Efficiency of Different Nickel-Titanium Endodontic File Systems in Cleaning and Apical Transportation of Simulated Curved Root Canals

2017 ◽  
Vol 68 (5) ◽  
pp. 957-961
Author(s):  
Andrea Csinszka Kovacs Ivacson ◽  
Mariana Pacurar ◽  
Monica Monea ◽  
Monika Kovacs ◽  
Mihai Pop ◽  
...  
Keyword(s):  
Root Canal ◽  
File Systems ◽  
Nickel Titanium ◽  
Endodontic Treatment ◽  
Root Canal Treatment ◽  
Cleaning Efficiency ◽  
Root Canals ◽  
Apical Transportation ◽  
Curved Root Canals ◽  
Reference Areas

The use of nickel-titanium instruments have become an important part of the root canal treatment, in order to facilitate the cleaning and shaping of root canals, because the incorrect utilization of the endodontic files during endodontic treatment may produce unwanted procedural errors. The aim of this study was to evaluate on simulated curved root canal models the cleaning efficiency and the apical transportation in three reference areas of the root canal files, ProTaper (Dentsply Maillefer), K3XF (Sybron Endo) and HyFlex (Coltene Endo) systems, compared to the hand K-files (DentsplyMaillefer). According to our results, rotary file systems are more efficient than the hand files, in cleaning the root canal.

scholarly journals Cone-beam Computed Tomographic Analysis of Canal Transportation and Centering Ability of Three Different Nickel-Titanium Rotary File Systems

2021 ◽  
Vol 9 (D) ◽  
pp. 30-36
Author(s):  
Balaji Sopanrao Kapse ◽  
Pradnya S. Nagmode ◽  
Jayshree Ramkrishna Vishwas ◽  
Hrishikesh B. Karpe ◽  
Harshal V. Basatwar ◽  
...  
Keyword(s):  
Root Canal ◽  
File System ◽  
File Systems ◽  
Nickel Titanium ◽  
Root Canals ◽  
Apical Transportation ◽  
Significant Difference ◽  
Canal Transportation ◽  
Curved Root Canals

AIM: The aim of the present study was to compare the canal transportation and centering ability of three rotary nickel-titanium file systems, HyFlex controlled memory, Revo-S, and Mtwo in moderately curved root canals using computed tomography (CT). MATERIALS AND METHODS: Thirty freshly extracted single-rooted teeth having curved root canals with at least 10°–20° of curvature were selected. The teeth were divided into three experimental groups of ten each. After preparation with HyFlex CM (Coltene-Whaledent, Allstetten, Switzerland), Revo-S (Micro-Mega, Besançon, France), and Mtwo (VDW, Munich, Germany) all teeth were scanned using CT to determine the root canal shape. Pre- and post-instrumentation images were obtained at three levels, 3 mm apical, 9 mm middle, and 15 mm coronal above the apical foramen were compared using CT software. Amount of transportation and centering ability were assessed. The three groups were statistically compared with analysis of variance and post-hoc Tukey’s honestly significant difference test. RESULTS: Least apical transportation and higher centering ability were seen in HyFlex CM file system in all the three sections followed by Revo-S, Mtwo file system showed maximum transportation. CONCLUSIONS: According to the present in-vitro study, we can conclude that HyFlex CM rotary file systems showed least canal transportation and highest centering ability as compared to Revo-S and Mtwo file system but there was no statistically significant difference among these file systems (p > 0.05) at coronal, middle, and apical level of root canal.

scholarly journals Influence of cervical preflaring on apical transportation in curved root canals instrumented by reciprocating file systems

2015 ◽  
Vol 15 (1) ◽  
Author(s):  
Neisiana Barbieri ◽  
Denise Piotto Leonardi ◽  
Marina Samara Baechtold ◽  
Gisele Maria Correr ◽  
Marilisa Carneiro Leão Gabardo ◽  
...  
Keyword(s):  
File Systems ◽  
Root Canals ◽  
Apical Transportation ◽  
Curved Root Canals

scholarly journals Root Canal Stripping: Malpractice or Common Procedural Accident—An Ethical Dilemma in Endodontics

2016 ◽  
Vol 2016 ◽  
pp. 1-5
Author(s):  
Ionela Elisabeta Ciobanu ◽  
Darian Rusu ◽  
Stefan-Ioan Stratul ◽  
Andreea Cristina Didilescu ◽  
Corina Marilena Cristache
Keyword(s):  
Risk Factors ◽  
Ethical Dilemma ◽  
Root Canal ◽  
Tooth Extraction ◽  
Nickel Titanium ◽  
Middle Section ◽  
Root Canals ◽  
Legal Consequences ◽  
Curved Root Canals

