scholarly journals Performance analysis and modeling of parabolic trough based concentrated solar facility using different thermal fluid mediums

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Ahmed Ullah ◽  
◽  
Asim Mushtaq ◽  
Rizwan Ahmed Qamar ◽  
Zaeem Uddin Ali ◽  
...  
Keyword(s):  
Solar Energy ◽  
High Efficiency ◽  
Solar Power ◽  
Operating Conditions ◽  
Design Parameters ◽  
Small Scale ◽  
Concentrated Solar Power ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
Thermal Fluids

The significance of sustainable power source has expanded because of environmental change and worldwide cautioning concerns because of its renewing quality. Solar energy is the focal point of numerous examinations due to modern industrial applications and small scale local applications in emerging nations. Solar energy is being bridled, either specifically utilizing photovoltaic or secondarily utilizing concentrated solar power. This study aims to design and fabricate a small scale concentrated solar power (CSP) plant using linear parabolic trough. Linear parabolic trough collector is used because of high efficiency and exceedingly prescribed kind of CSP. The scope of this study is to develop a CSP plant and also study the properties of various thermal fluids and expect the best transfer medium. The study done in this research is based on carrying out a detailed energy balance scheme for a linear parabolic trough collector while observing twenty-six vital design parameters, including the geometric measurements and material properties of concentrator and receiver pipe, thermal fluids properties, and operating conditions. Modeling of the system is carried out for different thermal fluids that are deemed viable for use. It was found that the results obtained from the fabricated parabolic trough CSP were used to verify the model and compare with the theoretical results. The conclusions deduced from this study will help design both small and large scale applications of linear parabolic troughs.

scholarly journals Design of a parabolic trough concentrated solar power plant in Al-Khobar, Saudi Arabia

2020 ◽  
Vol 160 ◽  
pp. 02005
Author(s):  
Wael Al-Kouz ◽  
Jamal Nayfeh ◽  
Alberto Boretti
Keyword(s):  
Saudi Arabia ◽  
Energy Storage ◽  
Power Plant ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Solar Power ◽  
Small Scale ◽  
Solar Power Plant ◽  
Concentrated Solar Power ◽  
Parabolic Trough

The paper discusses the design options for a concentrated solar power plant in Al-Khobar, Saudi Arabia. The specific conditions, in terms of weather and sun irradiance, are considered, including sand and dust, humidity, temperature and proximity to the sea. Different real-world experiences are then considered, to understand the best design to adapt to the specific conditions. Concentrated solar power solar tower with thermal energy storage such as Crescent Dunes, or concentrated solar power solar tower without thermal energy storage but boost by natural gas combustion such as Ivanpah are disregarded for the higher costs, the performances well below the design, and the extra difficulties for the specific location such as temperatures, humidity and sand/dust that suggest the use of an enclosed trough. Concentrated solar power parabolic trough without thermal energy storage such as Genesis or Mojave, of drastically reduced cost and much better performances, do not provide however the added value of thermal energy storage and dispatchability that can make interesting Concentrated solar power vs. alternatives such as wind and solar photovoltaic. Thus, the concentrated solar power parabolic trough with thermal energy storage of Solana, of intermediate costs and best performances, albeit slightly lower than the design values, is selected. This design will have to be modified to enclosed trough and adopt a Seawater, Once-trough condenser. Being the development peculiar, a small scale pilot plant is suggested before a full-scale development.

scholarly journals Economics of an Additive Manufactured Heat Exchanger for Concentrating Solar Power

2022 ◽  
Author(s):  
Tracey Ziev ◽  
Erfan Rasouli ◽  
Ines Noelly-Tano ◽  
Ziheng Wu ◽  
Srujana Yarasi Rao ◽  
...  
Keyword(s):  
High Efficiency ◽  
Solar Power ◽  
Cost Model ◽  
Low Cost ◽  
Operating Conditions ◽  
Concentrated Solar Power ◽  
Future Technologies ◽  
The Cost ◽  
Alternative Current ◽  
The Impact

