scholarly journals Reuse of alum sludge for reducing flocculant addition in water treatment plants

2019 ◽  
Vol 45 (1) ◽  
Author(s):  
PAULO S. SCALIZE ◽  
LEONORA M. D. SOUZA ◽  
ANTONIO ALBUQUERQUE
1994 ◽  
Vol 29 (4) ◽  
pp. 571-580
Author(s):  
Jose M. Azcue ◽  
Olaf Malam ◽  
Wolfgang G. Pfeiffer

Abstract The effect of the extended use of alum on the concentration of aluminum in water treatment was investigated. Water from the Paraiba do Sul-Guandu River (PSR-GR) system, collected after conventional treatment, was analyzed from the six water treatment plants (WTPs). One of the WTPs, the Guandu WTP, supplies water to the city of Rio de Janeiro (11 million inhabitants) with a flow of 40 m3/s. The concentrations of aluminum found were near and sometimes over the values recommended by the World Health Organization (200 µg/L), with an average concentration of 306 µg/L, reaching seasonally maximum values of 877 µg/L at the WTP and 2,100 µg/L in household taps. The discharge of alum sludge back to the river system is the predominant pathway in the aluminum cycling in the study area, followed by sedimentation and enhanced availability to the biota.


2012 ◽  
Vol 1380 ◽  
Author(s):  
F. Espejel-Ayala ◽  
R. M. Ramírez Z.

ABSTRACTThe present work describes a patent applied for registration at the IMPI (Instituto Mexicano de la Propiedad Industrial) of a production process of zeolite X using as raw materials alum sludges issued from drinking water treatment plants. Sludge sample was collected in a water drinking plant located northern Mexico City. The sample was dried and then physicochemical and microbiological analyses were carried out (metal content, main oxides content, mineralogical analysis, helminth eggs content, fecal coliforms). In accordance with its characterization, two main steps of the zeolites production process were performed: 1) alkaline fusion of alum sludge-NaOH mixture for increasing the dissolved precursor’s content and 2) alkaline hydrothermal treatment. Spherical particles of zeolite X were identified by SEM and XRD respectively. The best synthesized zeolite showed a CEC=2.11 meq/g, value being similar to the data reported for clinoptilolite (the most commonly zeolite used for water treatment in the removal of heavy metals). Thus, the synthesized zeolite X in this work can be used for the same purpose.


2019 ◽  
Vol 7 (2A) ◽  
Author(s):  
Adriana Muniz De Almeida Albuquerque

The water purification procedure aims to obtain a product appropriate for human consumption, minimizing the presence of contaminants and toxic substances present in the water. Among these contaminants, some radionuclides of natural origin, such as uranium, thorium and their descendants, have been identified. Studies have shown that the stages of purification are quite effective in removing the radionuclides contained in water. The removal is due to co-precipitation of the radionuclides with the suspended materials and the precipitated material is accumulated and characterized as a Technologically Concentrated Natural Occurrence Radioactive Material (TENORM) by the United States Environmental Protection Agency (USEPA). This residue can present significant levels of radioactivity and, when discarded in the environment without any treatment, can generate a problem of environmental impact and a risk to the health of the population. In this way, some gamma emitters of the series of U, Th and the K-40 were determined in the residues generated at the Potable Water Treatment Plants – PWTPs in six municipalities of Pernambuco. The results obtain corroborate the classification of the residues generated in the PWTPs as concentrators of the radioactive components contained in the water supplied to the system and reinforce the need for the release to the environment, which is the usual way of disposal of this waste, to be carried out only after considering the radiological protection standards established.


Sign in / Sign up

Export Citation Format

Share Document