scholarly journals Modeling and Simulation of a Tubular Linear Switched Reluctance Actuator

2019 ◽  
Vol 8 (12S2) ◽  
pp. 489-494
Keyword(s):  
Finite Element ◽  
Force Analysis ◽  
Operation Performance ◽  
Element Analysis ◽  
Switched Reluctance ◽  
Nonlinear Force ◽  
And Performance ◽  
And Behavior ◽  
Nonlinear Magnetization

In this paper, 2-D finite element analysis and MATLAB/Simulink software are used to model and simulate the proposed tubular linear switched reluctance actuator. The analysis of the actuator by finite element is essential for determining the magnetization characteristics. The obtained data from the analysis is useful for testing and verifying the machine operation performance and behavior. According to the analysis, when a step current signal of 3A was applied to the actuator, oscillation occurred at beginning of the motion with maximum overshooting of 2mm and settling time of 0.15s. Besides, the force analysis showed there was nonlinear force behavior between - 3.5N and 2N observed from the actuator motion. The saturation and nonlinear magnetization curve of materials causes the nonlinearity characteristics of thrust force and magnetic flux which affect the performance of the actuator. The determination of the characteristics and performance is crucial for the proposed actuator to realize a precision positioning system in the future.

scholarly journals Finite element analysis and performance study of switched reluctance generator

2017 ◽  
Author(s):  
Qianhan Zhang ◽  
Yingjun Guo ◽  
Qi Xu ◽  
Xiaoying Yu ◽  
Yajie Guo
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Performance Study ◽  
Element Analysis ◽  
Switched Reluctance ◽  
And Performance

Determination of collapse moment of different angled pipe bends with initial geometric imperfection subjected to in-plane bending moments

2021 ◽  
pp. 095440622199640
Author(s):  
Manish Kumar ◽  
Pronab Roy ◽  
Kallol Khan
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Circular Cross Section ◽  
Initial Imperfection ◽  
Bend Angle ◽  
Bending Moments ◽  
Element Analysis ◽  
Geometric Imperfection ◽  
Initial Geometric Imperfection

From the recent literature, it is revealed that pipe bend geometry deviates from the circular cross-section due to pipe bending process for any bend angle, and this deviation in the cross-section is defined as the initial geometric imperfection. This paper focuses on the determination of collapse moment of different angled pipe bends incorporated with initial geometric imperfection subjected to in-plane closing and opening bending moments. The three-dimensional finite element analysis is accounted for geometric as well as material nonlinearities. Python scripting is implemented for modeling the pipe bends with initial geometry imperfection. The twice-elastic-slope method is adopted to determine the collapse moments. From the results, it is observed that initial imperfection has significant impact on the collapse moment of pipe bends. It can be concluded that the effect of initial imperfection decreases with the decrease in bend angle from 150∘ to 45∘. Based on the finite element results, a simple collapse moment equation is proposed to predict the collapse moment for more accurate cross-section of the different angled pipe bends.

Determination of Stress Concentration Around an Oblique Hole by a Finite-Element Technique

1983 ◽  
Vol 105 (2) ◽  
pp. 206-212 ◽  
Author(s):  
Hua-Ping Li ◽  
F. Ellyin
Keyword(s):  
Finite Element ◽  
Stress Concentration ◽  
Maximum Stress ◽  
Plate Thickness ◽  
Two Dimensional ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Parametric Studies ◽  
Element Technique

A plate weakened by an oblique penetration of a circular cylindrical hole has been investigated. The stress concentration around the hole is determined by a finite-element method. The results are compared with experimental data and other analytical works. Parametric studies of effects of angle of inclination, plate thickness, and width are performed. The maximum stress concentration factor (SCF) obtained from the finite-element analysis is higher than experimental results, and this deviation increases with the increase of angle of skewness. The major reason for this difference is attributed to the shear-action between layers parallel to the plate surface which cannot be directly included in the two-dimensional elements. An empirical formula is derived which accounts for the shear-action and renders the finite-element predictions in line with experimentally observed data.

Mechanical Design, Additive Manufacturing, and Performance of Equal Volume Metamaterials

2021 ◽  
Author(s):  
Richárd Horváth ◽  
Vendel Barth ◽  
Viktor Gonda ◽  
Mihály Réger ◽  
Imre Felde
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Energy Absorption ◽  
Mechanical Design ◽  
Area Under The Curve ◽  
Cell Number ◽  
Element Analysis ◽  
Cross Sectional ◽  
Unit Cells ◽  
And Performance

Abstract In this paper, we study the energy absorption of metamaterials composed of unit cells whose special geometry makes the cross-sectional area and the volume of the bodies generated from them constant (for the same enclosing box dimensions). After a parametric description of such special geometries, we analyzed by finite element analysis the deformation of the metamaterials we have designed during compression. We 3D printed the designed metamaterials from plastic to subject them to real compression. The results of the finite element analysis were compared with the real compaction results. Then, for each test specimen, we plotted its compaction curve. By fitting a polynomial to the compaction curves and integrating it (area under the curve), the energy absorption of the samples can be obtained. As a result of these investigations, we drew a conclusion about the relationship between energy absorption and cell number.

scholarly journals Determination of the striking distance of a lightning rod using finite element analysis

2016 ◽  
Vol 24 ◽  
pp. 4083-4097 ◽  
Author(s):  
Ab Halim ABU BAKAR ◽  
Alyaa ZAINAL ABIDIN ◽  
Hazlee Azil ILLIAS ◽  
Hazlie MOKHLIS ◽  
Syahirah ABD HALIM ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Element Analysis
Sign in / Sign up

Export Citation Format

Share Document