Developing low cost, high efficiency heat exchangers (HX) for application in concentrated solar power (CSP) is critical to reducing CSP costs. However, the extreme operating conditions in CSP systems present a challenge for typical high efficiency HX manufacturing processes. We describe a process-based cost model (PBCM) to estimate the cost of fabricating an HX for this application using additive manufacturing (AM). The PBCM is designed to assess the effectiveness of different designs, processes choices, and manufacturing innovations to reduce HX cost. We describe HX design and AM process modifications that reduce HX cost from a baseline of$780/kW-thto$570/kW-th. We further evaluate the impact of alternative current and potential future technologies on HX cost, and identify a pathway to further reduce HX cost to$270/kW-th.

scholarly journals An Analysis of the Effect of Molten Salt Thermal Storage on Parabolic Trough Concentrated Solar Power Plant Efficiency

2015 ◽  
Vol 2 ◽  
pp. 3-13
Author(s):  
Christopher Hickin ◽  
Henry Li ◽  
Sharnan Kemp
Keyword(s):  
Solar Energy ◽  
Theoretical Analysis ◽  
Molten Salt ◽  
Power Plants ◽  
Solar Power ◽  
Renewable Energy Sources ◽  
Operating Time ◽  
Concentrated Solar Power ◽  
Parabolic Trough ◽  
Temperature Range

In the development of renewable energy sources, there has been a trend toward increasing and stabilising the power output of Concentrated Solar Power Plants (CSPPs) during times of reduced solar resource through the use of Thermal Energy Storage Devices (TESDs). This study investigates whether the use of a molten salt TESD decreases the efficiency of a parabolic trough CSPP due to additional system energy losses despite prolonging the operational time of the CSPP. A theoretical analysis of a simplified CSPP was made to determine if a TESD would impact the efficiency of the CSPP. This was followed up by a survey of currently active parabolic trough CSPPs both with and without molten salt TESDs. The theoretical analysis illustrated that a TESD would have no effect on the efficiency of a CSPP. However, the survey revealed that the use of a TESD improved the efficiency of a CSPP. The results of the study don't support the theoretical analysis or the hypothesis suggesting that a property has been overlooked. This property is most likely to be that generators tend to operate best within a certain temperature range, and in a CSPP the optimum temperature range cannot be maintained. This results in a generator being selected capable of operating for the longest period with the lowest amount of excess solar energy. When a TESD is implemented, the excess solar energy is stored for later use, prolonging the generator's running time and increasing the useable energy. The realisation of the ability of a TESD to increase the efficiency of a CSPP as well as extending its operating time shows a promising area of development in CSPP technology and increasing its application in electricity generation.

scholarly journals Energetic & exergetic analysis of a parabolic trough: concentrated solar power plant

2021 ◽  
pp. 19-30
Author(s):  
Mohit Nagpal ◽  
Rajesh Maithani ◽  
Suresh Kumar
Keyword(s):  
Power Plant ◽  
Solar Power ◽  
Design Parameters ◽  
Operating Parameters ◽  
Solar Power Plant ◽  
Concentrated Solar Power ◽  
Parabolic Trough ◽  
Energy And Exergy ◽  
Exergetic Analysis ◽  
Lower Temperature

Solar energy is the most affordable source of energy. Parabolic trough systems are used to concentrate and extract heat, therefore it’s very significant to analyse its performance in terms of energy and exergy. Exergy based analysis of the system ensures the eradication of losses, resulting in the yield of energy of the highest quality. In this paper, an investigation has been carried out using numerical simulation with an objective of analysis of Parabolic Trough Collectors on the basis of energy and exergy. Detailed second law analysis has been performed by varying the system and operating parameters through computer simulation. Exergy output has been determined by analysing the effect of major system parameters, namely, mirror reflectivity, glass transmissivity, absorptivity, the diameter of glass envelop, and the receiver. The operating parameters considered in the investigation are insolation and temperature rise parameters. The extensive investigation of the parabolic trough of a concentrated solar power plant for various design parameters in the range of operating parameters reveals that it is beneficial to operate the system at higher temperature as opposed to the preference of the operating system at lower temperature from purely thermal considerations.

