scholarly journals An apparently non-swinging tentorium in the Diplopoda (Myriapoda): comparative morphology of the tentorial complex in giant pill-millipedes (Sphaerotheriida)

ZooKeys ◽  
2018 ◽  
Vol 741 ◽  
pp. 77-91 ◽  
Author(s):  
Leif Moritz ◽  
Thomas Wesener ◽  
Markus Koch

The presence of a swinging tentorium is a key apomorphy of Myriapoda, but this character has been studied in detail in only few species. Here the tentorium, i.e., the peristomatic skeleton of the preoral chamber, is comparatively studied in three species of the millipede order Sphaerotheriida Brandt, 1833. Since dissections of the fragile tentorial components proved to be difficult, despite the large head size, they were analysed mainly in situ via micro-computed tomography. Our results confirm previous observations of large differences in the tentorial construction in the giant pill-millipedes compared to chilognathan diplopods. The tentorium of Sphaerotheriida consists of a curved, plate-like epipharyngeal bar with distal projections, an elongate and thin hypopharyngeal bar, and a plate-like triangular posterior process; a transverse bar is absent. Only seven muscles attach at the tentorium in giant pill-millipedes, including two antennal muscles and two muscles of the gnathochilarium. Within the order Sphaerotheriida, the composition of the tentorium and its muscular equipment seems to be conserved, except for some variability in the shape of the epipharyngeal bar. As the transverse bar has been considered essential for the mobility of the tentorium in myriapods, its absence in Sphaerotheriida may indicate that their tentorium is not capable of performing a swing. Loss of tentorial mobility may also pertain to the order Glomerida Brandt, 1833, inferred here from the absence of a posterior process. An apparently immobile tentorium in Glomerida and Sphaerotheriida can straightforwardly be correlated with transformations of the head related to their ability of volvation. The different transformations of the tentorium, here hypothesised to cause immobility, may support current assumptions that the ability of volvation evolved convergently in Glomerida and Sphaerotheriida. This conclusion, however, still requires more detailed studies of the head anatomy in Glomerida and Glomeridesmida Cook, 1895.

2020 ◽  
Vol 54 (25) ◽  
pp. 3895-3917 ◽  
Author(s):  
Garrett W Melenka ◽  
Cagri Ayranci

Braiding is an advanced textile manufacturing method that is used to produce two-dimensional and three-dimensional components. Unlike laminated structures, braids have interlaced yarns that form a continuity between layers. This structure allows for improved impact resistance, damage tolerance, and improved through-thickness reinforcement. Despite the numerous advantages of braided composites, braids also have shortcomings. Their highly complex fiber architecture presents challenges in the availability and choice of the strain measuring and characterization techniques. Advanced measurement methods such as optical strain measurement, micro-computed tomography, and in situ strain measurement are required. Optical strain measurement methods such as digital image correlation and high-speed imaging are necessary to accurately measure the complex deformation and failure that braided composites exhibit. X-ray-based micro-computed tomography measurements can provide detailed geometric and morphologic information for braided structures, which is necessary for accurately predicting the mechanical properties of braided structures. Finally, in situ strain measurement methods will provide detailed information on the internal deformation and strain that exists within braided structures. In situ sensors will also allow for in-service health monitoring of braided structures. This paper provides a detailed review of the aforementioned sensing technologies and their relation to the measurement of braided composite structures.


2015 ◽  
Author(s):  
Brian M. Patterson ◽  
Nikolaus Lynn Cordes ◽  
Bryce C. Tappan ◽  
Darla Graff Thompson ◽  
Virginia Warren Manner

2006 ◽  
Vol 39 ◽  
pp. S218
Author(s):  
H. Hagenmüller ◽  
T. Kohler ◽  
S. Hofmann ◽  
H.P. Merkle ◽  
L. Meinel ◽  
...  

2021 ◽  
Author(s):  
Runyu Zhang ◽  
Huiluo Chen ◽  
Huiyang Luo ◽  
Sadeq Malakooti ◽  
Simon Oman ◽  
...  

2018 ◽  
Vol 41 (4) ◽  
pp. 360-369
Author(s):  
Anastasia Bakopoulou ◽  
Peter Hoang ◽  
Ali Fathi ◽  
Matthew Foley ◽  
Colin Dunstan ◽  
...  

SummaryObjectiveThe aim of this study was to assess the potential of improving orthodontic miniscrews’ (MSs) primary stability in vivo by evaluating the dispersion capacity of an injectable bone graft substitute (iBGS) through a newly designed hollow MS [The Sydney Mini Screw (SMS)] and its integration with the cortical and trabecular bone by using the femur and tibia in a New Zealand rabbit animal model.MethodsIn total, 24 MSs were randomly placed in each proximal tibia and femur of 6 New Zealand rabbits with an open surgery process. Aarhus MSs were used as controls and the effect of injection of iBGS was studied by implanting SMSs with and without iBGS injection. The dispersion of iBGS and the integration of the SMS were studied by using micro Computed Tomography (μCT) and histochemical analysis at two time points, 0 day and 8 weeks post-implantation.ResultsiBGS was successfully injected through the SMS and hardened in situ. After 8 weeks, μCT results revealed that the iBGS particles were resorbed and bone tissue was formed around the SMS and within its lateral exit holes.ConclusionsThis pilot animal study showed the high potential of the combined use of iBGS and SMS as a newly developed technique to promote the primary stability of MSs.


RSC Advances ◽  
2015 ◽  
Vol 5 (9) ◽  
pp. 6893-6905 ◽  
Author(s):  
Georg Hofmann ◽  
Amélie Rochet ◽  
Elen Ogel ◽  
Maria Casapu ◽  
Stephan Ritter ◽  
...  

Catalyst aging effects are analyzed using X-ray absorption micro-computed tomography in combination with conventional characterization methods on various length scales ranging from nm to μm to gain insight into deactivation mechanisms.


Sign in / Sign up

Export Citation Format

Share Document