scholarly journals Implementation of Beam Steering using Phased Array Antennas

Author(s):  
Jestin John Mathew ◽  
Nitish HS ◽  
Dr. Jayavrinda V V ◽  
Dr. Raghunandan S

Beam steering is a phenomenon of varying the direction of the main lobe in the radiation pattern, so in radar systems it can be achieved by changing the relative phases of the antenna being implemented.But,some of the setbacks of implementing beam steering in mechanical antennas like microstrip antenna is that the directivity and, gain is low,and interference is very high.Whereas,in our project we have implemented beam steering using phased array antennas which has produced better results.So,an phased array antenna is electronically scanned antenna ,which produces a beam of radio waves that can be steered to different points based on our requirements by keeping the antenna stationary.Also,these type of antennas require less maintenance as compared to mechanical antennas

Author(s):  
Tarek Sallam ◽  
Ahmed M. Attiya

Abstract Achieving robust and fast two-dimensional adaptive beamforming of phased array antennas is a challenging problem due to its high-computational complexity. To address this problem, a deep-learning-based beamforming method is presented in this paper. In particular, the optimum weight vector is computed by modeling the problem as a convolutional neural network (CNN), which is trained with I/O pairs obtained from the optimum Wiener solution. In order to exhibit the robustness of the new technique, it is applied on an 8 × 8 phased array antenna and compared with a shallow (non-deep) neural network namely, radial basis function neural network. The results reveal that the CNN leads to nearly optimal Wiener weights even in the presence of array imperfections.


Author(s):  
Aparna B. Barbadekar ◽  
Pradeep M. Patil

Abstract The paper proposes a system consisting of novel programmable system on chip (PSoC)-controlled phase shifters which in turn guides the beam of an antenna array attached to it. Four antennae forming an array receive individual inputs from the programmable phase shifters (IC 2484). The input to the PSoC-based phase shifter is provided from an optimized 1:4 Wilkinson power divider. The antenna consists of an inverted L-shaped dipole on the front and two mirrored inverted L-shaped dipoles mounted on a rectangular conductive structure on the back which resonates in the ISM/Wi-Fi band (2.40–2.48 GHz). The power divider is designed to provide the feed to the phase shifter using a beamforming network while ensuring good isolation among the ports. The power divider has measured S11, S21, S31, S41, and S51 to be −14, −6.25, −6.31, −6.28, and −6.31 dB, respectively at a frequency of 2.45 GHz. The ingenious controller is designed in-house using a PSoC microcontroller to regulate the control voltage of individual phase shifter IC and generate progressive phase shifts. To validate the calibration of the in-house designed control circuit, the phased array is simulated using $s_p^2$ touchstone file of IC 2484. This designed control circuit exhibits low insertion loss close to −8.5 dB, voltage standing wave ratio of 1.58:1, and reflection coefficient (S11) is −14.36 dB at 2.45 GHz. Low insertion loss variations confirm that the phased-array antenna gives equal amplitude and phase. The beamforming radiation patterns for different scan angles (30, 60, and 90°) for experimental and simulated phased-array antenna are matched accurately showing the accuracy of the control circuit designed. The average experimental and simulated gain is 13.03 and 13.48 dBi respectively. The in-house designed controller overcomes the primary limitations associated with the present electromechanical phased array such as cost weight, size, power consumption, and complexity in design which limits the use of a phased array to military applications only. The current study with novel design and enhanced performance makes the system worthy of the practical use of phased-array antennas for common society at large.


2021 ◽  
Vol 66 (4) ◽  
pp. 427-432
Author(s):  
V. I. Gusevskii ◽  
M. D. Duplenkova ◽  
O. N. Tsvetkova

2021 ◽  
Author(s):  
Yu.N. Gorbunov ◽  
G.L. Akopyan ◽  
R.K. Burnosov

The article establishes a connection between the directional properties of digital phased array antennas (FAR) in radar systems by means of space-time signal processing, based on the use of stochastic quantization scales in time, space and level, leading to a decrease in the influence of sampling noise and quantization in the process of diagram formation and the formation of frequency selectivity "narrowed" (in the usual and spatial frequencies - angular directions) frequency channels, formed by increasing the size of spatial and temporal samples.


2002 ◽  
Vol 720 ◽  
Author(s):  
J. B. L. Rao ◽  
D. P. Patel ◽  
P. K. Park ◽  
T. K. Dougherty ◽  
J. A. Zelik ◽  
...  

AbstractA novel, low-cost, phased-array antenna that uniquely incorporates bulk phase shifting using voltage-tunable dielectric (VTD) material is presented. The array does not contain an individual phase shifter at each radiating element. This paper presents the antenna concept and describes how it can be used as a low-cost phased array. The VTDs that are used in this antenna are described. The measured antenna patterns of a prototype phased array demonstrating electronic beam scanning at 10 GHz are also presented.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
ByungKuon Ahn ◽  
In-June Hwang ◽  
Kwang-Seok Kim ◽  
Soo-Chang Chae ◽  
Jong-Won Yu ◽  
...  

AbstractThis paper presents a wide-angle scanning phased array antenna using high gain pattern reconfigurable antenna (PRA) elements. Using PRA elements is an attractive solution for wide-angle scanning phased array antennas because the scanning range can be divided into several subspaces. To achieve the desired scanning performance, some characteristics of the PRA element such as the number of switching modes, tilt angle, and maximum half-power beamwidth (HPBW) are required. We analyzed the required characteristics of the PRA element according to the target scanning range and element spacing, and presented a PRA element design guideline for phased array antennas. In accordance with the guideline, the scanning range was set as ±70° and a high gain PRA element with three reconfigurable patterns was used to compose an 8x1 array antenna with 0.9 λ0 spacing. After analyzing whether the active element patterns meet the guideline, the array antenna was fabricated and measured to demonstrate the scanning performance. The fabricated array can scan its beam from -70° to 70° by dividing the scanning range into three subspaces. It shows that even if the array antenna has large element spacing, the desired scanning performance can be obtained using the elements designed under the guideline.


2013 ◽  
Vol 5 (5) ◽  
pp. 629-636
Author(s):  
Wei Shi ◽  
Jun Zhou ◽  
Zuping Qian ◽  
Ya Shen

Detailed analysis of the polarization tracking modules for Ku band active phased array antennas is presented. The proposed transmitter (14.0–14.5 GHz) and receiver (12.25–12.75 GHz) modules are based on the low temperature co-fired ceramic (LTCC) technique, containing orthogonal dual channels with different phases controlled by phase shifters. The effect of amplitude and phase inconsistency between two channels on polarization tracking performance is analyzed. The validity of the analysis is verified by the measurements of the manufactured prototypes. The measured patterns of the active phased array antenna are given to illustrate the effects of the modules on polarization agility, which may be used for Ku band satellite antennas on mobile terminals.


Sign in / Sign up

Export Citation Format

Share Document