Developments in High Temperature Parabolic Trough Receiver Technology

Solar Energy ◽  
2004 ◽  
Author(s):  
Henry Price ◽  
Mary Jane Hale ◽  
Rod Mahoney ◽  
Carin Gummo ◽  
Robert Fimbres ◽  
...  
Keyword(s):  
High Temperature ◽  
Solar Energy ◽  
High Efficiency ◽  
Failure Rates ◽  
Significant Issue ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
Selective Coating ◽  
Linear Receiver ◽  
Glass Envelope

The parabolic trough linear receiver is one of the primary reasons for the high efficiency of the Luz parabolic trough collector design used at the Solar Energy Generating Systems (SEGS) plants. Experience from the SEGS plants has shown that the reliability and lifetime of the parabolic trough receiver tube is the most significant issue for existing and future parabolic trough plants. Although highly efficient, the original Luz receiver tubes experienced high failure rates (approximately 4% to 5% per year). Failures included vacuum loss, glass envelope breakage, and degradation of the selective coating. This paper reviews receiver failure rates, the primary failure causes at two of the SEGS plants, and discusses receiver technology developments during the last several years that focus on improving the reliability of parabolic trough receivers. Data are provided on the performance and reliability of a new commercially available trough receiver.

scholarly journals The efficiency of steam production by the Parabolic Trough Collector PTC with the use of nanofluids in the region of Ouargla

2021 ◽  
Vol 1204 (1) ◽  
pp. 012005
Author(s):  
Intissar Achouri ◽  
Mouhamed Elbar Soudani ◽  
Tlili Salah
Keyword(s):  
Thermal Efficiency ◽  
Power Plants ◽  
Solar Power ◽  
Production Capacity ◽  
Fluid Temperature ◽  
Concentrated Solar Power ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
Solar Power Plants ◽  
Concentrated Solar Power Plants

Abstract Concentrated solar power plants (CSP) contribute to global production (at present) with a capacity of 400 MW, and by 2020 they will reach approximately 20 GW, then nearly 800 GW by 2050, This will prevent the emission of 32 million tons of CO2 annually in 2020, and rise to 1.2 billion tons in 2050, according to the International Greenpeace “Solar Thermal Electricity” 2016 report. Among all the concentrated solar power (CSP) technology available to date, Parabolic Trough Collector (PTC) is the most promising, cost-effective, and efficient solution to generating electrical power, as PTC plants contribute in terms of global production capacity by 73.58% of the overall capacity of concentrated solar power plants (CSP). PTC stations in the production of electricity depend on the generation of hot and pressurized steam that rotates the turbines and to increase the effectiveness of PTC in the production of steam, we use in this study nanofluids by adding copper nanomaterials in different proportions to improve the Thermal efficiency of PTC. We also studied the effect of the width of the PTC slot on the fluid temperature. And from it on the amount of steam produced. The results of the study showed that the Thermal efficiency increases with the increase in the ratio of copper nanomaterials in the water, as the temperature of outlet water reaches 98°C, for the ratio of nanomaterials, 20%, in order to water flow 0.01 Kg/s and display the aperture 3.5 m.

Performance Enhancement of Solar Parabolic Trough Collector Using Intensified Ray Convergence System

2017 ◽  
Vol 867 ◽  
pp. 191-194
Author(s):  
Anbu Manimaran Sukanta ◽  
M. Niranjan Sakthivel ◽  
Gopalsamy Manoranjith ◽  
Loganathan Naveen Kumar
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Performance Enhancement ◽  
Solar Flux ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
Chrome Coating ◽  
Convergence System ◽  
And Performance

Solar Energy is one of the forms of Renewable Energy that is available abundantly. This work is executed on the enhancement of the performance of solar parabolic trough collector using Intensified Ray Convergence System (IRCS). This paper distinguishes between the performance of solar parabolic trough collector with continuous dual axis tracking and a fixed solar parabolic trough collector (PTC) facing south (single axis tracking). The simulation and performance of the solar radiations are visualized and analyzed using TRACEPRO 6.0.2 software. The improvement in absorption of solar flux was found to be enhanced by 39.06% in PTC using dual axis tracking, absorption of solar flux increases by 52% to 200% in PTC receiver using perfect mirror than PTC using black chrome coating.

Sign in / Sign up

Export Citation Format

Share Document