Design Method of Optical System of Improved Czerny-Turner Imaging Spectrometer

2012 ◽  
Vol 32 (3) ◽  
pp. 0322007 ◽  
Author(s):  
刘健鹏 Liu Jianpeng ◽  
唐义 Tang Yi ◽  
黄刚 Huang Gang ◽  
张止戈 Zhang Zhige ◽  
倪国强 Ni Guoqiang
Keyword(s):  
Optical System ◽  
Design Method ◽  
Imaging Spectrometer

scholarly journals Asymmetric Double Freeform Surface Lens for Integrated LED Automobile Headlamp

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 663
Author(s):  
Hui Zhang ◽  
Dengfei Liu ◽  
Yinwan Wei ◽  
Hong Wang
Keyword(s):  
Optical System ◽  
Design Method ◽  
Chromatic Dispersion ◽  
Electronic Devices ◽  
Color Temperature ◽  
Freeform Surface ◽  
United Nations Economic Commission ◽  
System A ◽  
Economic Commission ◽  
Key Points

We propose a design method of asymmetric double freeform surface lens for an integrated LED automobile headlamp and develop an integrated LED automobile optical system. A single asymmetric double freeform surface lens is designed to redistribute rays emitting from the light source for realizing both low and high beams. Moreover, a freeform surface reflector is used to improve the energy efficiency of high beams. The prism placed in the optical path can suppress chromatic dispersion on the edge of the target plane. Simulation and experimental results show that the illumination values and color temperature of the key points can fully meet the requirements of United Nations Economic Commission for Europe vehicle regulations (ECE) R112, 48, and 128. The volume of the whole optical system comprised of freeform surface elements is smaller than that of the low beam system of a traditional headlamp, resulting in saved space, in which other electronic devices can be installed for the safety of the driver, which indicates that the proposed method is practical in the field of automobile lighting.

Design method of infrared microscope optical system with lower aberration compensation

2021 ◽  
Vol 50 (2) ◽  
pp. 20200153-20200153
Author(s):  
刘智颖 Zhiying Liu ◽  
吕知洋 Zhiyang Lv ◽  
高柳絮 Liuxu Gao
Keyword(s):  
Optical System ◽  
Design Method ◽  
Infrared Microscope

scholarly journals Optical Design of Improved Offner Imaging Spectrometer

2021 ◽  
Vol 2112 (1) ◽  
pp. 012007
Author(s):  
Chong Song ◽  
Yong Huang ◽  
Yangdong Yan ◽  
Dongsen Cui ◽  
Gang Wang ◽  
...  
Keyword(s):  
Optical System ◽  
Optical Design ◽  
Annular Region ◽  
Practical Application ◽  
Imaging Spectrometer ◽  
Imaging Quality ◽  
Lens Position ◽  
Operating Wavelength ◽  
The Stability ◽  
System Characteristics

Abstract An improved Offner imaging spectrometer was proposed based on the optical system characteristics of Offner imaging spectrometer, which can ensure perfect imaging quality in a wider annular region. The operating wavelength of the improved Offner imaging spectrometer ranges from 900nm to 1700nm, and the magnification is 1. Improved Offner imaging spectrometer can be obtained by changing the meniscus lens position and further optimizing the design. The results indicate that the improved Offner imaging spectrometer can effectively improve compactness and lightweight, and reduce the difficulty of optical adjustment, which is conducive to the stability of practical application.

scholarly journals Optical Design of a Shortwave Infrared Dual Camera CASSI Based on Improved Offner-Wynne Imaging Spectrometer

2021 ◽  
Vol 2112 (1) ◽  
pp. 012021
Author(s):  
Chong Song ◽  
Lipeng Huo ◽  
Yong Huang ◽  
Yangdong Yan ◽  
Gang Wang ◽  
...  
Keyword(s):  
Optical System ◽  
Imaging System ◽  
Optical Measurement ◽  
Focal Length ◽  
Optical Design ◽  
Optical Transmittance ◽  
Coded Aperture ◽  
Visual Axis ◽  
Imaging Spectrometer ◽  
Shortwave Infrared

Abstract Based on the optical system characteristics of coded aperture snapshot spectral imager (CASSI), an optimized optical system of shortwave infrared dual camera CASSI was designed based on improved Offner-Wynne imaging spectrometer. The operating wavelength of the optical system ranges from 900nm to 1700nm, and the focal length is 1200mm. It consists of two parts: the two dimensional imaging system and the multispectral CASSI imaging system. The key technical parameters of the two parts are the same and there is no visual axis difference. Therefore, the optimized optical system can effectively improve real-time performance, optical transmittance and compactness of the dual camera shortwave infrared CASSI, which is conducive to the application in optical measurement scenes in the shooting range.

Design of Hybrid Refractive and Reflective Optical System of Long-Wave Infrared Region Imaging Spectrometer

2012 ◽  
Vol 32 (11) ◽  
pp. 1122005
Author(s):  
张晓龙 Zhang Xiaolong ◽  
刘英 Liu Ying ◽  
孙强 Sun Qiang ◽  
刘建卓 Liu Jianzhuo ◽  
王保华 Wang Baohua
Keyword(s):  
Optical System ◽  
Infrared Region ◽  
Imaging Spectrometer ◽  
Long Wave ◽  
Long Wave Infrared

Optical System Design with High Resolution and Large Field of View for the Remote Sensor

2007 ◽  
Vol 364-366 ◽  
pp. 550-554
Author(s):  
Jun Chang ◽  
Zhi Cheng Weng ◽  
Yong Tian Wang ◽  
De Wen Cheng ◽  
Hui Lin Jiang
Keyword(s):  
High Resolution ◽  
Optical System ◽  
Design Method ◽  
Field Of View ◽  
Large Field ◽  
Wide Field ◽  
Remote Sensor ◽  
Wide Field Of View ◽  
Technological Developments ◽  
Technological Opportunities

In this paper, we are presenting a design method and its results for a space optical system with high resolution and wide field of view. This optical system can be used both in infrared and visible configurations. The designing of this system is based on an on-axis three-mirror anastigmatic (TMA) system. Here the on-axis concept allows wide field of view (FOV) enabling a diversity of designs available for the Multi-Object Spectrometer instruments optimized for low scattered and low emissive light. The available FOVs are upto 1º in both spectrum ranges, whereas the available aperture range is F/15 - F/10. The final optical system is a three-mirror telescope with two on-axis and one off-axis segment and its resolution is 0.3m or even lower. The distinguished feature of this design is that it maintains diffraction-limited image at wide wavelengths. The technological developments in the field of computer generated shaping of large-sized optical surface details with diffraction-limited imagery have opened new avenues towards the designing techniques. Such techniques permit us to expand these technological opportunities to fabricate the aspherical off-axis mirrors for a complex configuration.

Design method of high-efficient LED freeform optical system for aeronautical ground light

2011 ◽  
Author(s):  
Shang Wang ◽  
Fei Chen ◽  
Kai Wang ◽  
Quan Chen ◽  
Zhili Zhao ◽  
...  
Keyword(s):  
Optical System ◽  
Design Method ◽  
High Efficient
Sign in / Sign up

Export Citation Format

Share Document