scholarly journals Preheating Of Sunflower Blended Biodiesel for the Improvement of Performance Characteristics of a DI Diesel Engine under Various Loads

2019 ◽  
Vol 8 (6) ◽  
pp. 921-926
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Dynamic Performance ◽  
Direct Injection ◽  
Specific Energy Consumption ◽  
Cetane Number ◽  
Diesel Oil ◽  
Performance Characteristics ◽  
Di Diesel Engine ◽  
And Performance

Due to fast depletion of fuel and for the huge demand of various engine fuels in large sectors and power generation, thse biodiesel which is derived from biological wastes can be a substitute of pure diesel oil. Diesel engine has the benefits of low fuel consumption, high potency, smart economical and dynamic performance. However at the identical time, the diesel engine has high NOx and soot emissions. And these two sorts of emissions provides a trade-off relationship which can bring difficulties to satisfy the necessities of emission rules of NOx and soot. This particular paper primarily reviews regarding using of preheated bio-diesel that contains 20 percentage of pure sunflower oil (biological name-Helianthus annuus) and analyses its performance characteristics for selected blend with completely variable loads. Various experiments were carried out by employing a four stroke single cylinder, direct injection, water cooled diesel engine with suitable specifications. Helianthus oil is mixed with bio diesel for fast burning inside the engine cylinder and by doing so , the Cetane number is quite high that leads to the ignition delay shorter. Therefore the overall content is preheated somewhat in order to lift its temperature so as to boost the burning process. Incorporating to this , it reduces the various emissions such as NOx, CO and smoke capacity by 2% to 3%. Various parameters are required to outline the analysis of combustion and performance characteristics of the test fuel like brake thermal efficiency(BTE),basic specific fuel consumption(BSFC), basic specific energy consumption (BSEC),temperature of the exhaust gas and emissions like NOx, unburn hydrocarbons(HC), carbon monoxide(CO) and smoke were carried out in the specified engine

A Study of the Performance Emission and Combustion Characteristics of a DI Diesel Engine Using Waste Cooking Oil Methyl Ester-Ethanol Blends

2012 ◽  
Author(s):  
R. Anand ◽  
G. R. Kannan ◽  
P. Karthikeyan
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Alternative Fuels ◽  
Direct Injection ◽  
Specific Energy Consumption ◽  
Load Condition ◽  
Waste Cooking Oil ◽  
Cooking Oil ◽  
Di Diesel Engine ◽  
Ethanol Blends

The growing environmental concerns and the depletion of petroleum reserves have caused the development of alternative fuels. Biodiesel and alcohols are receiving increasing attention as alternative fuels for diesel engines due to well oxygenated, renewable fuels. In this study, a single cylinder, naturally aspirated, direct injection diesel engine has been experimentally investigated using ethanol-blended waste cooking oil methyl ester. Various proportion of biodiesel-ethanol blends were used in stability test at the different temperatures from 10 °C to 40 °C in the increment of 10°C. Based on the stability tests and improvement in fuel properties, B90E10 (90% biodiesel and 10% ethanol) and B80E20 (80% biodiesel and 20% ethanol) were selected for this investigation. Test results revealed that the improved engine characteristics with the use of B9E10 especially in comparison with B80E20. Reduction in brake thermal efficiency by 3.8% and slightly higher brake specific energy consumption of 15.1% were observed with B90E10 when compared to diesel at 100% load condition. Carbon monoxide, unburnt hydrocarbon, nitric oxide and smoke emission of B90E10 were reduced by 0.09% by vol., 10 ppm, 187 ppm and 12.9%, respectively compared to diesel. B90E10 exhibited lower peak pressure of 70.5 bar, slightly longer ignition delay of 14.2 °CA, and combustion duration of 43.3 °CA was also observed at 100% load condition.

scholarly journals Performance and Exhaust Gas Emission of Biodiesel Fuel with Palm Oil Based Additive in Direct Injection Compression Ignition Engine

2019 ◽  
Vol 16 (1) ◽  
pp. 6173-6187
Author(s):  
C. B. How ◽  
N. M. Taib ◽  
M. R. A. Mansor
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Palm Oil ◽  
Direct Injection ◽  
Engine Performance ◽  
Compression Ignition ◽  
Exhaust Gas Emission ◽  
And Performance ◽  
Engine Emission ◽  
Emission And Performance

Blending biodiesel in the diesel would increase the tendency of having a high viscosity fuel. For this reason, the addition of a small amount of additives into the blends may improve the engine performance and lead to better fuel consumption. The purpose of this paper is to experimentally investigate the performance and emissions generated by various mixtures of biodiesel and diesel with palm oil based additive in the compression ignition direct injection diesel engine of Yanmar TF90. Experiments were also conducted to identify the ideal biodiesel, diesel and the additive mixture that produces the optimum engine emission and performance. The experiment was conducted by using mixtures that consisted of 10%, 20% and 30% of biodiesel with and without the additives. From the results of the experiments, PB10 with 0.8 ml additives produced the highest braking power and lowest fuel consumption as compared to the diesel and the rest of the biodiesel blends. The presence of biodiesel and additives were found to not only improve the engine performance, but also led to the reduction of carbon emission. Although all the diesel, biodiesel and additive demonstrated low smoke emission with a complete combustion, a slight increase however, was observed in the NOx emission. In conclusion, PB10 is seen as the most ideal blend for diesel engine in terms of providing the most optimum engine emission and performance.

Effects of ethanol addition to biodiesel-diesel oil blends (B7 and B20) on engine emissions and fuel consumption

MRS Advances ◽  
2017 ◽  
Vol 2 (64) ◽  
pp. 4005-4015
Author(s):  
Alex de Oliveira ◽  
Osmano Souza Valente ◽  
José Ricardo Sodré
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Direct Injection ◽  
Diesel Oil ◽  
Anhydrous Ethanol ◽  
Oxides Of Nitrogen ◽  
Gas Temperature ◽  
Oil Blends ◽  
Fuel Burn ◽  
Ethanol Addition

This work investigates a diesel engine operating with different blends of diesel fuel, biodiesel and anhydrous ethanol. Anhydrous ethanol (99.8% purity) was added to diesel oil with 7% (B7) and 20% of biodiesel (B20), with the concentrations of 5% (E5), 10% (E10) and 15% (E15) and 20% (E20). The experiments were conducted on a naturally aspirated, four-stroke, four-cylinder, direct injection 44 kW diesel engine, operating at a constant speed of 1800 RPM and at the fixed load of 27.5 kW to attain the lowest specific fuel consumption (SFC). The results were compared with the standard B7 operation, and showed that ethanol addition (B7E5) reduced up to 7% carbon dioxide (CO2) emissions, associated with the decrease of the cylinder gas temperature, due to the ethanol high latent heat of evaporation, and to the ethanol lower carbon-to-hydrogen ratio and oxygen content. Total hydrocarbons (THC) emissions were reduced up to 14% with ethanol addition (B7E15), indicating higher fuel burn efficiency when ethanol is added to the fuel, as the oxygen available in ethanol molecule improves the burning during combustion. On the other hand, increasing biodiesel content in the fuel from 7% to 20% increased CO2 and THC emissions, both mitigated with the use of ethanol. Carbon monoxide (CO) and oxides of nitrogen (NOX) emissions showed different behavior, depending on ethanol and biodiesel concentration. Both biodiesel and ethanol increased SFC, due to the reduction of fuel lower heating value (LHV), although ethanol addition slightly increased fuel conversion efficiency.

Sign in / Sign up

Export Citation Format

Share Document