Root canal stripping is defined as an oblong, vertical perforation that appears especially in the middle section of curved root canals during endodontic treatments with nickel-titanium (Ni-Ti) instruments. Its occurrence may drastically affect the outcome of the treatment, transforming a common otherwise efficient endodontic procedure into a complication such as tooth extraction. In order to discuss the ethical and legal consequences, two cases of dental strip perforations are herewith presented. Due to the existence of risk factors for dental strip perforation, experience of the clinician and the use of magnification and modern imagistic methods (CBCT) may avoid or reduce the frequency of this type of accidents. Under correct working circumstances, dental stripping should not be regarded as a malpractice but as a procedural accident. However, the patient must always be informed, before and during the endodontic procedure, about the event and the possible complications that may occur.

Shaping Ability of ProTaper Next, WaveOne, and Reciproc in Simulated Root Canals

2016 ◽  
Vol 17 (11) ◽  
pp. 902-906
Author(s):  
Mateus R Tonetto ◽  
EM Maia Filho ◽  
RM dos Reis Santos ◽  
Darlon M Lima ◽  
SM da Silva Pereira ◽  
...  
Keyword(s):  
Clinical Significance ◽  
Root Canal ◽  
Negative Impact ◽  
Endodontic Treatment ◽  
Root Canals ◽  
Before And After ◽  
Reciprocating Instruments ◽  
Shaping Ability ◽  
Curved Root Canals

ABSTRACT Introduction The study aimed to compare the shaping and preservation of the original curvature of simulated curved root canals using the following instruments: Reciproc (Rcp), WaveOne (Wo), and the ProTaper Next system (Ptn). Materials and methods A total of 45 resin blocks with simulated curved root canals were divided into three groups (n = 15), prepared using the Rcp (R25), Wo (25/0.8), and Ptn (X2) instruments. Standardized photographs were taken before and after canal instrumentation. After the superimposition of the images, the amount of resin removed from the curvature's inner and outer walls was measured at six apical levels, at intervals of 1 mm. The canals’ angles of curvature before and after instrumentation were subtracted. Results There were no significant differences between the instruments in terms of the total amount of resin removed of the inner or outer walls of the apical curvature (p > 0.05). The Rcp instruments provided the best resin removed ratios between the walls. The means of the change in angle were as follows: Wo = 2.15°, Ptn = 0.92°, and Rcp = 0.21°. WaveOne caused significantly higher deviations than Rcp. Conclusion All of the instruments demonstrated a tendency to straighten the simulated root canal. Instruments that use rotary movement achieved an effect similar to that of the reciprocating instruments in relation to change in angle. Clinical significance Deviations from the original shape of the root canal could have a negative impact on the quality of a filling and consequently on the success of the endodontic treatment. How to cite this article Maia Filho EM, dos Reis Santos RM, Lima DM, da Silva Pereira SM, Soares JA, de Jesus Tavarez RR, Ferreira MC, Carvalho CN, Bandeca MC, Tonetto MR, Borges AH, de Castro Rizzi C. Shaping Ability of ProTaper Next, WaveOne, and Reciproc in Simulated Root Canals. J Contemp Dent Pract 2016;17(11):902-906.

scholarly journals FREQUENT PROCEDURAL ERRORS AND STRUCTURAL COMPLICATIONS ON ENDODONTICAL TREATED TEETH

2021 ◽  
Vol 67 (2) ◽  
pp. 101-106
Author(s):  
Sanziana Adina Scarlatescu ◽  
◽  
Irina Gheorghiu ◽  
George Nicola ◽  
Andrei O. Al Aloul ◽  
...  
Keyword(s):  
Root Canal ◽  
Technological Progress ◽  
Endodontic Treatment ◽  
Root Canal Treatment ◽  
Canal System ◽  
Root Canals ◽  
Hard Tissues ◽  
Root Canal System

The objectives of root canal treatment are to prevent the apical parodontitis, to heal the acute or cronic apical periodontits and to maintain the results, keeping the teeth on the arch in a functional stage. Thus, accuratelly elimination of soft and hard tissues (cleaning and shaping of the root canal system), disinfection and complete, homogeneous and tridimensional filling of the root canal system are very important to successful endodontic treatment. Modern concepts in endodontic treatment rely on technological progress and therefore many cases are successfully fulfilled, but the practitioner may be put in front of procedural erorrs both during and after endodontic treatment. Apical blockage, ledging, zipping, stripping, perforations in the floor of the pulp canal chamber or root canals perforations are the most common errors, but in many clinical situations they can be prevented and even surpassed once happened.

scholarly journals Retrospective Assessment of Healing Outcome of Endodontic Treatment for Mandibular Molars with C-shaped Root Canal

