scholarly journals Nanostructured superhydrophobic films synthesized by electrodeposition of fluorinated polyindoles

2015 ◽  
Vol 6 ◽  
pp. 2078-2087 ◽  
Author(s):  
Gabriela Ramos Chagas ◽  
Thierry Darmanin ◽  
Frédéric Guittard
Keyword(s):  
Surface Energy ◽  
Surface Morphology ◽  
Polymeric Films ◽  
Spherical Nanoparticles ◽  
Low Surface Energy ◽  
Potential Applications

Materials with bioinspired superhydrophobic properties are highly desirable for many potential applications. Here, nine novel monomers derived from indole are synthesized to obtain these properties by electropolymerization. These monomers differ by the length (C4F9, C6F13 and C8F17) and the position (4-, 5- and 6-position of indole) of the perfluorinated substituent. Polymeric films were obtained with C4F9 and C6F13 chains and differences in the surface morphology depend especially on the substituent position. The polyindoles exhibited hydrophobic and superhydrophobic properties even with a very low roughness. The best results are obtained with PIndole-6-F 6 for which superhydrophobic and highly oleophobic properties are obtained due to the presence of spherical nanoparticles and low surface energy compounds.

scholarly journals Low Surface Energy Polymeric Films from Novel Fluorinated Blocked Isocyanates

2004 ◽  
Vol 37 (2) ◽  
pp. 408-413 ◽  
Author(s):  
L. van Ravenstein ◽  
W. Ming ◽  
R. D. van de Grampel ◽  
R. van der Linde ◽  
G. de With ◽  
...  
Keyword(s):  
Surface Energy ◽  
Polymeric Films ◽  
Low Surface Energy

Low Surface Energy Polymeric Films from Solventless Liquid Oligoesters and Partially Fluorinated Isocyanates

2002 ◽  
Vol 35 (18) ◽  
pp. 6920-6929 ◽  
Author(s):  
W. Ming ◽  
M. Tian ◽  
R. D. van de Grampel ◽  
F. Melis ◽  
X. Jia ◽  
...  
Keyword(s):  
Surface Energy ◽  
Polymeric Films ◽  
Low Surface Energy

Low surface energy polymeric films from partially fluorinated photocurable solventless liquid oligoesters

2001 ◽  
Vol 47 (3-4) ◽  
pp. 321-328 ◽  
Author(s):  
Weihua Ming ◽  
Luc van Ravenstein ◽  
Robert van de Grampel ◽  
Wouter van Gennip ◽  
Maarten Krupers ◽  
...  
Keyword(s):  
Surface Energy ◽  
Polymeric Films ◽  
Low Surface Energy

Cytocompatibility of Carbon Nanofiber Materials for Neural Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster
Keyword(s):  
Carbon Fiber ◽  
Surface Energy ◽  
Carbon Nanofibers ◽  
Carbon Fibers ◽  
Carbon Nanofiber ◽  
Fiber Composite ◽  
Scar Tissue ◽  
Pc 12 Cells ◽  
Low Surface Energy ◽  
Poly Carbonate

AbstractSince the cytocompatibility of carbon nanofibers with respect to neural applications remains largely uninvestigated, the objective of the present in vitro study was to determine cytocompatibility properties of formulations containing carbon nanofibers. Carbon fiber substrates were prepared from four different types of carbon fibers, two with nanoscale diameters (nanophase, or less than or equal to 100 nm) and two with conventional diameters (or greater than 200 nm). Within these two categories, both a high and a low surface energy fiber were investigated and tested. Astrocytes (glial scar tissue-forming cells) and pheochromocytoma cells (PC-12; neuronal-like cells) were seeded separately onto the substrates. Results provided the first evidence that astrocytes preferentially adhered on the carbon fiber that had the largest diameter and the lowest surface energy. PC-12 cells exhibited the most neurites on the carbon fiber with nanodimensions and low surface energy. These results may indicate that PC-12 cells prefer nanoscale carbon fibers while astrocytes prefer conventional scale fibers. A composite was formed from poly-carbonate urethane and the 60 nm carbon fiber. Composite substrates were thus formed using different weight percentages of this fiber in the polymer matrix. Increased astrocyte adherence and PC-12 neurite density corresponded to decreasing amounts of the carbon nanofibers in the poly-carbonate urethane matrices. Controlling carbon fiber diameter may be an approach for increasing implant contact with neurons and decreasing scar tissue formation.

Corrigendum to “Fabrication superhydrophobic composite membranes with hierarchical geometries and low-surface-energy modifications” [Polymer 211 (2020) 123097]

Polymer ◽  
2021 ◽  
Vol 217 ◽  
pp. 123481
Author(s):  
Zhanhui Gan ◽  
Deyu Kong ◽  
Qianqian Yu ◽  
Yifan Jia ◽  
Xue-Hui Dong ◽  
...  
Keyword(s):  
Surface Energy ◽  
Composite Membranes ◽  
Low Surface Energy

scholarly journals Automated pick-and-place of single nanoparticle using electrically controlled low-surface energy nanotweezer

AIP Advances ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 035219
Author(s):  
Ya-Kun Lyu ◽  
Zuo-Tao Ji ◽  
Tao He ◽  
Zhenda Lu ◽  
Weihua Zhang
Keyword(s):  
Surface Energy ◽  
Low Surface Energy ◽  
Single Nanoparticle ◽  
Pick And Place

scholarly journals Composite Poly(vinyl alcohol)-Based Nanofibers Embedding Differently-Shaped Gold Nanoparticles: Preparation and Characterization

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1604
Author(s):  
Andrea Dodero ◽  
Maila Castellano ◽  
Paola Lova ◽  
Massimo Ottonelli ◽  
Elisabetta Brunengo ◽  
...  
Keyword(s):  
Vinyl Alcohol ◽  
Ad Hoc ◽  
Chemical Reduction ◽  
Chemical Properties ◽  
Single Step ◽  
Gold Nanostructures ◽  
Poly Vinyl Alcohol ◽  
Spherical Nanoparticles ◽  
Potential Applications ◽  
New Perspective

Poly(vinyl alcohol) nanofibrous mats containing ad hoc synthesized gold nanostructures were prepared via a single-step electrospinning procedure and investigated as a novel composite platform with several potential applications. Specifically, the effect of differently shaped and sized gold nanostructures on the resulting mat physical-chemical properties was investigated. In detail, nearly spherical nanoparticles and nanorods were first synthesized through a chemical reduction of gold precursors in water by using (hexadecyl)trimethylammonium bromide as the stabilizing agent. These nanostructures were then dispersed in poly(vinyl alcohol) aqueous solutions to prepare nanofibrous mats, which were then stabilized via a humble thermal treatment able to enhance their thermal stability and water resistance. Remarkably, the nanostructure type was proven to influence the mesh morphology, with the small spherical nanoparticles and the large nanorods leading to thinner well defined or bigger defect-rich nanofibers, respectively. Finally, the good mechanical properties shown by the prepared composite mats suggest their ease of handleability thereby opening new perspective applications.

Sign in / Sign up

Export Citation Format

Share Document