scholarly journals Measurement of Fluid Flow and Heat Transfer Performance in Rectangular Microchannel using Pure Water and Fe3O4-H2O Nanofluid

2020 ◽  
Vol 68 (1) ◽  
pp. 9-21
Author(s):  
Saidu Bello Abubakar ◽  
Nor Azwadi Che Sidik ◽  
Siti Nurul Akmal Yusof
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Heat Transfer Performance ◽  
Pure Water ◽  
Transfer Performance ◽  
Rectangular Microchannel ◽  
Flow And Heat Transfer

A Study on Flow Boiling in Microchannel With Piranha Pin Fin

2015 ◽  
Author(s):  
X. Yu ◽  
C. Woodcock ◽  
Y. Wang ◽  
J. Plawsky ◽  
Y. Peles
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Fluid Flow ◽  
Pressure Drop ◽  
Heat Transfer Performance ◽  
Flow Boiling ◽  
Transfer Performance ◽  
Flow Conditions ◽  
Pin Fin ◽  
Flow And Heat Transfer

In this paper we reported an advanced structure, the Piranha Pin Fin (PPF), for microchannel flow boiling. Fluid flow and heat transfer performance were evaluated in detail with HFE7000 as working fluid. Surface temperature, pressure drop, heat transfer coefficient and critical heat flux (CHF) were experimentally obtained and discussed. Furthermore, microchannels with different PPF geometrical configurations were investigated. At the same time, tests for different flow conditions were conducted and analyzed. It turned out that microchannel with PPF can realize high-heat flux dissipation with reasonable pressure drop. Both flow conditions and PPF configuration played important roles for both fluid flow and heat transfer performance. This study provided useful reference for further PPF design in microchannel for flow boiling.

Experimental and Numerical Studies of Fluid Flow Confined in Microchannel

2016 ◽  
Author(s):  
Yan Wang ◽  
Xiang Ling
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Reynolds Number ◽  
Fluid Flow ◽  
Friction Factor ◽  
Heat Transfer Performance ◽  
Pure Water ◽  
High Heat Flux ◽  
Transfer Performance ◽  
Parallel Microchannels

The heat transfer performance of fluid flowing in a microchannel was experimentally studied, to meet the requirement of extremely high heat flux removal of microelectronic devices. There were 10 parallel microchannels with rectangular cross-section in the stainless steel plate, which was covered by a glass plate to observe the fluid flowing behavior, and another heating plate made of aluminum alloy was positioned behind the microchannel. Single phase heat transfer and fluid flow downstream the microchannel experiments were conducted with both deionized water and ethanol. Besides experiments, numerical models were also set up to make a comparison with experimental results. It is found that the pressure drop increases rapidly with enlarging Reynolds number (200), especially for ethanol. With comparison, the flow resistance of pure water is smaller than ethanol. Results also show that the friction factor decreases with Reynolds number smaller than the critical value, while increases the velocity, the friction factor would like to keep little changed. We also find that the water friction factors obtained by CFD simulations in parallel microchannels are much larger than experiment results. With heat flux added to the fluid, the heat transfer performance can be enhanced with larger Re number and the temperature rise could be weaken. Compared against ethanol, water performed much better for heat removal. However, with intensive heat flux, both water and ethanol couldn’t meet the requirement and the temperature at outlet would increase remarkably, extremely for ethanol. These findings would be helpful for thermal management design and optimization.

Lattice Boltzmann simulation of convective flow and heat transfer in a nanofluid-filled hollow cavity

2019 ◽  
Vol 29 (9) ◽  
pp. 3075-3094
Author(s):  
Qiang Pu ◽  
Farhad Aalizadeh ◽  
Darya Aghamolaei ◽  
Mojtaba Masoumnezhad ◽  
Alireza Rahimi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Heat Transfer Performance ◽  
Transfer Performance ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Boltzmann Method