2017 ◽  
Vol 18 (7) ◽  
pp. 591-595
Author(s):  
Kishore Kumar Majety ◽  
Basanta Kumar Choudhury ◽  
Anika Bansal ◽  
Achla Sethi ◽  
Jaina Panjabi
Keyword(s):  
Root Canal ◽  
Healing Process ◽  
Complete Healing ◽  
Endodontic Treatment ◽  
Root Canal Treatment ◽  
Pulp Tissue ◽  
Root Canal Therapy ◽  
Root Canals ◽  
Mandibular Molars ◽  
Retrospective Assessment

ABSTRACT Introduction A thorough knowledge of the anatomic morphology of the root canal system is necessary for the long-term success of the root canal therapy. The occurrence of C-shaped root canal configuration is one such variation. Achievement of favorable prognosis after commencing root canal therapy in such teeth is one of the challenges imposed on the endodontist. Hence, we evaluated the healing occurring after endodontic therapy in patients with C-shaped root canals in mandibular molars. Materials and methods The present study was conducted in the Department of Conservative Dentistry of the institution and included assessment of all the patients who underwent root canal treatment of the mandibular first and second molars. Endodontic therapy was performed in all the cases by experienced endodontist. Final postoperative radiographs were taken. Recording of the data of the personal and clinical details of a total of 250 patients was done. All the clinical and radiographic details of the patients, such as tooth location in the jaw, presence or absence of C-shaped canals, status of the pulp tissue, presence or absence of the fractures, and other details of the patients were recorded. Radiographic and clinical examination of the tooth of the patients was done during the baseline visit and further during the follow-up visits. The presence of C-shaped root canals was confirmed using the radiographs. Periapical index (PI) scoring system was used. Categories defined for enlisting the healing after the root canal treatment with the assessment of the PI score. All the results were analyzed by Statistical Package for the Social Sciences software. Results Vital pulp tissue was encountered in majority of the cases. C-shaped root canal configuration was observed in 40% of the cases included in the present study. After completion of the endodontic therapy, complete crown placement was done in only 22% of the cases. In cases of vital teeth with C-shaped root canals configuration, most of the teeth showed complete healing. Significant results were obtained while comparing the complete coverage crown parameter in relation to the healing process in teeth with C-shaped root canals. Conclusion In the present study, no significant effect of the C-shaped root canal configuration was found on the healing rate of the endodontic therapy in mandibular molars. Clinical significance Meticulous endodontic therapy with special techniques should be done while preparing teeth with C-shaped root canals. How to cite this article Bansal A, Parihar AS, Sethi A, Majety KK, Panjabi J, Choudhary BK. Retrospective Assessment of Healing Outcome of Endodontic Treatment for Mandibular Molars with C-shaped Root Canal. J Contemp Dent Pract 2017;18(7):591-595.

scholarly journals Performance of RaCe Instrumentation System in Curved Root Canals: A Comprehensive Analysis by Three Study Methods

2013 ◽  
Vol 24 (3) ◽  
pp. 230-234 ◽  
Author(s):  
Denise Piotto Leonardi ◽  
Gilson Blitzkow Sydney ◽  
Mario Tanomaru Filho ◽  
Flares Baratto-Filho ◽  
Samantha Schaffer Pugsley Baratto ◽  
...  
Keyword(s):  
Root Canal ◽  
Histological Analysis ◽  
Wilcoxon Test ◽  
Study Methods ◽  
Root Canals ◽  
Working Length ◽  
Apical Transportation ◽  
Significant Difference ◽  
Canal Enlargement ◽  
Curved Root Canals

In this study, curved maxillary molar root canals were instrumented with RaCe rotary system to evaluate: 1. the occurrence of canal transportation using a radiographic platform; 2. the action of the instruments on the dentin walls, centering ability and canal enlargement by analysis of digital images; and the percentage of regular dentin surfaces and debris within the canal by histological analysis. Ten mesiobuccal roots of extracted human maxillary molars were embedded in acrylic resin and sectioned at the middle and apical thirds. Root canal shaping was performed using the RaCe rotary system at 250 rpm and 1 Ncm torque. Each instrument set was used five times according to a crown-down technique in the following sequence: 40/0.10, 35/0.08, 25/0.06, 25/0.04, 25/0.02 (working length - WL), 30/0.02 (WL) and 35/0.02 (WL). Each instrument was inserted until resistance was felt and then pulled back, followed by brushing movements towards all canal walls. Each specimen was assessed by three study methods: radiographic platform, digitized image assessment and histological analysis. The radiographic platform showed lack of apical transportation. No statistically significant difference (Wilcoxon test, p>0.05) was found between the middle and apical thirds regarding instrument action on dentin walls, centering ability, area of root canal enlargement, percentage of regular dentin surfaces and debris within the root canal. It may be concluded that RaCe system is a suitable method for the preparation of curved root canals, regarding the maintenance of root canal original path, action on dentin walls, canal enlargement and removal of debris from the root canal lumen.

