scholarly journals Enhancement of Power Transfer Capacity and Transmission Efficiency using SSSC

2020 ◽  
Vol 9 (3) ◽  
pp. 2846-2850
Keyword(s):  
Power System ◽  
Transmission Lines ◽  
Carrying Capacity ◽  
Comparative Investigation ◽  
Transmission Efficiency ◽  
Power Demand ◽  
Voltage Profile ◽  
Facts Devices ◽  
Load Demand ◽  
Viable Solution

The power demand is increasing globally at a higher rate than the possible increase in the generation. The increased demand requierements put additional burdon on the existing transmission lines and sometimes burdoned beyond their power carrying capacities. Increase in power demand either due modernization of power system, industrialization leads to congestion problem and abruptly affects the stable and reliable operation of power system. Redesign and reconstruction of power system according to load requirements everytime is not an economical and viable solution. Other possible solution to the problem is use of FACTS devices. The use of FACTS devices the problems like increase in load demand, high losses in transmission line and dip in receiving end voltage can be eliminated or easily tackeled. In this paper, Static Synchronous Series Compensator as one of FACTS device has been used for improvement of voltage profile of different buses and power carrying capacity of the transmission lines. The main objective of this paper is to make a comparative investigation between compensated and uncompensated power system in terms of enhancement of power carrying capacity with low losses and improvement of voltage profiles of buses in the transmission network. The performance of uncompensated power system has been compared with compensated power system with the use of MATLAB/ Simulink software.

scholarly journals REVIEW PAPER ON OPTIMAL LOCATION OF SHUNT FACTS DEVICES BY EVOLUTIONARY PROGRAMMING BASED ON OPTIMAL POWER FLOW IN POWER SYSTEM.

2016 ◽  
pp. 196-199
Author(s):  
PRANALI H. DEKATE
Keyword(s):  
Power System ◽  
Transmission Lines ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Power Transmission ◽  
Sensitivity Index ◽  
Voltage Profile ◽  
Computation Techniques ◽  
Facts Devices ◽  
Optimal Power

The modern power system is operating closed to its voltage and thermal instability limits. The present transmission network was not originally planned for heavy power trading in the market. The time is to maximize the utilization of existing transmission lines and to manage the congestion. FACTS (Flexible AC transmission system) devices are having capability of improving power transmission, improving voltage profile, minimizing power losses, etc. This paper presents a review on how FACTS devices are used to provide the maximum relief to the congested line by computation techniques. The proposed paper uses sensitivity index to locate FACTS devices optimally. These computation techniques are used solve the OPF (Optimal Power Flow) problems on various IEEE buses.

scholarly journals Voltage Profile Improvement with Combined UPFC and IPFC Facts Devices: A Review

2020 ◽  
Vol 1 (1) ◽  
pp. 26-30
Author(s):  
Violet Kaswii ◽  
Michael Juma Saulo
Keyword(s):  
Power System ◽  
Power Flow ◽  
Reactive Power ◽  
Voltage Control ◽  
System Stability ◽  
Voltage Profile ◽  
Transmission Systems ◽  
Facts Devices ◽  
Flow Controller ◽  
Power Flow Controller

The interline power flow controller (IPFC) and the unified power flow controller (UPFC) are both advanced types of flexible AC transmission systems (FACTS). These devices can provide the power system with control of voltage, and that of real and reactive power. This paper reviews the literature on UPFC and IPFC FACTS devices in voltage control and covers two main areas of research (i) voltage control using FACTS devices, and (ii) UPFCs / IPFCs and their applications in power systems. FACTs devices are applied in modern power system networks for the purpose of voltage control while at the same time providing enhanced power system stability. Research has shown that their benefits in the long run outweighs their high cost especially when they are optimally sized and located in the power network. Moreover, in the planning of power transmission systems, a Multi-Criteria Decision Making (MCDM) technique can help in the incorporation of both the costs and technical viability. This approach provides techno-economic optimization and at the same time meeting environmental criteria.

scholarly journals Improvement of Transient Stability Using Different-Different FACTS Devices

