of the plate begins approximately at a distance equal to 2/3 of the total length of the plate. The measured value of the beginning of elongation (240 ± 10 mm) with an accuracy of 95% converges with the calculated value (229 mm).

scholarly journals MANUFACTURE OF A ROUND BIMETALLIC WORK WITH A FLATING LAYER FROM CORROSION-RESISTANT STEEL

2020 ◽  
pp. 16-22
Author(s):  
V. Danenko ◽  
L. Gurevich ◽  
S. Bulaeva ◽  
G. Ponkratova ◽  
M. Skalkin
Keyword(s):  
Comparative Analysis ◽  
Hot Rolling ◽  
Experimental Studies ◽  
Explosion Welding ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Welding Joint ◽  
Tear Resistance

A comparative analysis of the methods for manufacturing a round bimetallic billet for wire production is carried out: explosion welding; joint hot rolling (batch rolling). The results of experimental studies of the shear and tear resistance when determining the strength of the connection of the layers are shown, which showed that reliable adhesion between the layers is achieved in the manufacture of the workpiece by both methods.

REMANIT 4439

Alloy Digest ◽  
1993 ◽  
Vol 42 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Low Carbon ◽  
Corrosion Resistant ◽  
Mechanical Properties And Corrosion

Abstract REMANIT 4439 is a highly corrosion resistant steel with low carbon content, an addition of nitrogen to enhance both mechanical properties and corrosion resistance, and higher molybdenum than most stainless steels to resist pitting and crevice corrosion in chloride media. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-556. Producer or source: Thyssen Stahl AG.

ARMCO 410 Cb

Alloy Digest ◽  
1963 ◽  
Vol 12 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract Armco 410 Cb is a modified Type 410 corrosion resistant steel by the addition of columbium. It is extremely tough and impact resistant. It is a hardenable grade but less sensitive to tempering variables than Type 410. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-145. Producer or source: Armco Inc., Eastern Steel Division. See also Alloy Digest SS-261, October 1971.

RA 309

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract RA 309 is a chromium-nickel heat and corrosion resistant steel recommended for high temperatures applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-142. Producer or source: Rolled Alloys Inc..

USS CARILLOY 2% Cr-1/2% Mo

Alloy Digest ◽  
1957 ◽  
Vol 6 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
United States Steel Corporation ◽  
Temperature Performance ◽  
Alloy Oxidation ◽  
Oxidation And Corrosion

Abstract CARILLOY 2% Cr-1/2% Mo is a low alloy oxidation and corrosion resistant steel suitable for moderately high (900-1100 deg. F.) temperature use. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-54. Producer or source: United States Steel Corporation.

FERRIUM S53

Alloy Digest ◽  
2008 ◽  
Vol 57 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Aircraft Landing ◽  
Aircraft Landing Gear ◽  
Better Than

Abstract Ferrium S53 was developed for use as a structural corrosion resistant steel for aircraft landing gear. S53 has a corrosion resistance equivalent to 440C, strength equivalent to or better than 300M (AMS 6257A) and SAE 4340 (see Mechanical Properties), optimum microstructure features for maximum fatigue resistance, and a surface hardenability equal to or greater than 67 HRC for wear and fatigue. This datasheet is an update to Alloy Digest SS-942 and SS-1003. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SA-589. Producer or source: QuesTek Innovations, LLC.

Sign in / Sign up

Export Citation Format

Share Document