scholarly journals Variability and Uncertainty Analysis in Value Stream Mapping

2019 ◽  
Vol 8 (12S2) ◽  
pp. 533-538
Keyword(s):  
Lean Manufacturing ◽  
Value Stream Mapping ◽  
Strong Impact ◽  
Food Sector ◽  
Value Stream ◽  
Current State ◽  
Potential Risks ◽  
Tools And Techniques ◽  
A Current

Lately, value stream mapping (VSM) is integrated with tools and techniques that belong to other areas of knowledge such as risk management (RM). It is well known tool in showing the value, value stream and the flow which represents three of lean manufacturing (LM) principles. This integration, gives more benefit in covering two of VSM issues such as considering the variability and uncertainty of production processes. In this paper, a model named variable value stream mapping (V-VSM) that integrates the two was showed, explained and tested. The model helps to generate the VSM in a dynamic way with the identification of current and potential risks. These risks might happen in the future bringing a strong impact on not reaching the main objectives in the defined time and cost. The model has been tested by conducting a case study in food sector. A current state map was built using both models, traditional VSM and VVSM. The results showed the effect of variability and uncertainty on the total cycle time (CT) and lead time (LT) values, where the traditional VSM failed to show it by being a static tool. Comparing the results of both models show the differences in presenting the real state of manufacturing environment..

Lean manufacturing implementation using value stream mapping as a tool

2014 ◽  
Vol 5 (1) ◽  
pp. 89-116 ◽  
Author(s):  
Naga Vamsi Krishna Jasti ◽  
Aditya Sharma
Keyword(s):  
Lean Manufacturing ◽  
Value Stream Mapping ◽  
Process Time ◽  
Inventory Level ◽  
Specific Product ◽  
Content Type ◽  
Value Stream ◽  
Work In Process ◽  
Current State

Purpose – Value stream mapping (VSM) is a lean manufacturing (LM) tool used for analyzing material and information flow on a specific product family. The purpose of this article is to address the importance of VSM in LM environment in an Indian auto components industry. Design/methodology/approach – The case study approach has been used to show the applicability and importance of VSM in an Indian auto components company, in which the current state of manufacturing is mapped with the help of VSM symbols. According to the current state mapping, the study conducted analysis and identifies the area of improvement needed in terms of work in process, lead time and cycle time. The study further implemented kaizen on the current state map and developed future state map while including these kaizens. Findings – The study clearly shows that the VSM brings out the positive impact on process ratio, TAKT time, process inventory level, line speed, total lead and process time and reduced man power. It is helping the company in satisfying their customers with respect to quality, cost and delivery. Research limitations/implications – The main limitation of the study is the confined focus on a single industry. The case should be extended to other industries in order to support the findings and for the purpose of the wider generalization. Practical implications – The results obtained from the study will help other industries and sectors to implement VSM in LM environment. Originality/value – The article deals with a real case study, which shows application of VSM for implementing lean principles.

Productivity Improvement in Plastic Bag Manufacturing through Lean Manufacturing Concepts: A Case Study

2011 ◽  
Vol 110-116 ◽  
pp. 1975-1982 ◽  
Author(s):  
Tahera Yesmin ◽  
Md. Masuduzzaman ◽  
Ahmed Zaheer
Keyword(s):  
Lean Manufacturing ◽  
Value Stream Mapping ◽  
Bottom Line ◽  
Productivity Improvement ◽  
Strategic Issues ◽  
Value Stream ◽  
Strategic Role ◽  
Plastic Bag ◽  
Tools And Techniques

In the fiercely competitive market, productivity improvement always plays a key strategic role in determining bottom-line success for an industry. Being a plastic bag manufacturer, which is widely used as packaging material for apparel industry, the manufacturer belongs to a group of backward linkage industry, which is highly competitive. As such, the company has to focus heavily on three strategic issues: reduction in overall cost, improvement in quality with right assurance scheme, and improvement in productivity with right tools and techniques. This research has been conducted in a large FDI-based plastic bag manufacturing company, a techno-economic consortium of Dutch, China and Bangladesh, and located in the suburban area of Dhaka, the capital of Bangladesh. This research was aimed to focus on these issues along with future guidelines as to how to approach lean manufacturing as a pursuit to achieve the ultimate goal of “near perfection”. All of these improvement efforts are planned around the concepts of lean manufacturing. This involves application of Value-Stream Mapping (VSM) and 5S program.

