Learning the Resistance Coefficients of Pendulum Motion Using Balls of Various Sizes

2021 ◽  
Vol 71 (12) ◽  
pp. 1067-1075
Author(s):  
Kyung-Ryul LEE ◽  
Young-Gu JU*
Keyword(s):  
Pendulum Motion ◽  
Resistance Coefficients

Time Dependances of the Resistance Coefficients of Polymeric Materials

INEOS OPEN ◽  
2020 ◽  
Vol 3 ◽  
Author(s):  
A. V. Matseevich ◽  
◽  
A. A. Askadskii ◽  
Keyword(s):  
Time Dependence ◽  
Physical Mechanism ◽  
Polymeric Materials ◽  
Resistance Coefficient ◽  
Constant Stress ◽  
Time To Rupture ◽  
Structure Sensitive ◽  
Material Durability ◽  
Resistance Coefficients ◽  
Extremal Character

One of the possible approaches to the analysis of a physical mechanism of time dependence for the resistance coefficients of materials is suggested. The material durability at the constant stress is described using the Zhurkov and Gul' equations and the durability at the alternating stress—using the Bailey criterion. The low strains lead to structuring of a material that is reflected in a reduction of the structure-sensitive coefficient in these equations. This affords 20% increase in the durability. The dependence of the resistance coefficient assumes an extremal character; the maximum is observed at the time to rupture lg tr ≈ 2 (s).

THE PROBLEM OF IDENTIFICATION OF HYDRAULIC RESISTANCE COEFFICIENTS IN MAKISTRAL GAS PIPELINE

2021 ◽  
pp. 6-11
Author(s):  
G. Gasymov
Keyword(s):  
Hydraulic Resistance ◽  
Group Identification ◽  
Numerical Approach ◽  
Transportation Systems ◽  
Gas Pipeline ◽  
Closed Loops ◽  
Hydraulic Network ◽  
Resistance Coefficients ◽  
Operating Regimes

A numerical approach, based on obtaining design formulas for the determination of hydraulic resistance coefficients of sites in pipeline transportation systems in the presence of the results of observations over a gas pipeline operating regimes, is proposed. The representation of the hydraulic network in the form of a directed graph allows to essentially reduce the number of equations in the system down to the number of closed loops. In the software implementation of the method described, for the solution of practical problems, group identification of the hydraulic resistance coefficients is provided for every eventuality.

Tribological Characteristics of Thermomechanically Processed 7075 Al Alloy Through Nano-scratch Characterization

2021 ◽  
pp. 135065012110397
Author(s):  
Souriddha Sanyal ◽  
Ashoktaru Chakraborty ◽  
Angshuman Sarkar ◽  
Susanta K Pradhan ◽  
Utpal Madhu ◽  
...  
Keyword(s):  
Dislocation Density ◽  
Tribological Characteristics ◽  
Temperature Deformation ◽  
Al Alloy ◽  
Thermal Treatments ◽  
Plastic Energy ◽  
Recovery Resistance ◽  
Aa 7075 ◽  
Hardness Values ◽  
Resistance Coefficients

Age-hardenable Al–Zn–Mg–Cu (AA 7075) alloys can be fortified by precipitation solidifying because of precipitation of the MgZn2 intermetallic stages. Furthermore, grain refinement and high dislocation density can also be opted for strengthening purposes. A low-temperature deformation enhances the dislocation density and also facilitates the grains recovery to strengthen the component. The present study combines artificial aging (at 120 °C) and sub-zero (∼−20 ˚C) temperature rolling to achieve strengthening. Various sequences and combinations of these mechanical and thermal treatments are performed and the effects of these treatments on the tribological characteristics of the alloy are studied by nano-scratch measurements. The tribological characteristics are indicated by coefficient of friction ( μ), plastic energy ( PE), recovery index ( η), recovery resistance parameter ( Rs), etc. of each sample. The widths of the scratch are further utilized to calculate the scratch hardness values ( Hs), wear resistance coefficients ( Rw) and the coefficient of wear ( K) with the help of Archard's equation.

scholarly journals The geometric parameters of plants on the spur dykes in a selected section of the Odra River

2018 ◽  
Vol 45 ◽  
pp. 00110
Author(s):  
Magda Hudak
Keyword(s):  
Water Surface ◽  
Flow Resistance ◽  
Water Levels ◽  
Flow Conditions ◽  
Plant Structure ◽  
Central Section ◽  
Quantitative Characteristics ◽  
Odra River ◽  
The Impact ◽  
Resistance Coefficients

Spur dykes are structures for regulating rivers. They are designed for medium water levels, when spur dyke tops are above the water surface. In the central section of the Odra River the water level is changeable, and the spur dykes work in different hydrological conditions: as non-submerged and submerged. Correct recognition of the plant structure growing on the spur dykes is of great importance in the context of the subsequent allocation of its measure related to the hydraulic action, among others coefficients of resistance of plant zones and refers mainly to grasses. In hydraulic calculations, it is required to determine the value of flow resistance coefficients. In such a departure, the flow is omitted in the area occupied by vegetation. Therefore, it is necessary to know the quantitative characteristics of overgrowth. Vegetation should be presented in the form of a model reflecting the impact of plants growing on the spur dykes and their impact on the water flow conditions in the river. Literature data are not very numerous and are still awake unsatisfied. The paper presents the results of research on the density of vegetation on the Odra River in the Nowa Sól region.