2020 ◽  
Vol 5 (2) ◽  
pp. 35-37
Author(s):  
Vipin Kumar Pandey ◽  
Dr. Malay S Das ◽  
Dr. Anula Khare
Keyword(s):  
Power System ◽  
Transient Stability ◽  
Electrical Power ◽  
Power Demand ◽  
Electrical Power System ◽  
Industrial Growth ◽  
Voltage Instability ◽  
Facts Devices ◽  
Transfer Capability ◽  
The Stability

Due to increase in population and industrial growth, insufficient energy resources to generate or transmit the power in power system, increase in load causes power demand in the electrical power system. These power demand leads to voltage instability, increase the losses, reduces the power transfer capability and stability of the power system. To overcome this stability problem FACTS devices are optimally located in the power system to examine the stability of the system. To locate the FACTS devices different optimization algorithms are used in order to improve the stability of the electrical power system.

scholarly journals Optimal placement of facts devices to reduce power system losses using evolutionary algorithm

2021 ◽  
Vol 21 (3) ◽  
pp. 1271
Author(s):  
Mahmood Khalid Zarkani ◽  
Ahmed Sahib Tukkee ◽  
Mohammed Jasim Alali
Keyword(s):  
Power System ◽  
Evolutionary Algorithm ◽  
Power Flow ◽  
Reactive Power ◽  
Research Work ◽  
Test System ◽  
Optimal Placement ◽  
Unified Power Flow Controller ◽  
Voltage Profile ◽  
Facts Devices

<p>The rapid and enormous growths of the power electronics industries have made the flexible AC transmission system (FACTS) devices efficient and viable for utility application to increase power system operation controllability as well as flexibility. This research work presents the application of an evolutionary algorithm namely differential evolution (DE) approach to optimize the location and size of three main types of FACTS devices in order to minimize the power system losses as well as improving the network voltage profile. The utilized system has been reactively loaded beginning from the base to 150% and the system performance is analyzed with and without FACTS devices in order to confirm its importance within the power system. Thyristor controlled series capacitor (TCSC), unified power flow controller (UPFC) and static var compensator (SVC) are used in this research work to monitor the active and reactive power of the carried out system. The adopted algorithm has been examined on IEEE 30-bus test system. The obtained research findings are given with appropriate discussion and considered as quite encouraging that will be valuable in electrical grid restructuring.</p>

A Multi-objective Hybrid Heuristic Approach for Optimal Setting of FACTS Devices in Power System Operation

2016 ◽  
Vol 5 (3) ◽  
pp. 120
Author(s):  
Sai Ram Inkollu ◽  
Venkata Reddy Kota
Keyword(s):  
Power System ◽  
Power Flow ◽  
Transmission Loss ◽  
Search Algorithm ◽  
Gravitational Search Algorithm ◽  
Test System ◽  
Optimal Location ◽  
Voltage Profile ◽  
Loss Minimization ◽  
Facts Devices

<p>Improvement of power system performance in terms of increased voltage profile and decreased transmission loss is becoming one of the challenging tasks to the system operators under open access environment. Apart from traditional power flow controlling devices, use of Flexible AC Transmission System (FACTS) devices can give an attractive solution for the operation and control of deregulated power system. The type, size, location and number of FACTS devices are to be optimized appropriately in order to get the targeted benefits. In this paper, two FACTS devices, Thyristor Controller Phase Shift Transformer (TCPST) and Interline Power Flow Controller (IPFC) are selected to obtain the required performance such as improvement of voltage profile and loss minimization. To search the optimal location and optimal rating of the selected FACTS devices, a hybrid algorithm which formulated with Particle Swarm Optimization (PSO) and Gravitational Search Algorithm (GSA) is proposed. At the first step, the optimization problem is solved for finding the optimal location of FACTS devices using PSO with an objective of voltage profile maximization and later GSA is implemented to optimize their parameters with an objective of transmission loss minimization. The proposed method is implemented on IEEE 30-bus test system and from the simulation results it can be proved that this technique is well suited for real-time application.  </p><p align="center"><strong><br /></strong></p>

Optimal location of interline power flow controller in a power system network using ABC algorithm

2013 ◽  
Vol 62 (1) ◽  
pp. 91-110 ◽  
Author(s):  
S. Sreejith ◽  
Sishaj Psimon ◽  
M.P. Selvan
Keyword(s):  
Power System ◽  
Transmission Lines ◽  
Power Flow ◽  
Reactive Power ◽  
Optimal Location ◽  
Voltage Profile ◽  
Optimal Position ◽  
Flow Controller ◽  
Power Flow Controller ◽  
Installation Cost