scholarly journals ANALISIS PEMBOROSAN PRODUKSI PADA ALIRAN PRODUK JALA IKAN KKP MENGGUNAKAN PRINSIP LEAN MANUFACTURING DENGAN METODE VALUE STREAM MAPPING (VSM) DI PT. INDONEPTUNE NET MANUFACTURING

2019 ◽  
Vol 7 (2) ◽  
pp. 79-89
Author(s):  
Henny Henny ◽  
Muhammad Kahfi Hadi Syuhada
Keyword(s):  
Cycle Time ◽  
Delay Time ◽  
Lean Manufacturing ◽  
Value Stream Mapping ◽  
Time Level ◽  
Value Stream ◽  
Current State

  Penelitian ini ditujukan untuk menganalisis pemborosan produksi produk Jala Ikan KKP menggunakan lean manufacturing di PT. Indoneptune Net Manufacturing dengan memetakan aliran produksi dan menganalisisnya menggunakan value stream mapping (VSM). Analisis terhadap pemborosan dengan metode VSM dilakukan karena VSM dapat memetakan aliran informasi dan material dari awal sampai akhir dari value stream pembuatan suatu produk. Sehingga dapat dilihat proses mana saja yang merupakan pemborosan. Adapun VSM yang dibuat adalah current-state VSM karena dapat merepresentasikan kondisi saat ini dari aliran produksi yang ada. Hasil yang didapatkan setelah dibuat current-state VSM adalah aliran produksi produk jala Ikan KKP melewati proses spinning, ring roupe, netting dan finishing yang memiliki sub-sub proses yang berbeda. Dari setiap sub-proses tersebut dipetakan nama proses, jumlah waktu cycle time dan changeover time, level inventory, waktu kerja tersedia dan jumlah operator. Penganalisisan pemborosan dilakukan pada setiap sub-proses untuk dapat mengetahui nilai tambah proses tersebut terhadap produk utama yang sedang dikerjakan pada setiap tahapan proses yang berlangsung. Kesimpulan yang didapat yaitu pemborosan yang terjadi di departemen spinning salah satunya adalah delay time karena persiapan sebelum proses peleburan, waktu tunggu karena persiapan proses twist di departemen ring roupe, transportasi berlebih sebelum proses tatekan dan pengerjaan ulang di hoshu 2 di departemen finishing.

scholarly journals MEMINIMASI PEMBOROSAN DENGAN LEAN MANUFACTURING PADA PROSES PRODUKSI DI PT. IE

2021 ◽  
pp. 1451
Author(s):  
Ahmad Ahmad ◽  
Helena JK ◽  
Andrean Yonathan
Keyword(s):  
Waiting Time ◽  
Cycle Time ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Fault Tree Analysis ◽  
Value Stream Mapping ◽  
Tree Analysis ◽  
Value Stream ◽  
Current State ◽  
Future State