Purpose This paper aims to to simulate the flow and heat transfer during free convection in a square cavity using double-multi-relaxation time (MRT) lattice Boltzmann method. Design/methodology/approach The double-MRT lattice Boltzmann method is used, and the natural convection fluid flow and heat transfer under influence of different parameters are analyzed. The D2Q5 model and D2Q9 model are used for simulation of temperature field and flow field, respectively. The cavity is filled with CuO-water nanofluid; in addition, the thermo-physical properties of nanofluid and the effect of nanoparticles’ shapes are considered using Koo–Kleinstreuer–Li (KKL) model. On the other hand, the cavity is included with an internal active hollow with constant thermal boundary conditions at its walls and variable dimensions. It should be noted that the dimensions of the internal hollow will be determined by as aspect ratio. Findings The Rayleigh number, nanoparticle concentration and the aspect ratio are the governing parameters. The heat transfer performance of the cavity has direct relationship with the Rayleigh number and solid volume fraction of CuO-water nanofluid. Moreover, the configuration of the cavity is good controlling factor for changing the heat transfer performance and entropy generation. Originality/value The originality of this work is using double-MRT lattice Boltzmann method in simulating the free convection fluid flow and heat transfer.

Fluid Flow and Heat Transfer Characteristics of Ethylene Glycol and Water in Copper-Based Microchannel Devices

2009 ◽  
Author(s):  
Fanghua Mei ◽  
B. Lu ◽  
W. J. Meng ◽  
S. Guo
Keyword(s):  
Heat Transfer ◽  
Ethylene Glycol ◽  
High Performance ◽  
Heat Transfer Performance ◽  
Pure Water ◽  
High Heat Flux ◽  
Transfer Performance ◽  
Fluid Medium ◽  
Flow And Heat Transfer ◽  
Transfer Testing

Metal-based microchannel heat exchangers (MHEs) offer potential solutions to applications demanding high heat flux removal, such as cooling of high-performance microelectronic and energy-efficient lighting modules. Efficient fabrication of metal-based MHEs and quantitative flow and heat transfer measurements on them are critical for establishing the economic and technical feasibility of such devices. Adopting metal-based MHEs in many applications demands quantification of flow and heat transfer performance with application-relevant coolants, e.g. ethylene glycol (EG)/water mixtures rather than pure water. As a first step in this direction, we report here fabrication and assembly of all-Cu MHE prototypes, as well as results of flow and heat transfer testing using pure EG and pure water as the fluid medium. Results of heat transfer testing indicate sensitivity of overall heat transfer performance to entrance length effects, which in the case of pure EG, is significantly influenced by its physical properties under the testing condition.

Numerical simulation of the fluid flow and heat transfer characteristics of microchannel heat exchangers with different reentrant cavities

2019 ◽  
Vol 29 (11) ◽  
pp. 4334-4348
Author(s):  
Minqiang Pan ◽  
Hongqing Wang ◽  
Yujian Zhong ◽  
Tianyu Fang ◽  
Xineng Zhong
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Heat Exchangers ◽  
Heat Transfer Performance ◽  
Transfer Performance ◽  
Content Type ◽  
Microchannel Heat Exchanger ◽  
Flow And Heat Transfer

Purpose With the increasing heat dissipation of electronic devices, the cooling demand of electronic products is increasing gradually. A water-cooled microchannel heat exchanger is an effective cooling technology for electronic equipment. The structure of a microchannel has great impact on the heat transfer performance of a microchannel heat exchanger. The purpose of this paper is to analyze and compare the fluid flow and heat transfer characteristic of a microchannel heat exchanger with different reentrant cavities. Design/methodology/approach The three-dimensional steady, laminar developing flow and conjugate heat transfer governing equations of a plate microchannel heat exchanger are solved using the finite volume method. Findings At the flow rate range studied in this paper, the microchannel heat exchangers with reentrant cavities present better heat transfer performance and smaller pressure drop. A microchannel heat exchanger with trapezoidal-shaped cavities has best heat transfer performance, and a microchannel heat exchanger with fan-shaped cavities has the smallest pressure drop. Research limitations/implications The fluid is incompressible and the inlet temperature is constant. Practical implications It is an effective way to enhance heat transfer and reduce pressure drop by adding cavities in microchannels and the data will be helpful as guidelines in the selection of reentrant cavities. Originality/value This paper provides the pressure drop and heat transfer performance analysis of microchannel heat exchangers with various reentrant cavities, which can provide reference for heat transfer augmentation of an existing microchannel heat exchanger in a thermal design.

Sign in / Sign up

Export Citation Format

Share Document