Abstract This paper proposes a methodology based on installation cost for locating the optimal position of interline power flow controller (IPFC) in a power system network. Here both conventional and non conventional optimization tools such as LR and ABC are applied. This methodology is formulated mathematically based on installation cost of the FACTS device and active power generation cost. The capability of IPFC to control the real and reactive power simultaneously in multiple transmission lines is exploited here. Apart from locating the optimal position of IPFC, this algorithm is used to find the optimal dispatch of the generating units and the optimal value of IPFC parameters. IPFC is modeled using Power Injection (PI) model and incorporated into the problem formulation. This proposed method is compared with that of conventional LR method by validating on standard test systems like 5-bus, IEEE 30-bus and IEEE 118-bus systems. A detailed discussion on power flow and voltage profile improvement is carried out which reveals that incorporating IPFC into power system network in its optimal location significantly enhance the load margin as well as the reliability of the system.

Comparative study of GA & DE algorithm for the economic operation of a power system using FACTS devices

2013 ◽  
Vol 62 (4) ◽  
pp. 541-552
Author(s):  
B. Bhattacharyya ◽  
Vikash Kumar Gupta ◽  
Sanjay Kumar
Keyword(s):  
Power System ◽  
Comparative Study ◽  
System Performance ◽  
Optimal Allocation ◽  
Reactive Power ◽  
Reducing Power ◽  
Electrical Networks ◽  
Voltage Profile ◽  
Facts Devices ◽  
Economic Operation

Abstract The problem of improving the voltage profile and reducing power loss in electrical networks must be solved in an optimal manner. This paper deals with comparative study of Genetic Algorithm (GA) and Differential Evolution (DE) based algorithm for the optimal allocation of multiple FACTS (Flexible AC Transmission System) devices in an interconnected power system for the economic operation as well as to enhance loadability of lines. Proper placement of FACTS devices like Static VAr Compensator (SVC), Thyristor Controlled Switched Capacitor (TCSC) and controlling reactive generations of the generators and transformer tap settings simultaneously improves the system performance greatly using the proposed approach. These GA & DE based methods are applied on standard IEEE 30 bus system. The system is reactively loaded starting from base to 200% of base load. FACTS devices are installed in the different locations of the power system and system performance is observed with and without FACTS devices. First, the locations, where the FACTS devices to be placed is determined by calculating active and reactive power flows in the lines. GA and DE based algorithm is then applied to find the amount of magnitudes of the FACTS devices. Finally the comparison between these two techniques for the placement of FACTS devices are presented.

scholarly journals Planning and Research of Distribution Feeder Automation with Decentralized Power Supply

Electronics ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 362
Author(s):  
Yen-Chih Huang ◽  
Wen-Ching Chang ◽  
Hsuan Hsu ◽  
Cheng-Chien Kuo
Keyword(s):  
Power System ◽  
Power Loss ◽  
Power Grid ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Distributed Energy ◽  
Feeder Automation ◽  
Distributed Generator ◽  
Load Demand ◽  
Power Loss Reduction

The high penetration of distributed generation in distributed energy systems causes the variation of power loss and makes the power grid become more complicated, so this paper takes various types of optimal algorithms into account and simulates the feeder reconfiguration on the IEEE-33 system as well as the Taiwan power system. The simulation verifies linear population size reduction of successful history-based adaptive differential evolution (L-SHADE) and particle swarm optimization (PSO) fitness in different systems and provides the recommended location of distributed energy. The proposed method keeps the voltage bound of 0.95 to 1.03 p.u. of Taiwan regulation. In the IEEE-33 system, we achieved a 52.57% power loss reduction after feeder reconfiguration, and a 70.55% power loss reduction after the distributed generator was implemented and feeder reconfiguration. Under the variation of load demand and power generation of the Taiwan power system, we establish the system models by forecasting one-day load demand. Then, we propose a one-day feeder switch operation strategy by considering the switches’ operation frequency with the reduction of 83.3% manual operation and recommend feeder automation to achieve feeder power loss reduction, voltage profile improvement and get regional power grid resilient configuration.

Sign in / Sign up

Export Citation Format

Share Document