PT. IE is engaged in the business of making Lighting and Lampposts. Based on observations and interviews, there are still some wastes that arise in the flow of the production process, among which there are still many wastes of waiting time, transportation, movement and inventory. These wastes cause the product completion time to be longer and the resulting quality decreases. To eliminate or reduce waste, it is necessary to apply Lean Manufacturing. Lean Manufacturing is a systematic approach to eliminating waste and changing processes by identifying and reducing waste with continuous improvement and striving to create a production flow along the value stream by eliminating all forms of waste and increasing the added value of products to customers. From the Pareto diagram, it is found that transportation waste has the highest percentage of 26.21%, waiting time is 21.38%, motion waste is 19.31% and waste inventories are 15.17%. while the results of the Value Stream Mapping Current State Map mapping obtained a production lead time of 7,680 seconds and a total cycle time of 6,660 seconds and a PCE Current State Map value of 53.09%. Identify the root causes of waste using Fishbone diagrams, 5 Why Analysis, 5W+1H, Fault Tree Analysis and FMEA. After corrective actions have been taken, based on the Value Stream Mapping Future mapping there is a decrease in production lead time to 5,220 seconds and a decrease in total cycle time to 4,860 seconds and an increase in PCE Future State Map to 68.10% so that there is an increase of 15.01% which shows The company's production process has become more Lean.PT. IE bergerak dalam bisnis pembuatan Lighting dan Tiang Lampu. Berdasarkan observasi dan wawancara, masih terdapat beberapa pemborosan (waste) yang timbul di aliran proses produksi di antaranya masih banyak terjadi pemborosan-pemborosan waktu tunggu, transportasi, gerakan dan inventori. Pemborosan-pemborosan tersebut menyebabkan waktu penyelesaian produk menjadi lebih lama dan kualitas yang dihasilkan menurun. Untuk menghilangkan atau mengurangi pemborosan diperlukan adanya penerapan Lean Manufacturing.Lean Manufacturing merupakan pendekatan sistematik untuk mengeliminasi pemborosan dan mengubah proses dengan cara mengidentifikasi dan mengurangi pemborosan dengan perbaikan kontinu dan berupaya untuk menciptakan aliran produksi sepanjang value stream dengan menghilangkan segala bentuk pemborosan serta meningkatkan nilai tambah produk kepada pelanggan. Dari diagram Pareto ditemukan waste transportasi memiliki persentase paling tinggi sebesar 26,21%, waktu tunggu  21,38%, waste motion 19,31% dan waste inventories 15,17%. sedangkan hasil pemetaan Value Stream Mapping Current State Map diperoleh production lead time selama 7.680 detik dan total cycle time selama 6.660 detik serta nilai PCE Current State Map sebesar 53,09%. Identifikasi akar permasalahan pemborosan menggunakan diagram Fishbone, 5 Why Analysis, 5W+1H, Fault Tree Analysis dan FMEA. Setelah dilakukan tindakan–tindakan perbaikan, berdasarkan pemetaan Value Stream Mapping Future ada penurunan production lead time menjadi 5.220 detik dan penurunan total cycle time menjadi 4.860 detik serta ada peningkatan PCE Future State Map menjadi 68,10% sehingga ada peningkatan 15,01% yang menunjukan proses produksi perusahaan telah menjadi lebih Lean.

Efficiency Enhancement in a Medium Scale Gearbox Manufacturing Company through Different Lean Tools - A Case Study

2018 ◽  
Vol 34 ◽  
pp. 128-138 ◽  
Author(s):  
V. Saravanan ◽  
S. Nallusamy ◽  
Abraham George
Keyword(s):  
Lean Manufacturing ◽  
Processing Time ◽  
Assembly Line ◽  
Value Added ◽  
Value Stream Mapping ◽  
Productivity Improvement ◽  
Medium Scale ◽  
Value Stream ◽  
Manufacturing Company

Productivity is an important parameter for all small and medium scale manufacturing industries. Lean manufacturing emerged as production strategy capable of increasing productivity by identifying and eliminating non value added activities. This article deals with productivity improvement in a pre-assembly line of gearbox manufacturing company with a case study using lean concepts like process flow chart, process Gantt chart and time study. This paper illustrates using a case study on how a value stream mapping has to be carried out in a planet carrier pre-assembly line. Value stream mapping and work standardization are the key tools used in lean manufacturing and lean transformation. It makes the process smoother, helps in reduction of lead time and ultimately increasing the productivity. From the observed results it was found that, the productivity has been increased from 7 pieces to 10 pieces in the first step assembly when the proposed VSM was implemented. The second step processing time was reduced by the execution of proposed value stream mapping with TAKT time of 126 minutes and 165 minutes of processing time for demand of 10 pieces were achieved and the overall processing time has been reduced by about 24%.

scholarly journals LEAN SIX SIGMA: MULTIPLE CASE STUDY

2018 ◽  
Vol 9 (1) ◽  
pp. 74
Author(s):  
Orlando Roque Da Silva ◽  
Alessandro Marco Rosini ◽  
Arnoldo J H Guevara ◽  
Angelo Palmisano ◽  
Delvio Venanzi
Keyword(s):  
Six Sigma ◽  
Lean Manufacturing ◽  
Lean Six Sigma ◽  
Value Stream Mapping ◽  
Exploratory Research ◽  
Value Stream ◽  
Multiple Case ◽  
Mapping Techniques ◽  
And Control

