scholarly journals A Python-Based Interface Design for Electric Power System Education.

Author(s):  
Yousef Marwan Alkhanafseh ◽  
Tahir Cetin Akinci

Python, which is widely used today, is one of the open-source programming languages. In the Python program, its interface is done through the PyQt5 library. With PyQt5, it is possible to develop object-based software that takes up less space on the disk and runs faster. In this study, an educational calculation and analysis program (ITUPSA) was designed for the Electric power systems course using the Python interface. Electric power systems are one of the fundamental courses in electrical engineering. This main course is taught in three sub-course groups as energy transmission-distribution, energy flow and energy economy. The energy transmission-distribution course package constitutes the first and most comprehensive part of the electric power systems group. In the energy transmission-distribution, the creation of the transmission line model and the calculation of the line parameters form an important part of the training. This section contains very detailed mathematical calculations and it is very important that students get the correct result as a result of these calculations. This can be possible with a lot of practice. The interface design was made by students and faculty to teach practical examples correctly. This developed (ITUPSA) python-based interface program is very suitable for calculation and analysis exercises in both undergraduate and graduate courses in the Electrical Engineering department. The purpose of this study is to create a python-based interface in order to solve the problems related to these lines, to make the types of short, medium and long power transmission lines correct and understandable. In the study, after selecting the type of energy transmission line and all parameters related to the line, the necessary mathematical analysis can be made and also the analysis results can be plotted. The analysis program is available in two languages, English and Turkish.

2014 ◽  
Vol 2014 ◽  
pp. 1-13
Author(s):  
Agustín Flores ◽  
Eduardo Quiles ◽  
Emilio García ◽  
Francisco Morant ◽  
Antonio Correcher

This work proposes a new method for fault diagnosis in electric power systems based on neural modules. With this method the diagnosis is performed by assigning a neural module for each type of component comprising the electric power system, whether it is a transmission line, bus or transformer. The neural modules for buses and transformers comprise two diagnostic levels which take into consideration the logic states of switches and relays, both internal and back-up, with the exception of the neural module for transmission lines which also has a third diagnostic level which takes into account the oscillograms of fault voltages and currents as well as the frequency spectrums of these oscillograms, in order to verify if the transmission line had in fact been subjected to a fault. One important advantage of the diagnostic system proposed is that its implementation does not require the use of a network configurator for the system; it does not depend on the size of the power network nor does it require retraining of the neural modules if the power network increases in size, making its application possible to only one component, a specific area, or the whole context of the power system.


2019 ◽  
Vol 24 ◽  
pp. 02012
Author(s):  
Yury Shornikov ◽  
Evgeny Popov

Transients in electric power systems are of great interest to power engineers when designing a new or maintaining an existing system. The paper deals with using hybrid system theory for modeling and simulation of an electric power system with controllers. The presented technique is rather convenient and recommended as mathematical models of transients in electric power systems with controllers in general contain both continuous and discrete components. The modeling and simulation were carried out in the modeling and simulation environment ISMA, which is briefly presented in the paper.


2021 ◽  
Vol 286 ◽  
pp. 02009
Author(s):  
Ivaylo Nedelchev ◽  
Hristo Zhivomirov ◽  
Yoncho Kamenov

The renewable energy take part in the most of the electric power systems in the modern world. The part of this type of energy in the global electric power system, as well as in the local scale, increases with the setting the stricter requirements for decreasing the level of the carbon dioxide emissions. This is the result of the newest international conventions and decision for saving the nature. By these conditions, the electric power systems are forced to work with more different types of energy sources: wind power, photovoltaic, biomass plants etc. Switching of such miscellaneous power sources, leads to complicated transient processes, which are developed due to specific electrical parameters, especially harmonic components, of the synchronous generators, photovoltaic and wind power plants. This paper represents data from measurements of the transient processes into the physical model of the electric power system with predominant part of renewable energy and assesses the applicability of the model. For conducting this study, the multichannel DAQ measurement system is used.


Author(s):  
Azriyenni Azriyenni ◽  
Mohd Wazir Mustafa

The techniques hybrid intelligent was introduced in transmission protection that usage in electric power systems. There was applied ANFIS for distance relay protection particularly for transmission line. If a fault occurs during the transmission line identification caused by unwanted fault thus the power delivery to the consumer becomes not going well. Therefore, it would need to provide an alternative solution to fix this problem. The objective of this paper uses impedance transmission line to determine how long the channel spacing will be protected by distance relay. It has been distance relays when fault occurs in transmission line with the application Sugeno ANFIS. The simulation shows it excellent testing results can be contributed to an alternate algorithm that it has good performance to protecting system in transmission line. This application used by using software Matlab.


Author(s):  
Dmitry Iakubovsky ◽  
◽  
Dmitry Krupenev ◽  
Denis Boyarkin ◽  
◽  
...  