scholarly journals Fracture of endodontic instruments - Part 1: Literature review on factors that influence instrument breakage

2020 ◽  
Vol 75 (10) ◽  
pp. 553-563
Author(s):  
Maheshan Pillay ◽  
Martin Vorster ◽  
Peet J Van der Vyver
Keyword(s):  
Adverse Effect ◽  
Literature Review ◽  
Root Canal ◽  
Nickel Titanium ◽  
Endodontic Treatment ◽  
Risk Of Fracture ◽  
Periapical Lesions ◽  
Root Canals ◽  
Infected Root ◽  
Infected Root Canal

Instrument fracture is a serious complication during endodontic treatment of teeth, having an adverse effect on the outcome of the nickel titanium (NiTi) treatment, especially if the fracture prevents apical access to the infected root canal. Despite the advent of NiTi files, the risk of fracture during the endodontic preparation of root canals, especially in severely curved canals, remains a serious concern. The fracture of NiTi files during preparation may result in a compromised prognosis for the tooth. In the presence of periapical lesions, instrument fracture may reduce the chances of successful healing.

scholarly journals Management of Mandibular Lateral Incisor with Two Roots: a Case Report

2016 ◽  
Vol 5 (1) ◽  
pp. 1093 ◽  
Author(s):  
Pardeep Mahajan ◽  
Ruma Grover ◽  
Shikha Baghi Bhandari ◽  
Prashant Monga ◽  
Vanita Keshav
Keyword(s):  
Case Report ◽  
Root Canal ◽  
Endodontic Treatment ◽  
Root Canal Treatment ◽  
Lateral Incisor ◽  
Successful Outcome ◽  
Filling Material ◽  
Canal System ◽  
Root Canals ◽  
Root Canal System

Successful outcome of endodontic treatment depends on the identification of all root canals which in turn guarantee complete extirpation of pulp tissue, proper chemo-mechanical cleaning and shaping and three dimensional obturation of the root canal system with an inert filling material. However endodontic treatment can fail for many reasons, such as diagnostic errors, persistence of the infection in the root canal system, errors in debridement and shaping of the root canal systems, instrument fractures, poor restorations and extra roots or canals if not detected are the reasons for failure. Undetected extra roots or root canals have been considered as a major reason for failure of root canal treatment. Many of the challenges faced during root canal treatment may be directly attributed to an inadequate understanding of the canal morphology of teeth. A broad knowledge of both the external and internal anatomy of teeth is of great importance for adequate endodontic treatment. We present a case report of 2 roots in mandibular lateral incisor.

scholarly journals A microcomputed tomography evaluation of the shaping ability of three thermally-treated nickel-titanium rotary file systems in curved canals

2018 ◽  
Vol 47 (1) ◽  
pp. 325-334 ◽  
Author(s):  
Zhuwei Huang ◽  
Jingjing Quan ◽  
Jia Liu ◽  
Wen Zhang ◽  
Xiaolei Zhang ◽  
...  
Keyword(s):  
Root Canal ◽  
File Systems ◽  
Microcomputed Tomography ◽  
Nickel Titanium ◽  
Root Canal Preparation ◽  
Root Canals ◽  
Before And After ◽  
Shaping Ability ◽  
Thermally Treated

Objective To evaluate the shaping ability of three thermally-treated rotary nickel-titanium (NiTi) systems including ProTaper Next (PTN), HyFlex™ CM (HFCM) and HyFlex™ EDM (HFEDM) during root canal preparation in simulated root canals. Methods A total of 45 simulated root canals were divided into three groups ( n = 15) and prepared with PTN, HFCM or HFEDM files up to size 25. Microcomputed tomography (microCT) was used to scan the specimens before and after instrumentation. Volume and diameter changes, transportations and centring ratios at 11 levels of the simulated root canals were measured and compared. Results HFEDM caused significantly greater volume increases than HFCM and PTN in the entire root canal and in the apical and middle thirds. HFCM removed the least amount of resin in the coronal third compared with HFEDM and PTN. Overall, HFCM caused significantly less transportation in the apical 2 mm and was better centred than PTN in the apical 3 mm. Conclusion Under the conditions of this study, all systems prepared curved canals without significant shaping errors and instrument fracture. PTN and HFCM cut less resin than HFEDM. HFCM stayed centred apically and cut the least material coronally.

Sign in / Sign up

Export Citation Format

Share Document