Lean Six Sigma is a management focused on quality and productive performance in operating systems. This article discusses the foundations of this methodology through of two different conceptions of management, Lean Manufacturing and Six Sigma. First of the article explain the DMAIC (define measure, analyze, improve and control) and their respective phases, after the Lean philosophy with the sipoc and value stream mapping techniques. The article aims to show integration of these two conception and their results. The methodology consisted in a theory was based on a literature search an exploratory research which consisted of three case studies in differences companies located in Sorocaba, São Paulo. In this article studies the applying of Lean Six Sigma and its results.

scholarly journals WASTE ELIMINATION USING VALUE STREAM MAPPING AND VALSAT

2017 ◽  
Vol 3 (2) ◽  
Author(s):  
Dion Avellino Suyanto ◽  
Sunday Noya
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Current State ◽  
Future State ◽  
Analysis Tools ◽  
Fierce Competition ◽  
Cycle Efficiency ◽  
Working Efficiency

Fierce competition encourages companies to make continuous improvements to achieve better working efficiency. One method to improve the working efficiency is using the concept of lean manufacturing. The efficiency of the existing work in PT. Rimba Kencana is still not good because there are many processes that are not uniform and because of that, production lead time is increased. By using value stream mapping and value stream analysis tools (VALSAT), the production processes in the company are mapped into the current state mapping and future state mapping. In the current state mapping, the total value of production lead time is 59.49 days and the value of process cycle efficiency (PCE) is 0.013%. After doing improvement on welding department, the total value of production lead time decreased to 48.22 days and the value of process cycle efficiency becomes 0.016%. Keywords: Efficiency, Value Stream Mapping, Value Stream Analysis Tools

Design of Simulation Tools for Trainig Programs in Lean Manufacturing

2006 ◽  
Author(s):  
Alok Verma ◽  
Jyotsna Devulapalli
Keyword(s):  
Lean Manufacturing ◽  
Physical Simulation ◽  
Value Stream Mapping ◽  
Pull System ◽  
Simulation Tools ◽  
Value Stream ◽  
Current State ◽  
Future State ◽  
Simulation Based ◽  
Learn By Doing

A physical simulation based activity in the form of a board game has been developed to explain the concepts of Value Stream Mapping (VSM) and analysis. The activity explains the basic concepts of Value Stream Mapping, drawing of the Current state map, development of Future state map, and implementation of the future state. Simulation activity is run in three phases and the results of implementing various lean tools are observed. Effects of various tools like the Supermarket, Kanban, and Pull system are observed in a learn-by-doing environment. This simulation activity can be used to compliment training programs in Lean manufacturing.

scholarly journals Lean Manufacturing Applications in the Manufacturing Industry

2018 ◽  
Vol 220 ◽  
pp. 02005
Author(s):  
Abdillah Arif Nasution ◽  
Ikhsan Siregar ◽  
Anizar ◽  
Tigor Hamonangan Nasution ◽  
Khalida Syahputri ◽  
...  
Keyword(s):  
Lean Manufacturing ◽  
Manufacturing Industry ◽  
Value Added ◽  
Added Value ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Mapping Analysis ◽  
Manufacturing Applications ◽  
Study Application

This research was conducted in manufacturing industry, so this research is based on case study application. This research serves to reduce waste in the industry when making a product. This study categorizes value-added work and which work has no added value. And it is measurable and has value, so it can be evaluated in the future. Later this will be poured or depicted on a map called Value stream mapping. This is a tool from Lean Manufacturing. Lean manufacturing is useful for analysing and reducing non value-added activities, value stream mapping analysis tools, 5L1H process mapping activities, and 5 why tools. From the results of this study obtained the efficiency of the process cycle and total estimation of the improvement of the lead time. This calculation can be an evaluation material for the company.

Sign in / Sign up

Export Citation Format

Share Document