A steady trend towards the development of electric power systems leads to their continuous enlargement and sophistication. As a result, new ways of their control appear. In this regard, the existing models and complexes for adequacy assessment may work inadequately and ineffectively in terms of the obtained results adequacy. To assess the current state of the existing models and complexes, we reviewed and analyzed the domestic and foreign software and computer systems. In particular, we considered mathematical models of minimizing the power shortage. This work is based on the problem of modifying mathematical models of minimizing the power shortage used in adequacy assessment of the electric power systems of one of the complexes under consideration. As a modification of mathematical models, it is proposed to exclude the existing method of using the line capacities and start use correct accounting for the maximum permissible active power flow in controlled sections. The experimental part reflected in the paper concerns the testing of options for models to minimize the power shortage, as well as the proposed modifications on various systems, including those consisting of three and seven reliability zones with a variable number of controlled sections and power lines included in them. The results of the study have shown that the proposed modifications are efficient and can be used in the future. The authors also obtained the most adequate results in terms of the physical laws of electric power system operation due to the model of minimizing the power shortage with quadratic losses which takes into account the limitations of power transmission over controlled sections.


Author(s):  
Geetha R ◽  
Gowdhamkumar S ◽  
Yamuna ` R ◽  
S Jambulingam

Modern society has reached a point where virtually every crucial economic and social function depends on the secure and reliable operation of the electrical power and energy infrastructures. The energy consumption growth and the population growth are pushing world’s total energy consumption to double by 2050. This represents grand challenges and opportunities for power electronics and electric power systems engineers to modernize the power grid. Power electronics & systems (PEAS) technology is increasingly important for smarter distributed systems, particularly for power grid modernization. This paper discussed smart technology solutions, such as PEAS, for the changing nature of the electric power system. Specific technical challenges that are facing the power electronics and electric power systems communities are then elaborated. It is shown that we can meet the grand energy challenge by lever-aging the grid modernization efforts. To provide electric power to twice as many people does not have to increase the required environment footprint.


2019 ◽  
Vol 10 (1) ◽  
pp. 35-41
Author(s):  
Dwi Ajiatmo ◽  
Imam Robandi ◽  
Machrus Ali ◽  
Betta Aidya Suroya

Short circuit is one type of interference that often occurs in electric power systems. The interference if it lasts a long time will affect the quality and continity of electrical power distribution as well as the reliability and safety of the equipment on the system. To minimize the possibility of interference and to minimize the consequences caused by interference, an analysis of disturbances in the electric power system is needed. This study discusses the classification and analysis of disturbances in the electric power system. The type of interference in the electric power system is classified into two, namely symmetry and non-symmetrical interference. Symmetry disturbances are three phase disturbances which are described by the equation of the sequence of the symmetry component system. Sequence equations from the symmetry component system are positive sequence equations, negative sequence equations, and zero sequence equations. Non-symmetrical interference is a disorder that often occurs in electric power systems, namely the interference of one network to the ground, network interference to the network and interference of two networks to the ground. This research is to classify and to analyze the types of disturbances in the Java-Bali electric power system 500 kV 20 buses in the form of a single line diagram, using Power World Simulator and ETAP Software applications. The simulation results are calculated and display the simulation design of the power system with the tools contained in the program.


2019 ◽  
Vol 139 ◽  
pp. 01009
Author(s):  
Murodilla Mukhammadiev ◽  
Boborakhim Urishev ◽  
Shirin Esemuratova ◽  
Nigina Djumaniyozova

This article deals with the analysis and development perspectives of the use pumped storage power plants use to increase the reliability and regime controllability of electric power systems of the Republic of Uzbekistan.


2019 ◽  
Vol 114 ◽  
pp. 03006
Author(s):  
Natalia Aizenberg ◽  
Sergey Perzhabinsky

We propose the new model of generation adequacy optimization. Optimization criterion is a maximum of social welfare. Social welfare consists of profits of generating companies, consumer surplus, costs for development and servicing of electrical grids. In the article we present a review of existed methods of adequacy level management in liberalized electric power systems. Optimization of adequacy level is based on analysis of variants of development of the electric power system. For adequacy analysis of the variants of development we multiple estimate the electricity shortage in random hours of the system work. Analysis of the system work in every random hour is realized in two stages. At first we define values of equilibrium electricity demand in every system node and equilibrium price of electricity according to Cournot model. We consider only electricity market in the model. At the next stage we simulate failures of power generating equipment and transmission lines. The electricity shortage in a current hour is estimated on the second stage. After a whole cycle of analysis, we compute reliability indexes and profits of generating companies. Profits of generating companies are depended on the reliability of the electricity supply. The simulations of random values are based on Monte Carlo method.


Sign in / Sign up

Export Citation Format

Share Document