Friction and resistance coefficients by end launching

2015 ◽  
pp. 561-565
Author(s):  
K Žiha ◽  
T Uroda ◽  
R Fabris ◽  
M Ivančević
Keyword(s):  
Resistance Coefficients

scholarly journals Effect of the Magnetic Force on Ferrite Pendulum Oscillation Parameters: Parametric Analysis on Ferrite Pendulum

2020 ◽  
Vol 3 (1) ◽  
pp. 1
Author(s):  
Rusli Adi ◽  
Moh Toifur ◽  
Ishafit Ishafit ◽  
Rosly Jaafar
Keyword(s):  
Magnetic Force ◽  
Maximum Amplitude ◽  
Deviation Angle ◽  
Pendulum Motion ◽  
Damping Force ◽  
Initial Deviation ◽  
Initial Stage ◽  
Angle Of Deviation ◽  
Force Variation ◽  
Pendulum Oscillation

The magnitude of the damping force of the mathematical pendulum swinging on a medium is usually proportional to the speed of the pendulum. In this research, the pendulum oscillation parameters oscillating on an air medium under the influence of a magnetic field of 1.8 G will be investigated. In the initial stage, the effect of the magnetic force on the damping coefficient of ferrite pendulum oscillations with an initial deviation of 15 degrees observed. Furthermore, the study continued with varying the angle of deviation from 5 degrees to 25 degrees. The results of the data fitting amplitude (xi) at various swing times (ti) are using to analyze the effect of the angle of deviation on the maximum amplitude. The results showed that for the deviation angle of 15o the coefficient of damping of the medium affected by the magnetic force was 0,0022 greater than the coefficient of air damping 0,00006. It affects the amplitude, which decreases faster than the pendulum amplitude without the influence of magnetic force. Variation in the angle of deviation also affects the amplitude of the pendulum. In the deviation angle below 10, the pendulum motion is more influenced by the magnetic force, whereas in the deviation above 10, the pendulum motion is more dominated by gravity.

scholarly journals The inverse coefficient problem of heat transfer in layered nanostructures

2017 ◽  
Vol 20 (3) ◽  
pp. 213-219
Author(s):  
K. K. Abgarian ◽  
R. G. Noskov ◽  
D. L. Reviznikov
Keyword(s):  
Heat Transfer ◽  
Inverse Problem ◽  
Thermal Resistance ◽  
Transfer Problem ◽  
Dominant Role ◽  
Rapid Development ◽  
Problem Solution ◽  
Microwave Range ◽  
Contact Thermal Resistance ◽  
Resistance Coefficients

The rapid development of electronics leads to the creation and use of electronic components of small dimensions, including nanoelements of complex, layered structure. The search for effective methods for cooling electronic systems dictates the need for the development of methods for the numerical analysis of heat transfer in nanostructures. A characteristic feature of energy transfer in such systems is the dominant role of contact thermal resistance at interlayer interfaces. Since the contact resistance depends on a number of factors associated with the technology of heterostructures manufacturing, it is of great importance to determine the corresponding coefficients from the results of temperature measurements.The purpose of this paper is to evaluate the possibility of reconstructing the thermal resistance coefficients at the interfaces between layers by solving the inverse problem of heat transfer.The complex of algorithms includes two major blocks — a block for solving the direct heat transfer problem in a layered nanostructure and an optimization block for solving the inverse problem. The direct problem was formulated in an algebraic (finite difference) form under the assumption of a constant temperature within each layer, which is due to the small thickness of the layers. The inverse problem was solved in the extreme formulation, the optimization was carried out using zero-order methods that do not require the calculation of the derivatives of the optimized function. As a basic optimization algorithm, the Nelder—Mead method was used in combination with random restarts to search for a global minimum.The results of the identification of the contact thermal resistance coefficients obtained in the framework of a quasi-real experiment are presented. The accuracy of the identification problem solution is estimated as a function of the number of layers in the heterostructure and the «measurements» error.The obtained results are planned to be used in the new technique of multiscale modeling of thermal regimes of the electronic component base of the microwave range, when identifying the coefficients of thermal conductivity of heterostructure.

Sign in / Sign up

Export Citation Format

Share Document